Cranksets CeramicSpeed

The CeramicSpeed BB86/92 bearing kit with a design that can be used to install a DUB crank. It is important to note that the inner race must be recessed by approximately 2.8mm to provide clearance for the dust cover. this is the key change in the new PF4130 that began shipping in 2018. if the inner race (and seal) is flush with the outer race, the bottom bracket cannot be converted for use with DUB cranks.Features:Compatibility with connecting rods: SRAM DUBTable/Cup: BB862 x bearing seals2 x bearing covers4 x 3mm spacers4 x 1mm spacers5 ml CeramicSpeed long-life grease

CeramicSpeed 6000 bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed 'Blue Grease' to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that …

The CeramicSpeed BB30 SRAM DUB bottom bracket is built on a 28.99 mm axle, allowing for a more contamination resistant BB design, while retaining the ultra efficient and durable qualities. With an integrated dust cover for all models, a tight and secure fit that also fully protects the bearing face offers exceptional performance without sacrifice. The handmade CeramicSpeed bearings carry the load from the connecting rod to the frame with excellent durability and efficiency.Specifications:- Mounting type: BB30- Wide bottom bracket box: 68 mm- Shaft diameter: 29 mm DUB- Compatible with: SRAM DUB connecting rodsBox contents:- 2 cups with installed CeramicSpeed bearings- 2 dust caps- 4 x 1 mm spacers- …

The CeramicSpeed BSA SRAM GXP Road bottom bracket is a traditional shell size. It has an internal diameter of 34 mm and is 68 mm wide. These cups are screwed into the BSA housing, allowing SRAM and Quarq 24/22 mm connecting rods to be installed. The CeramicSpeed kit comes with bearings pressed into threaded cups, which are then screwed into the frame. These two bearings consist of CeramicSpeed Standard or Coated Bearings. The super-soft and super-round CeramicSpeed balls rotate on hardened steel races in both. The coated version has a metal coating placed on the races, making them even harder and softer, resulting in a longer life and less resistance.The cups come with bearings installed and …

The CeramicSpeed BSA SRAM GXP Road bottom bracket is a traditional shell size. It has an inner diameter of 34mm and is 68mm wide. These cups thread into the BSA shell making it possible to install SRAM and Quarq 24/22mm spindle cranks. The CeramicSpeed kit comes with bearings pressed into threaded cups, which are then threaded into the frame. Those bearings consist of either CeramicSpeed Standard or Coated Bearings. Super smooth, super round CeramicSpeed balls are rotating in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making it even smoother and harder, resulting in longer life and lower drag.The cups come with bearings installed and a sleeve …

The CeramicSpeed T47 bottom bracket for Shimano is a newer bottom bracket shell design, which uses the oversized interface of PF30 and EVO386, but with the benefit and peace of mind of a threaded interface. This bottom bracket allows you to install Shimano and other 24 mm diameter thru-axle rods in a T47 housing. It is compatible with 86 mm wide frames.Standard CeramicSpeed bearings reduce the drag by 75% compared to standard lower housings. Down to 0.3-0.4 watts per set. This is the result of hardened steel races combined with CeramicSpeed balls that are 100% softer and 15% harder than ceramic competition. They also last longer.Specifications:- Mounting type: T47/ 68- Wide bottom bracket box: …

The CeramicSpeed T47/86 Bottom Bracket Axles for Campagnolo UT is a new bottom bracket box design with the advantage and a screw interface. This bottom bracket allows you to install Campagnolo connecting rods and other 25 mm diameter thru-axle connecting rods in a T47 case.There are 2 versions: Standard and Coated Bearings. CeramicSpeed bearings are installed on bracket cups that connect through the housing. Also, they have super-rounded CeramicSpeed and hardened steel tracks. CeramicSpeed coated bearings have an additional feature: a 3-micron thick metal layer on the raceways. This addition makes running smoother and harder, reducing drag and increasing their useful life.Box contents:2 bottom …

The CeramicSpeed BB Alpha T47/86 Campy UT Road Bottom bracket cups feature hand-crafted hardened stainless-steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The streamlined spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared with previous generations. Features:Use: RoadWeight: 220 gBottom bracket type: T47 86 mmCrank diameter: 25 mmCrank brand: Campagnolo

The CeramicSpeed BB Alpha BSA Shimano Gravel bottom bracket cups feature hand-crafted hardened stainless-steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better protection against moisture while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared with previous generations. Features:Use: GravelWeight: 193 gBottom bracket type: BSA English Threaded 68 mmCrank diameter: 24 mmCrank brand: Shimano

The CeramicSpeed BB Alpha PF 30mm MTB bottom bracket cups feature hand-crafted, hardened stainless-steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better protection against moisture while delivering ultra-low friction performance. The streamlined spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared to previous generations. Features:Use: MTBWeight: 218 gBottom bracket type: PF30 68mmCrank diameter: 30 mmCrank brand: SRAM, Easton, FSA, Rotor, Cannondale, and Race Face

