Antennas for Routers

2.4GHZ 3DBI 5GHZ 3.5DBI

OMNIDIRECTIONAL WI-FI ANTENNA: 2 dBi (2.4 GHz)/4 dBi (5 GHz), MIMO (4 dual-band ports). designed for dual-band port access points such as the Aironet 1830, 1850, 2800 and 3800 Series and Cisco Catalyst 9115AX, 9120AX and 9130AX Series CONNECTION AND MOUNT: Ceiling mount (hardware included). 4 plenum-rated 3-foot pigtail cables with 4 RP-TNC connectors 360-DEGREE RADIATION PATTERN: Intended for deployment when coverage in all directions from the antenna is required PERFORMANCE: Designed for improved coverage PEACE OF MIND: 1-year limited hardware warranty

OMNIDIRECTIONAL WI-FI ANTENNA: 3 dBi (2.4 GHz)/2 dBi (5 GHz), MIMO (4 dual-band ports). for use with Aironet 1830, 1850, 2800 and 3800 Series and Cisco Catalyst 9115AX, 9120AX and 9130AX Series access points CONNECTION AND MOUNT: Wall mount. 8-foot antenna cable 360-DEGREE RADIATION PATTERN: Intended for deployment when coverage in all directions from the antenna is required PERFORMANCE: Designed for improved coverage PEACE OF MIND: 1-year limited hardware warranty

OMNIDIRECTIONAL WI-FI ANTENNA: 4 dBi (2.4 GHz)/7 dBi (5 GHz). suitable for use on Aironet outdoor access points in hazardous locations CONNECTION AND MOUNT: N-type male connector. direct mount on access point. no cable attachments 360-DEGREE RADIATION PATTERN: Intended for deployment when coverage in all directions from the antenna is required PERFORMANCE: Designed for improved coverage PEACE OF MIND: 1-year limited hardware warranty

OMNIDIRECTIONAL WI-FI ANTENNA: 4 dBi (2.4 GHz)/4 dBi (5 GHz), MIMO (4 dual-band ports). designed for dual-band port access points such as the Aironet 1830, 1850, 2800 and 3800 Series and Cisco Catalyst 9115AX, 9120AX and 9130AX Series CONNECTION AND MOUNT: Wall or mast mount, 36-inch cables and RP-TNC connectors 360-DEGREE RADIATION PATTERN: Intended for deployment when coverage in all directions from the antenna is required PERFORMANCE: Designed for improved coverage PEACE OF MIND: 1-year limited hardware warranty

PATCH ANTENNA: 8 dBi (2.4 GHz)/8 dBi (5 GHz). 3 ports. can be used with outdoor access points CONNECTION AND MOUNT: 3 N-type connectors. no cable attachments. wall or mast mount DIRECTED RADIATION PATTERN: Intended for deployment when directed coverage is required PERFORMANCE: Designed for improved directional coverage PEACE OF MIND: 1-year limited hardware warranty

PATCH ANTENNA: 6 dBi (2.4 GHz)/6 dBi (5 GHz). 4 dual-band ports. designed for use with dual-band port access points such as the Aironet 1830, 1850, 2800 and 3800 Series and Cisco Catalyst 9115AX, 9120AX and 9130AX Series CONNECTION AND MOUNT: 4 plenum-rated 36-inch cables and RP-TNC connectors. wall mount DIRECTED RADIATION PATTERN: Intended for deployment when directed coverage is required PERFORMANCE: Designed for improved directional coverage PEACE OF MIND: 1-year limited hardware warranty

Pulled from functioning environment. Fully covered by A to Z warranty Same day shipping if purchased before 4PM CST, Monday through Friday One year end user warranty Please contact Core 4 Solutions for questions about expedited shipping, item condition, warranty etc. Core 4 Solutions has served over 18,900+ satisfied IT buyers.

AIR-ANT5135D-R

Connector type: RP-TNC At 54 Mbps this antenna gives approximately 114 ft of coverage Compatibility: All radios that use a RP-TNC antenna connector

Cisco Used - Good AIR-ANT3213

Wireless

PBE-5AC-620

767283

PBE-2AC-400

AIRANT5160VR Polarization Vertical Azimuth 3dB BW Omnidirectional 360 degrees AIRANT5160VR Polarization Vertical

3

AIRANT2410YR Frequency Range 24GHz to 2483GHz Gain 10dBi Antenna connector RPTNC Elevations plan 3dB BW 40 degrees

5 GHz RocketDish to airFiber X Antenna Conversion Kit The kit converts the RocketDish RD-5G30 or RD-5G34 antenna for use with an airFiber X radio 45° slant polarity