Makita RP1111C
Diamond Core Bits & Milling Cutters797
 |
Trend Craft Pro 1/4in shank straight router cutter - 9/32in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber b more→ased materials. 7.1mm wide X 19.1mm cutting depth with bottom cut feature for increased diversity including light morticing. Matched 9/32in imperial diameter, for use with matched fit to imperial dimensions for precise fitting, deep cutting profile for small furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • …
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 26.5mm • Overall Length: 80mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 8 m more→m • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2
 |
Two fute flush frimming fits with ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Features and Benefits Highly durable Tungsten Carbide more→construction Suitable for straight or shaped work Typical Applications Ideal for trimming and bevelling plastic laminate edges
 |
This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood hardwood chipboard plywood and MDF. Supplied in a plastic carry c more→ase. Contains: 2 x Straight Cutters: 6.3 x 16 12.7 x 25mm1 x V-Groove Cutter: 45° x 12.7mm2 x Guided Round Over: R6.35mm R9.5mm1 x Guided Ogee: R4mmPTDTRESET6P
 |
Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 &bul more→l; Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Angle: 60
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/4 x 1/4 TCT Two Flute Cutter has the following specification: D: 8mm (5/16in)C: 19mmOL: 52mmShank Diameter: 1/4inPTDTRE3414
 |
These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 4.7 • Cut Length Imperial: 3/16 • Overall Length Metric: 63.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 10
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
