Makita GA4550R 110V
Cutting Discs366
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
The Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards that are ensur more→ed by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of stones. Pack of 1 • Reliable Cuts in All Types of Stone • Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone • Optimised diamond matrix delivers solid results • High-quality standards are ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 115 Bore diameter mm: 22.23 Cutting width mm: 1,6 Segment height mm: 10 …
 |
The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. more→Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. Pack of 1 • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • High-quality standards ensured …
 |
The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.With depressed centre• Reilable Performance in Stone• Standard for Stone cutting disc cuts reliably in stone• The silicon carbide and resin blade is specifically designed for work on stoneSpecificat
 |
This premium-quality ceramic alumina provides the ultimate performance with the longest life and fastest cutting rate across all abrasives. It has a self-sharpening feature which increases high stock more→removal and durability. The strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock …
 |
The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding more→applications while delivering good results. Moreover, the disc's precision-manuf
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 115mm Bore: 22mmGrit: 80Additional Information:&bu
 |
120.49Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Specifications:
Wire & Cup Brushes213
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £30.95 up to £31.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £17.49
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features
 |
Price from £6.95 up to £7.76
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £3.00 up to £4.54
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
 |
Price from £6.05 up to £6.49
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