The CeramicSpeed BB Alpha Bottom bracket cups for BB86 SRAM DUB Gravel feature hand-crafted hardened stainless steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared with previous generations.Features:Use: GravelWeight: 206 gBottom bracket type: BB86 Crank diameter: 28.9 mmCrank brand: SRAM

CeramicSpeed Alpha for BSA 24 mm (Shimano) Road Bottom Bracket BB Alpha is designed to outlast the frame it is fitted to, offering exceptional durability and long term performance. It features hardened stainless steel races hand built with grade 3 Silicon Nitride ceramic balls, combined with custom engineered seals and precision dust covers. This construction provides up to 500 percent better moisture protection while maintaining ultra low friction. The simplified spacer tube design and lighter cups allow quick installation and deliver a 10 percent weight saving compared with previous versions. Every CeramicSpeed BB Alpha model is supported by a lifetime warranty. CeramicSpeed Ultra Durable Co…

CERAMICSPEED Alpha Pressfit BB86 24mm Bottom Bracket CupsUnlock Ultimate Performance and Unrivaled Durability for Your RideElevate your cycling experience across any terrain with the CeramicSpeed Alpha Pressfit BB86 Bottom Bracket. Engineered for cyclists who demand the absolute best in efficiency, longevity, and all-weather reliability, this bottom bracket is more than just a component—it´s a fundamental upgrade to your bike´s core performance. Whether you´re conquering climbs in Road Cycling, navigating technical trails in MTB Cycling, or exploring mixed surfaces in Gravel Cycling, the Alpha BB86 delivers a tangible advantage in every pedal stroke.A bottom bracket built to outlast your frame…

The CeramicSpeed T47/86 Shimano bottom bracket cups use an oversized interface of PF30 and EVO386, but with the advantage and peace of mind of a threaded interface. The T47/86 places the bearings within the frame width and is compatible with Trek frames of 85.5mm width, as well as with standard 86mm wide T47 Inboard frame designs. This bottom bracket allows for the installation of Shimano cranks and other cranks with a 24mm diameter thru axle in a T47 frame.It is compatible with 86mm wide frames, and also compatible with TREK T47 frames of 85.5mm width.

The CeramicSpeed Bottom bracket cups BB Alpha T47a 30 mm Road feature hand-crafted hardened stainless-steel races with Grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared with previous generations. Features:Use: RoadWeight: 216 gBottom bracket type: T47aCrank diameter: 30 mmCrank brand: SRAM, Easton, FSA, Rotor, Cannondale and Race Face

The CeramicSpeed BB Alpha PF 30mm Shimano Gravel bottom bracket cups feature hand-crafted hardened stainless-steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared to previous generations. Features:Use: GravelWeight: 213 gBottom bracket type: PF30 68mmCrank diameter: 24 mmCrank brand: Shimano

The CeramicSpeed BB Alpha ITA Shimano Gravel Bottom bracket cups feature hand-made hardened stainless steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared to previous generations. Features:Use: GravelWeight: 192 gBottom bracket type: ITA Italian ThreadedCrank diameter: 24 mmCrank brand: Shimano

The CeramicSpeed BB Alpha T47/73 30 mm MTB bottom bracket cups feature hand-made hardened stainless steel races with Grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better protection against moisture while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared to previous generations. Features:Use: MTBWeight: 227 gBottom bracket type: T47 68 mmCrank diameter: 30 mmCrank brand: SRAM, Easton, FSA, Rotor, Cannondale, and Race Face

The CeramicSpeed BB Alpha bottom bracket cups for BB86 SRAM DUB Road feature hand-crafted hardened stainless steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The simplified spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared with previous generations.Features:Use: RoadWeight: 204 gBottom bracket type: BB86 Crank diameter: 28.9 mmCrank brand: SRAM

The CeramicSpeed BB Alpha ITA Shimano Road Bottom bracket cups feature hand-crafted hardened stainless steel races with grade 3 silicon nitride ceramic balls, custom-designed seals and precision dust covers, providing up to 500% better moisture protection while delivering ultra-low friction performance. The streamlined spacer tube design and lighter cups ensure quick installation and a 10% weight reduction compared to previous generations. Features:Use: RoadWeight: 195 gBottom bracket type: ITA Italian ThreadedCrank diameter: 24 mmCrank brand: Shimano

CeramicSpeed BB Alpha for BSA 30 mm Bottom Bracket BB Alpha is designed to outlast the frame it is fitted to, offering exceptional durability and long term performance. It features hardened stainless steel races hand built with grade 3 Silicon Nitride ceramic balls, combined with custom engineered seals and precision dust covers. This construction provides up to 500 percent better moisture protection while maintaining ultra low friction. The simplified spacer tube design and lighter cups allow quick installation and deliver a 10 percent weight saving compared with previous versions. Every CeramicSpeed BB Alpha model is supported by a lifetime warranty. CeramicSpeed Ultra Durable Construction T…