Makita RP1803J
Diamond Core Bits & Milling Cutters956
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 8 mm • Dia Metric: more→2 • Dia Imperial: 5/64 • Cut Length Metric: 5 • Overall Length Metric: 50
 |
This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood hardwood chipboard plywood and MDF. Supplied in a plastic carry c more→ase. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45° x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.PTDTRESET6
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 16 • Overall Length Metric: 71
 |
1/4 Groove 12.7mm x 90° TCT Router BitPTDDRPDIR75336"
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 7.5 • Dia Imperial: 9/32 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 51
 |
Trend Craft Pro 1/2in shank straight router cutter - 10mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber bas more→ed materials. 10mm wide X 25mm cutting depth with bottom cut feature for increased diversity including medium duty shallow morticing. 1/2in shank for heavier work loads, ideal for router table work for increased control on grooves and rebates, matched diameter for stringing and banding for precision fit. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe …
 |
Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces and give more→s sharp corners. The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing. The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 11 • Overall Length Metric: 51 • Bearing Dia Metric: 4.8
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/6 x 1/2 TCT Two Flute Cutter has the following specification: D: 20mm (25/32in)C: 25mmOL: 66mmShank Diameter: 1/2inPTDTRE4612
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
