SFP Transceivers TP-LINK

- Complies with IEEE 802.3ab and IEEE 802.3z
- FX port supports hot-swappable
- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber

The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC-Type connector. The MC220L supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving …

TP-Link MC100CM network media converter 100 Mbit/s 1310 nm Multi-mode Black

What This Product DoesN/A TL-FC311B-2 is a gigabit media converter providing a gigabit RJ-45 port and a gigabit SC fiber port which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.N/AN/AHow This Product WorksN/A TL-FC311B-2 adopts WDM (wavelength division multiplexing) technology helping send and receive data at a distance of up to 2 km with only a single mode fiber which saves half of the cable deployment cost for customers. TL-FC311B-2 transmits data at 1310 nm wavelength and receives data at 1550 nm wavelength on optical fiber. Therefore …

What This Product DoesN/ATL-FC311A-2 is a gigabit media converter providing a gigabit RJ-45 port and a gigabit SC fiber port which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.N/AN/AHow This Product WorksN/ATL-FC311A-2 adopts WDM (wavelength division multiplexing) technology helping send and receive data at a distance of up to 2 km with only a single mode fiber which saves half of the cable deployment cost for customers. TL-FC311A-2 transmits data at 1550 nm wavelength and receives data at 1310 nm wavelength on optical fiber. Therefore …

Highlights: Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards. Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely Provides Switch Configuration Of Half-Duplex / Full-Duplex Transfer Mode For Fx Port. Extends Fiber Distance Up To 20Km     What This Product Does The Mc110cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate.…

TP-Link MC112CS network media converter 100 Mbit/s Single-mode Black

TP-Link MC111CS network media converter 100 Mbit/s Single-mode Black

Features: - 1× 10/100/1000mbps Auto-Negotiation Rj45 Port Supports Auto-Mdi/Mdix- Auto-Negotiation Of Half-Duplex/Full-Duplex Transfer Mode- Adopts Wdm Technology, Transmitting And Receiving Data On One Single Fiber- Extends Fiber Distance Up To 20 KmWhat This Product Does:- Tl-Fc311b-20 Is A Gigabit Media Converter, Providing A Gigabit Rj-45 Port And A Gigabit Sc Fiber Port, Which Can Convert Between Electrical And Optical Signals. And Long-Distance Data Transmission Through Optical Fiber Can Be Applied To Commercial Scenarios Such As Park Security Monitoring And Wireless Networking.How This Product Works:- Tl-Fc311b-20 Adopts Wdm (Wavelength Division Multiplexing) Technology, Helping Send A…

Complies with IEEE 802.3ab and IEEE 802.3z standards.-Ability to set the switch for Force/Auto transfer modes for the FX port.-Increases the range of fiber optics up to 15km.The MC210CS is a multimedia converter designed to convert 100BASE-LX/LH fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH, the MC210CS is used with single-mode optical fiber using the SC connector.The MC210CS supports shortwave (SX) laser at full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (no rack required) or with TP-LINK´s 19´´ system rack, Auto MDI/MDI-X for…

TP-LINK TL-FC311A-20 V2 - Fibre media converter - 1GbE - 1000Base-T, WDM, 1000Base-SC - RJ-45 / SC single-mode - up to 20 km - 1310 (RX) / 1550 (TX) nm

Complies with IEEE 802.3ab and IEEE 802.3z standards.-Ability to set the switch for Force/Auto transfer modes for the FX port.-Increases the range of fiber optics up to 0.5km.The MC200CM is a multimedia converter designed to convert 100BASE-SX fiber to 1000Base-T cable or vice versa.Designed to IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX, the MC200CM is used with multimode optical fiber using the SC connector.The MC200CM supports shortwave (SX) laser at full wire speed transfer rate.It works at 850nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (no rack required) or with TP-LINK´s 19´´ system rack, Auto MDI/MDI-X for the…

