Effects Pedals

Pedal Design Foot Pedal

Analog bucketbrigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slapback echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and firstclass electronic on/off switch that offers noisefree operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Delay;Echo
Power …

Overdrive effect pedal that was designed specifically for bass guitars and supports their entire frequency range, including 5and 6string basses, and delivers rich, tubelike distortion, smooth sustain and fat tone. Effect provides unique Balance control for mixing the overdriven signal with natural dry bass sound, as well as dedicated Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and topquality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Distortion;Overdrive;Equalizer
Made in: China…

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and topquality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
UK/EU Power supply included: No
Power Supply: Adapter
Made in: China
Battery Operation: Yes
Type: Fuzz

The Behringer OD300 lets you combine and balance overdrive and distortion to find your ultimate dirt tone. This is achieved thanks to clever design inside are two separate circuits- 1 for overdrive and another for distortion (identical circuitry to a famous orange distortion pedal and yellow overdrive). The pedal then lets you blend these signals together with the added ability to tweak gain level and adjust tone for even more sonic adaptability. The end result is the most customisable dirt tone on the market.

The Behringer CL9 Compressor/Limiter Pedal allows you to balance every aspect of your performance. Ensuring each note rings at a similar volume consistently guaranteeing that quiet notes cut through the mix while louder and harsher notes are dampened to ensure that they arent lost within the performance. This allows you to play with subtle nuance while also having the peace of mind that each aspect of your playing is captured perfectly.

The Behringer NR300 Noise Reduction Pedal is the perfect device for removing pesky hum from your mix caused by your pickups. Protecting your sound it ensures absolute clarity for crisp clean notes all of which have that unwanted background noise that is more synonymous with single-coils removed from its mix. A dedicated combination of threshold and decay controls that let guitarist alter their sound at any time for the perfect performance.

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Equalizer
Battery Operation: Yes
Power Supply: Adapter
Made in: China…

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Made in: China
Power Supply: Adapter
UK/EU Power supply included: No
Type: Equalizer

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Type: DI Box
UK/EU Power supply included: No
Made in: Germany

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most soughtafter tube amp sounds – from clean to crunch to superfat distortion.
Type: Tube Amp Modeler;Equalizer;Distortion
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Made in: China
UK/EU Power supply included: No
Type: DI Box;Preamp

The Sweet Baby pedal from JOYO audio is a top-performer distortion pedal and it has a price-point which makes it a possible selection for any player. The JF-36 model has a focus knob, as well as highly usable volume and drive controls, which all have great range. Together these controls allow you to shape unique tones: From sweet and soothing to all-out rage. Distortion pedals usually don't have as much output as this little monster and the true-bypass wiring keeps your signal integrity at maximum while the gain circuit is not engaged. This JOYO product is built to last with quality components and a sturdy shell casing. With tones from The rolling Stones to ACDC, this pedal can cover a lot of …

A 2-way latching footswitch for DSL5, DSL20C, DSL20H, DSL40 and DSL100. The first switch will enable you to change between the ultra gain and classic gain channels. The second switch is an FX loop bypass. There are built in indicator lights that notify you when the switch is active or not.
Compatible with: DSL40;DSL20C;DSL20H;DSL5;DSL100;Nikon DSLR
Colour: Black
Number of Buttons: 2
Type: Footswitch
Made in: China
Power Supply: Passive

True bypass guitar distortion effect. Effect is controlled with Level, Voice and Drive controllers and a 3 band EQ. Reproduces the classic sound of the '57 Deluxe amplifier. Powered by 9V battery or DC 9 V adapter. Dimensions are 118 x 87 x 38 mm. Weight: 460 g. Product comes in bronze finish.
True Bypass: Yes
Battery Operation: Yes
Type: Distortion
Made in: China
Power Supply: Adapter or Battery
Battery Type: 9V
UK/EU Power supply included: No

Analogue modelling acoustic guitar preamp/stompbox with DI recording output that has been designed to compete head to head with leading products on the market. Its authentic tube/microphone modelling circuitry provides the natural warmth and presence, as if the acoustic guitar was miked through a tube pre-amp. It features the ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezo pickups; dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode; and ground lift switch that eliminates typical ground loop problems. Device has super-high impedance to retain …

Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater versatility, while true hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. Pedal features a durable metal chassis and switches that withstand onstage wear and tear, and LED illumination (requires 9 V battery or power source). Dimensions: 127 x 83 x 51 mm.
Made in: China
Number of Buttons: 2

The JOYO JF-323 Wooden Sound Acoustic Simulator pedal it is set to impress with its simulation of an acoustic sounding guitar. Turn your electric guitar into an acoustic one at the press of a button. With the latest mini pedal from JOYO the Wooden Sound Acoustic Simulator effect expands the range of your guitar tone without swapping out your guitar mid track, or compensating on the mix. With four controls, one each to adjust the High, Mid, Bass and Volume levels you can dial in the exact tone that you want. An amazingly nice pedal that punches above it's price range. Unlike a lot of acoustic simulator pedals this one actually sounds like you are playing an acoustic through a PA rather than just …

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Type: Rotary;Phaser
Made in: China
UK/EU Power supply included: No

Express yourself. Like never before. The Electro Harmonix Cntl Knob Static Expression Pedal gives you versatile control of any device with expression control jacks. This is everything you want from an expression pedal at a fraction of the size. Powerful effects. All at the touch of a button. The Cntl Knob lets you set two preset values representing two positions of a traditional expression pedal. With one click you can toggle between them giving you access to a wealth of vastly different sounds. And with a TRS+/- switch on board the Cntl Knob proves highly flexible. This is everything you need to upgrade your rig.

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Width (cm): 4.2
Length (cm): 7.4
Type: Buffer
Outputs: Mono
Inputs: Mono
True Bypass: None
Battery Operation: No
UK/EU Power supply included: No
Depth (cm): 3.3
Power Supply: 9V DC ( - …

The NUX NCP-2 Sculpture Mini Compressor is a powerful tool for sharpening your tone like an axe. It compresses your signal taming the loudest parts and boosting the quietest massively increasing sustain and articulation. Your solos will cut through the mix and your low end will sound super tight for rhythm playing. You can experiment with no clipping soft clipping and hard clipping each of which will create a different voicing for your riffs. The Blend and Sustain dials let you further control your tone adjusting the dry/wet compressor effect and length of time your notes ring out respectively. Its time to sculpt your sound to perfection.

NU-X Morning Star is a blues drive pedal with a twist. Along with standard Drive, Level and Tone controls, holding the on/off pedal engages a Shine mode, which boosts the high frequencies adding sparkle to cut through a mix. Wide ranging gain adjustment offers tones from natural break-up to thick authentic overdrive. Enough range for blues to full-on rock styles. Features: Drive, Tone and Level controls True or buffered bypass operation Switchable Shine treble boost effect Requires 9V centre negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Input impedance: 1M Ohm Output …

Eyemaster Metal Distortion brings back the original metal credo of "loud and brutal" with its "simpler-than thou" 2-knob operation. Just set the volume (all the way up, right?) and adjust the gain (anything less than all-the-gain is sacrilege) and start riffing. Eyemaster was specifically designed to channel the Swedish death metal tone, endearingly nicknamed the "Swedish buzzsaw". As that term implies, Eyemaster is not a subtle overdrive. It is not transparent and it does not "sit well in a mix". Rather, it burns an unholy path straight through the mix. The concept of gain is something we often take for granted but rarely do we stop and think about what the term actually implies. These days,…