Makita RP1803
Diamond Core Bits & Milling Cutters548
 |
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 56 • Bearin more→g Dia Metric: 12.7 • Angle: 60
 |
Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should b more→e used with a coolant, wax stick or lubricant. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. For grooving and profiling of aluminium and plastics. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 65
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 7.14 • Cut Length Imperial: 9/32 • Bearing Dia Metric: 22.2 • Bearing Dia Imperial: 7/8 • Sawbore: 9.5 • Sawbore Imperial: 3/8
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 58
 |
For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metri more→c: 13.5 • Overall Length Metric: 57 • Radius 1 Metric: 6.3
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 6.0mm • Shank Diameter: 5mm • Overall Length: 45mm • Capacity: 1.5mm - 6.0mm Features and Benefits • Pro more→duces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Trend Snappy Countersink - 82 degree included angle Made from tool steel with an 82degree pitch, the countersink is an affordable, quality solution for all your general countersinking needs. Direct more→fit to Trend Snappy and compatible chucks for fast swaps between bits as required. Designed for use in hard and softwoods and abrasive materials such as ply, MDF and chipboard. Short overall length ideal for work in tighter spots. Fast cutting for clean countersinking across the ranges of suitable materials. Specifications • Shank Diameter: 1/4 hex • Dia Metric: 15.8 • Angle: 82
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
