Car Service Station Equipment FACOM

This Expert by Facom 13 Piece Drain-Plug Bit Set contains the following: 6 x Hex bit sockets: 8, 10, 12, 13, 14 and 17mm.4 x Male drive bits: 8, 10, 10.5 and 13.1mm.1 x Female square bit.1 x XZN (Triple Square) bit.1 x Triangle bit.

U.51B Inside grip Tip Type Puller set in plastic storage case. Specifications • Weight: 3.4kg Features and Benefits • Capacity: Ø 32 to 70 mm. • Supplied with 15 tips. • Supplied in plastic case BP.109 with PL.710 tray

Steel wire brush. Specifications • Part Code: 270A.MA • Dimensions: 280 x 34 x 60 mm • Weight: 150 g

Facom U.232 sliding leg pullers are designed with versatility and safety in mind. Under pressure, the legs are set to overhand to avoid sliding. Specifications • Min. Reach: 45mm • Max. Reach: 210mm • Max. Depth: 145mm • Max. Holding Weight: 4Tonnes Features and Benefits • Conversion possible in inside or outside grip with the same leg • Anti-rotation system • Wrench tightened hexagonal lock-nut • Leg reverse rotation • Leg retainer - Spring-loaded pin at the end of the legs • The legs are designed to cantilever during pulling, blocking them in place and preventing them sliding along the beam

Facom U.232 sliding leg pullers are designed with versatility and safety in mind. Under pressure, the legs are set to overhand to avoid sliding. Specifications • Min. Reach: 65mm • Max. Reach: 270mm • Max. Depth: 190mm • Max. Holding Weight: 5 Tonnes Features and Benefits • Conversion possible in inside or outside grip with the same leg • Anti-rotation system • Wrench tightened hexagonal lock-nut • Leg reverse rotation • Leg retainer - Spring-loaded pin at the end of the legs • The legs are designed to cantilever during pulling, blocking them in place and preventing them sliding along the beam

Facom U.232 sliding leg pullers are designed with versatility and safety in mind. Under pressure, the legs are set to overhand to avoid sliding. Specifications • Min. Reach: 25mm • Max. Reach: 65mm • Max. Depth: 65mm • Max. Holding Weight: 1.5Tonnes Features and Benefits • Conversion possible in inside or outside grip with the same leg • Anti-rotation system • Wrench tightened hexagonal lock-nut • Leg reverse rotation • Leg retainer - Spring-loaded pin at the end of the legs • The legs are designed to cantilever during pulling, blocking them in place and preventing them sliding along the beam

Facom U.232 sliding leg pullers are designed with versatility and safety in mind. Under pressure, the legs are set to overhand to avoid sliding. Specifications • Min. Reach: 30mm • Max. Reach: 90mm • Max. Depth: 100mm • Max. Holding Weight: 3Tonnes Features and Benefits • Conversion possible in inside or outside grip with the same leg • Anti-rotation system • Wrench tightened hexagonal lock-nut • Leg reverse rotation • Leg retainer - Spring-loaded pin at the end of the legs • The legs are designed to cantilever during pulling, blocking them in place and preventing them sliding along the beam

Features and Benefits• Wood handle with suction cap at each end • 1 x L.245 mm with 19 and 22 mm ø suction caps• 1 x L.255 mm with 22 and 32 mm ø suction caps Specifications• Weight: 100g

Engineered with precision and durability in mind, this puller features three adjustable legs that securely grip onto the inner surface of the component for efficient extraction without causing damage. Crafted from high-quality materials and built to withstand heavy-duty use, the Facom U.310-230N Inside Puller delivers reliable performance even in the most demanding applications. Its ergonomic design ensures ease of operation, allowing users to achieve smooth and controlled pulling with minimal effort. With a maximum spread capacity of 230mm, this puller offers ample versatility to tackle a wide range of components across various industries. Features & Benefits • Versatile: takes 2 or 3 …

Features:- 1 model for ball joint Ø 24 mm- 1 model for ball joint Ø 28 mm- 1 model for ball joint Ø 34 mm- Supplied in a plastic case with instructionsWeight - 3 kg

Set of tools suitable for applications such as removing upholstery, stickers on bodywork and residues on alloy wheels.Includes:• 1x 20mm• 1x 23mm• 1x 25mm• 1x 38mm

The Facom 780B refractometer has four measurement scales: Adblue, Coolant, Battery Acid & Washer. It is supplied in a durable plastic storage case. Specifications • Dimensions: 700mm x 235mm x 70mm • Weight: 472g Features and Benefits • Four measurement scales for Adblue, Coolant, Battery Acid & Washer • Suited to Euro6 Diesel engines • Measures urea concentration of Adblue used • Provides reliable and precise information Contents • 780B Refractometer • Plastic Storage Case

Designed to meet the rise in vacuum filling cooling systems which dispense with bleed screws, the Facom 935A fills and bleeds air quickly, effectively and without wasting new coolant. Supplied in a rugged plastic case with 5 can adaptors.Features and Benefits• Safe to use - the 935A depressurises vacuum cooling systems for effective bleeding• Cost effective - fills and bleeds air quickly without wasting new coolantSpecifications• Weight: 1.96kg

Complete kit for detecting leaks in cooling systems.Features and Benefits• Includes adapters with quick couplers compatible with most European and Japanese cars.• Generic adapters allowing use on a broad range of vehicles and systems.• Supplied in a plastic case with instructionsSpecifications• Weight: 3.9kg

From Expert by Facom, this hydrometer is designed for checking the specific gravity of battery fluids. Readings are given in both gravity & percentage charge, with colour coaded floating discs indicating the state of charge.