TP-Link 10G BASE-T RJ45 SFP+ Module

TP-Link Omada 10/100 Mbps WDM Media Converter

TP-LINK TL-FC111B-20 - Fibre media converter - 100Mb LAN - 10Base-T, 100Base-TX, WDM - SC/UPC single-mode / RJ-45 - up to 20 km - 1550 (RX) / 1310 (TX) nm - for JetStream TL-SG3452XP V1

1000Base-BX WDM Bi-Directional SFP Module
 
- Up to 20 km transmission distance with 9/125 μm SMF (Single-Mode Fiber)
- Bidirectional WDM communication on a single fiber
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Hot-swappable module design
- Work with TL-SM321A as a pair  

        What This Product Does
TP-Link´s TL-SM321B adopts the latest standard 1000Base-BX transmitting over one single-mode fiber with one different wavelength going in each direction. Paired with TL-SM321A You can extend the network distance …

TP-Link TL-SM311LS network transceiver module Fiber optic 1250 Mbit/s mini-GBIC/SFP 1310 nm

TP-Link MiniGBIC Module

TP-Link 10GBase-SR SFP+ LC Transceiver

TP-Link 1000BASE-T RJ45 SFP Module

1000Base-BX WDM Bi-Directional SFP Module
 
- Adopts the latest standard 1000Base-BX
- Up to 2 km transmission distance in 9/125 μm SMF (Single-Mode Fiber)
- Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
- Supports Digital Diagnostic Monitoring (DDM)
- Supports Hot Swappable    
  What This Product Does
TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link is up to 2 km in 9/125 μm SMF …

Specifications:Features:- Cable length:1 m.- Connector 1:SFP+.- Connector 2:SFP+.- Connector 1 gender:Male.- Cable type:DAC.Features:- Transfer rate:10 Gbit/s Operational conditions:- Operating temperature (T-T):0.- 70 °C.- Storage temperature (T-T):-40.- 80 °C Packaging data:- Quantity per pack:1 pc(s).

Features:- Complete Wi-Fi Coverage At Home By Eliminating Weak Signal Areas- Dual-Band 2.4ghz (300 Mbps) And 5ghz (867 Mbps) Wi-Fi Connectivity For A More Stable Wi-Fi Experience- Creates A Mesh Network By Connecting To A Onemesh Router To Provide Seamless Coverage Throughout The Home - Adaptive Path Selection - Automatically Connects To The Fastest Connection Path To The Router And Runs At Top Speed - High-Speed Mode - Ideal For Hd Streaming And Gaming, Maximizing Speed By Using A Wifi Band As A Dedicated Backhaul - Ap Mode - Creates A Wi-Fi Access Point That Extends A Wired Network With Wi-Fi - Intelligent Signal Strength Display To Find The Best Location For Optimal Wi-Fi Coverage - Wps Button …

TP-Link DS-PMA-C+.SFP transceiver type:Fiber optic, Maximum data transfer rate:2488.32 Mbit/s, Interface type:SFP.Product color:Stainless steel.Input voltage:3.3 V.Specifications:-Input voltage:3.3 V.-Tx power (max.):7 dBmW.-Rx power (min):-30 dBmW.-Rx power (max.):-12 dBmW.-Wavelength:1490 nm.-SFP transceiver type:Fiber optic.-Maximum data transfer rate:2488.32 Mbit/s.-Interface type:SFP.-Maximum transfer distance:20000 m.-Single mode fiber (SMF) compatible:Yes.-Supported cable fiber diameters:9/125 µm.-Transmission bandwidth (max.):1490 nm.-Bandwidth for reception (max.):1310 nm.-Tx power (min):3 dBmW.-Hot-swap:Yes.-Product color:Stainless steel.

The TL-SM5110-LR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-LR high performance 1310 nm single-mode SFP+ transceiver. It supports full duplex 10G Ethernet connections up to 10 km with 9/125m fiber cables respectively.