SFP Transceivers Allied Telesis

If you´re passionate about.IT and electronics.like being up to date on technology and don´t miss even the slightest details, buy.MonoMode SFP Fibre Module Allied Telesis AT-SPSX.at an unbeatable price.Product with plug:Yes.Type of plug:Plug EU.Speed:1250 Mbit/s.Wavelength:850 nm.Noise level:30 dB.Type:MonoMode SFP Fibre Module.Transceiver.

Allied Telesis AT-SPTX-90. SFP transceiver type: Copper. Maximum data transfer rate: 1000 Mbit/s. Interface type: SFP

Gigabit Small Form-Factor Pluggable ModulesThe Allied Telesis SP Series delivers flexible. full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.CompatibilityAllied Telesis SP Series Gigabit Small Form-Factor Pluggables (SFPs) are supported on all Allied Telesis devices with SFP uplink connections.SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant. and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.…

The ALLIED TELESIS AT-SPSX/I-90 Transceiver Grey is the ultimate choice for businesses looking for high-quality networking solutions. With its reliable performance and exceptional durability, this transceiver guarantees a seamless networking experience and enhanced efficiency. This premium-quality transceiver comes with cutting-edge features such as hot-swappable capability, pre-programmed memory, and automatic laser shutdown, making it the perfect choice for businesses of any size. This top-of-the-line transceiver is built to last and is sure to exceed your expectations. Whether you're expanding your current network or building a new one, the ALLIED TELESIS AT-SPSX/I-90 Transceiver Grey is …

SFP+ Direct attach cable, Twinax, 1m (0 to 70°C).Specifications:Features:- Cable length:1 m.- Cable standard:Cat7.- Connector 1:SFP+.- Connector 2:SFP+.- Connector 1 gender:Male.- Connector 2 gender:Male.- Connector contacts plating:Copper.Features:- Data transfer rate:10 Mbit/s Operational conditions:- Operating temperature (T-T):0.- 70 °C.- Storage temperature (T-T):-40.- 85 °C.- Operating relative humidity (H-H):0.- 85% Other.Features:- Input impedance:100 Ω.

Gigabit Small Form-Factor Pluggable ModulesThe Allied Telesis SP Series delivers flexible. full-duplex Ethernet connectivity. These hot-swappable fiber and copper interfaces simply plug into the SFP slot on all SFP-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.CompatibilityAllied Telesis SP Series Small Form-Factor Pluggables (SFPs) are supported on Allied Telesis devices with SFP uplink connections*.SP Series SFPs are Multi-Sourcing Agreement (MSA)-compliant. and fully adhere to industry standard networking regulations. This allows the SP Series to be used with other MSA-compliant platforms that support SFP uplink connections.…

The SP10TM SFP+ transceiver can be used to extend networks using an RJ45 copper connection. It supports up to 30m at 10G speeds and 100m at up to 5G speeds

The AT-SP10TW SFP+ direct attach copper cable assembly is a low-cost alternative for short reach applications. The design allows for a serial data transmission up to 12Gbps in each direction. Additionally, the copper cable acts as a natural heat sink. The low power consumption assists in making the passive copper cable assembly an economic solution for within rack or rack-to-rack applications.The direct attach cable is terminated on both ends with mechanical connectors that plug directly into SFP+ slots in the same manner as SFP+ transceiver modules.

The Allied Telesis At-Sp10sr Is A Hot Pluggable 10Gbps Small Form Factor Transceiver Module. It Is Compliant With The Sff-8431 Sfp+ Electrical Multi-Source Agreement (Msa) With Five Digital Monitoring Functions: Temperature Vcc Tx Optical Power Tx Laser Bias Current And Rx Received Optical Power.

The AT-SPLX40 offers a long-haul option to extend your network up to 40 km.

If you´re passionate about.IT and electronics.like being up to date on technology and don´t miss even the slightest details, buy.Multimode Media Converter Allied Telesis AT-PC2000/SP-960.at an unbeatable price.Product with plug:Yes.Type of plug:Plug EU.Connections:RJ45.SFP+.Range:550 m.Type:Adapter/Converter.Colour:Black.

The Allied Telesis SP10 Series offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise and service provider transport applications.These industry-standard hot-swappable devices simply plug into the Ethernet SFP+ port on all SFP+-compatible devices.Configuration can be optimized to meet a wide variety of distance and service requirements.Features:Compatibility:- Allied Telesis SP10 Series 10 Gigabit SFP+ modules are supported on all Allied Telesis devices with SFP+ uplink connections.Options:- The SP10 Series offers short-haul and long-haul solutions.From the inexpensive Allied Telesis SP10SR to the far-reaching Allied Telesis SP10ZR80/I, the network can …

Allied Telesis AT-QSFPSR4LCA network transceiver module Fiber optic 40000 Mbit/s QSFP+ 850 nm

Quad Small Form-Factor Pluggable ModulesThe Allied Telesis QSFP28 Series offers the latest industry-standardconnectivity in a flexible. small form factor. These hot-swappabletransceiver modules simply plug into any compatible Allied Telesis product.OptionsAllied Telesis QSFP28 Series 100 Gigabit Quad Small Form-Factor Pluggables (QSFPs) are supported on all Allied Telesis devices with QSFP28 uplink connections.The QSFP28 is hot-swappable to allow for network changes without removal or reconfiguration of costly network equipment.ApplicationsThe QSFP28 Series supports 100GbE interconnects. They are ideal for Datacom/Telecom switch and router connections. as well as data aggregation. backplane.…