These tips are specifically engineered to provide a secure grip on bearings, ensuring efficient and reliable extraction without causing damage to the components. Their versatility and reliability make them a must-have addition to any professional toolkit. Crafted with precision and durability in mind, these bearing puller tips are made from high-quality materials, offering exceptional strength and longevity. The cage grip design ensures a firm hold on bearings of various sizes, allowing for smooth and effortless removal. Features & Benefits • U.23D – Set of 2 tips Specifications • Diameter: 11mm • Tapping:M10 • Weight: 44g

Expansion Inserts No. 6 for Bearing Puller | Internal Thread M10 | Maximum Tensile Force 45 kN, RFID chip, set, 2 pieces.
Product strengths: tool with an RFID chip so that it can be found in the workshop. The Facom integrated chip guarantees you easy to find and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires adequate organisational equipment. Use with the reversible ratchets and drive squares 3/8 inch and 1/2 inch
Technical data: |d [mm]: 12.5|No. : 6|with internal thread: M10|T [kN]: 45|[g]: 45|[kg]: 0.045

These tips are specifically engineered to provide a secure grip on bearings, ensuring efficient and reliable extraction without causing damage to the components. Their versatility and reliability make them a must-have addition to any professional toolkit. Crafted with precision and durability in mind, these bearing puller tips are made from high-quality materials, offering exceptional strength and longevity. The cage grip design ensures a firm hold on bearings of various sizes, allowing for smooth and effortless removal. Features & Benefits • U.23D – Set of 2 tips Specifications • Diameter: 16mm • Tapping:M16 • Weight: 125g

These tips are specifically engineered to provide a secure grip on bearings, ensuring efficient and reliable extraction without causing damage to the components. Their versatility and reliability make them a must-have addition to any professional toolkit. Crafted with precision and durability in mind, these bearing puller tips are made from high-quality materials, offering exceptional strength and longevity. The cage grip design ensures a firm hold on bearings of various sizes, allowing for smooth and effortless removal. Features & Benefits • U.23D – Set of 2 tips Specifications • Diameter: 19mm • Tapping:M16 • Weight: 275g

These tips are specifically engineered to provide a secure grip on bearings, ensuring efficient and reliable extraction without causing damage to the components. Their versatility and reliability make them a must-have addition to any professional toolkit. Crafted with precision and durability in mind, these bearing puller tips are made from high-quality materials, offering exceptional strength and longevity. The cage grip design ensures a firm hold on bearings of various sizes, allowing for smooth and effortless removal. Features & Benefits • U.23D – Set of 2 tips Specifications • Diameter: 22mm • Tapping:M16 • Weight: 315g

Expansion inserts no. 10 for bearing puller, internal thread M16, tensile force max. 490 kN RFID chip set, 2-piece set.
Product thicknesses: tool with an RFID chip so that it can be found in the workshop. The chip integrated by Facom guarantees you easy finding and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires appropriate organisation equipment. Use with the reversible ratchets and drive square edges 3/8 inch and 1/2 inch
Technical data: |d [mm]: 25.0 | No. 10 | with internal thread: M16|T [kN]: 490 | [g]: 487 | [kg]: 0.490

Expansion Inserts No. 11 for Bearing Puller | Internal Thread M16 | Maximum Tensile Force 525 kN, RFID chip, set, 2 pieces.
Product strengths: tool with an RFID chip so that it can be found in the workshop. The Facom integrated chip guarantees you easy to find and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires adequate organisational equipment. Use with the reversible ratchets and drive squares 3/8 inch and 1/2 inch
Technical data: |d [mm]: 28.0|No. : 11|with internal thread: M16|T [kN]: 525|[g]: 525|[kg]: 0.525

With internal thread: M16
#12 Spreader Inserts for Bearing Puller
Internal thread M16
RFID chip set, 2 pieces
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

These tips are specifically engineered to provide a secure grip on bearings, ensuring efficient and reliable extraction without causing damage to the components. Their versatility and reliability make them a must-have addition to any professional toolkit. Crafted with precision and durability in mind, these bearing puller tips are made from high-quality materials, offering exceptional strength and longevity. The cage grip design ensures a firm hold on bearings of various sizes, allowing for smooth and effortless removal. Features & Benefits • U.23D – Set of 2 tips Specifications • Diameter: 5.5mm • Tapping: M6 • Weight: 26g