Affordable bike Spokes
prices on 155 modelsWhen you make a purchase through links on our site, we may receive a affiliate commission.
 | Sapim Race Double Butted Single Spoke Sapim's most popular double-butted spokes, the Race, supplied here singly, provides good shock absorption and is easy to tension. |  |
 | Sapim Race Double Butted Single Spoke Sapim's most popular double-butted spokes, the Race, supplied here singly, provides good shock absorption and is easy to tension. | |
 | DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
You may be interested in
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| DT Swiss Competition J-Bend Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, with their spokes still made entirely in-house in Switzerland to the highest standards of quality and workmanship. The classic lightweight butted spoke, the Comp, is a cycling staple relied upon by everyone from commuters to World Cup downhillers; when in doubt, use Comps! The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is required. While other brands stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spokes, actually strengthening t… | |
| Sapim Race Double Butted Single Spoke Sapim's most popular double-butted spokes, the Race, supplied here singly, provides good shock absorption and is easy to tension. | |
 | DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
| DT Swiss Competition Double Straight Pull Spoke The company now known as DT Swiss has been drawing steel in Biel for over 350 years, and their spokes are still made entirely in-house in Switzerland to the highest possible standards of quality and workmanship. The classic lightweight butted spoke, known as the Comp, is a cycling classic relied upon by everyone from commuters to World Cup downhillers. The 14/15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the ends where strength is needed. Unlike other brands that stretch and weaken their spokes to butt them, DT's unique and closely patented ultrasonic peening process cold forges the spoke, actually … | |
Buy bike spokes
24 more item(s)