Batteries for Drones & RC models TAMIYA

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper…

Made of lightweight and highly rigid aluminum, the surface is hard-coated alumite to improve surface lubricity. (From Amazon.co.jp)

Used in place of the standard K9 and K10 parts. A 3mm thick carbon stiffener with minimal deflection or bending increases chassis rigidity around the rear, maximizing the damper's operating effect and allowing for more delicate settings. Also included are 3 x 10mm countersunk screws and 3 x 8mm countersunk screws required for assembly. (From Amazon.co.jp)

We have set all the turnbuckle shafts necessary to adjust the camber angle and toe-in of the TT-02B chassis. A total of 7 pieces: front upper arms (one each on the left and right), rear upper arms (one each on the left and right), steering tie rods (one each on the left and right), and steering linkage. You can adjust the length without removing the adjuster, and setting is quick. A plate wrench for length adjustment is also included. [Applicable car models/parts] TT-02B chassis. (From Amazon.co.jp)

The attachment part of the suspension shaft consists of a separate resin bushing part. By replacing the bushes, delicate settings of toe angle, vehicle width, roll center, and skid angle are possible. Made of blue anodized aluminum. *Batteries and batteries are not included with this product. (From Amazon.co.jp)

Rebound stopper for TT-02 TYPE-S reversible suspension. It is possible to change the handling characteristics by regulating the amount of rebound. Cutting parts from metal. To use this part, 54636 Suspension Mount FF or 54637 Suspension Mount RR is required. (From Amazon.co.jp)

The weight of the drive system has been significantly reduced by replacing it with aluminum parts. Comes with pin protector. Protects the cup and drive shaft from severe wear. Highly lubricated alumite specification. (From Amazon.co.jp)

Product Features Franchise: MINI 4WD Brand: TAMIYA Color: Multicolor Year Manufactured: 2011 Type: Mortor Theme: Cars & Vehicles Signed: No Language: Japanese Features: Parts

Main country of manufacture: Japan

Hop-up Options Op.950 Tgm-04 Zero-ru Bevel & Ring GearTamiya OP parts OP.950 TGM-04 Zerorubeberu & ring gear 53950

Main country of manufacture: Japan

The left and right suspension arms can be assembled separately for the standard U-shaped shaft, which is integrated on the left and right, making maintenance easier. A strong support bridge made of steel holds the stainless steel suspension shaft, reducing suspension arm play and producing smooth operation. (From Amazon.co.jp)

This is a carbon damper stay that is used in place of the standard M4 part on the TB-03 chassis. By installing a highly rigid carbon damper stay with little deflection or bending, the damper's operating effect is maximized and more delicate settings are possible. There are 4 damper mounting holes. Plate thickness = 3.0mm. Adapted to TB-03 chassis each car. *Note: The body mount position is different from the kit standard. (From Amazon.co.jp)

Used in place of the standard resin T2 parts. Increases the mounting rigidity of the damper stay and ensures that delicate changes in damper settings are reflected. Made of blue anodized aluminum. (From Amazon.co.jp)

Main country of manufacture: Philippines

ITEM56360 Volvo FH16 Globetrotter 750 A long cord equipped with a 3mm diameter yellow LED for turn signals, which is required when installing an MFC unit on a 6x4 timber truck. Comes with a connector, making it easy to connect to an MFC unit. Basic specs: 3mm diameter yellow color LED, 2 sets, cord length 1100mm. *This product does not include batteries or power supply.

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars.

Protects the motor from flying stones from the road and driving on rocky areas. The heat sink effect increases the heat dissipation of the motor and prevents heat sag. It is also attractive that the motor can be fixed even more securely using the cap screw. The blue anodized specification also has a dress-up effect. Applicable products: G6-01, GF-01, WR-02 chassis various. (From Amazon.co.jp)

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars. [Applicable products] 58192 King Blackfoot. 58231 Wild Dagger. 44025 Mad Bison. Contains 2 pieces. (From Amazon.co.jp)

To maintain the best condition at all times, replace worn or fatigued parts as soon as possible. Please use it for repair and maintenance of RC cars. Compatible chassis: M-07 CONCEPT chassis. Customer gender: unisex

Main country of manufacture: Japan

Target gender: Boys Main country of manufacture: Japan

Main country of manufacture: Japan

(ITEM 54590)