Car Service Station Equipment Laser Tools

The Laser Diesel Engine Compression Test Kit is a comprehensive tool kit for checking the condition of diesel engines on most cars and small boats fitted with diesel engines. It tests for compression loss resulting from worn valves and valve seats, valve guides, piston rings, cylinder head and gasket seals. Applications include: BMW, Citron, Dacia, Daihatsu, Fiat, Ford, Isuzu, Land Rover, Leyland DAF, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Seat, Toyota, Vauxhall, Volkswagen, Volvo.Dual scale pressure gauge: 0 - 1000psi (0-70 bar), with quick release connection system. Dummy injectors, seal and washer set, 90 degree elbow and clamp plate. M10, M12, M14 glow plug …

Suitable for Ford, Nissan, Renault, Rover, Vauxhall/Opel.1/4" Sq x 10mm Sq.Suitable for Ford, Nissan, Renault, Rover, Vauxhall.Manufactured from S45C steelDouble Square ended.Quality robust spanner.

This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines.For 1.0 12v X10XE and 1.2 16v X12XE enginesAgila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-BWith X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codesChain driven engines1993-2010

Correct tyre inflation gives more mpg and better braking, also prolongs tyre life.5-60 psi/0.5-4.2kgsMetal body.Angled head for access.Pocket clip.For cars and light commercials.

Pipe connector insertion tool for use on hard plastic fuel pipe connectors found in the Connect 37011 Pipe and Connector Kit An innovatively designed hand operated force tool combined with specifically machined adaptors to clamp the relevant fuel pipe and fit the connector in to the pipe.Developed to ease the fitting of the hard plastic fuel pipe connectors supplied in Connect pipe and connector kit, Part No. 37011. Applications fuel/air and vacuum pipes fitted with snap type connectors. Suitable for on vehicle use. Hard pipe sizes covered ID 8mm x OD 10mm, ID 10mm x OD 12mm, ID6mm x OD 8mm.Always lubricate the connector with petroleum jelly or similar to assist assembly.

Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access.4.75mm (3/16") with ratchet handle.Automatic self adjusting for faster cutting. Fast and accurate operation, ideal for under vehicle use.Extra leverage due to handle length over standard cutter. To further increase leverage use the 1/4 drive square in the end of the handle.Spare cutting wheel available - Laser Part No. 61279.

Pipe wrench type design with quick fit spring loaded jaw. Long 18" (457mm) handle for greater leverage with 10mm - 35mm jaw adjustment range. Serrated jaws help prevent slippage and damage to track rods. Spring loaded drop forged jaw for strength. Rubber grip handle.

This kit provides the camshaft timing and camshaft sprocket locking tools required for the Volvo 1.5L and 2.0L petrol engines with the engine codes listedApplications include: Volvo S60 (2012 - 2018), S80 (2013 - 2016), S90 (from 2016), V40 (2014 - 2019), V60 (2013 - 2018), V70 (2013 - 2016), V90 (from 2016), XC40 (from 2017), XC60 (from 2013), XC70 (2013 - 2016), XC90 (from 2014).Engine code applications include: 1.5L B4154T; 2.0L B4204T petrol engines including PHEV versions.Used to lock the camshafts in their timed position and hold the loosened sprockets while removing and replacing the cam beltEquivalent to OEM 9997490, 9997497.Use in conjunction with Laser Tools crankshaft holding tools,…

Double sided stretch belt tool suitable for safely removing and installing stretchy type drive/alternator belts and accessory belts without causing damage to either the belt or the pulley. Each side of the tool features a magnet to keep it in position on the pulley whilst getting it into place. A hand ratchet can then be used to rotate the crankshaft or accessory pulley, gently easing the belt over the edge of the pulley.Removal and fitting tool, designed for use with most stretch belts.Reversible (guides belt both on and off the pulley).Fitted with a magnet for ease of use.One-piece construction with zinc plated finish for durability.

Designed to allow the engine timing to be set and checked on the Audi & Volkswagen 3.0 TDI diesel engines listed. The 7588 is a 7 piece kit which provides all the timing tools required for chain removal, timing checking and setting. Applications include: Audi A4, A5, A6, A7, A8, Q5, Q7 & VW Amorak; all from 2014 onwards.3.0L TDI Engine codes: CRTC, CRTD, CRTE, CRTF, CSWB, CVZA, CZVA, CZVB, CZVC, CZVD, CZVE, CZVF, CZZA, CZZB, DCPC, DDVC, DDXA, DDXB, DDXC. Equivalent to OEM tools: T10060A, T40310, T40237, T40316, T40245, 3359, T40049. For sprocket and pulley holding tools, see Laser Part No. 7279.

This engine timing kit offers the tools required for setting and adjusting engine timing and removing/fitting the timing chain on the 1.3 CDTi Diesel engines from Vauxhall/Opel. Applications include Corsa E 1.3 Diesel from 2015 with Engine codes: LKU B13DTE, LKU B13DTR, LKV B13DTC.Full and comprehensive kit for setting and adjusting engine timing and removing/fitting the timing chain. Equivalent to OEM: KM-662-C, EN-50515, EN-51500, EN-46775, KM-955-1, EN-46785. For camshaft removal additional tooling required see Laser 7067.

Locks the fuel pump sprocket and chain in a fixed position while the pump is removed and replaced. Applications: JLR 2.0 Ingenium diesel engines (from 2015), fitted to Land Rover, Discovery Sport, Range Rover & Evoque.Equivalent to OEM JLR-303-1627. Engine code include AJ-200D, 204DT, AJ-200D, AJ200, 204DTD. Designed for use with Laser Timing Tool Kit, Part No. 7430.

Lever action pump specifically for use with AdBlue. Fits 200L drums or barrels, or 1000L IBC tank. Designed for use with AdBlue, but also suitable for water, lubricants, antifreeze, windshield washer fluid or mild detergents.Smooth lever action pump flow rate of 500cc's per stroke / 20L per minute. Suction pipes length range: 350 - 980mm. 1.6m flexible delivery hose also included. To fit larger 205 or 210 litre containers, an adaptor is available seperately - see Laser Part Nos. 60532 or 7621.

A set of 3 oil filter wrenches with flute profile and 1/2"D, specifically for a wide range of Jaguar and Land Rover vehicles. 74mm x 14 flutes applications include: Jaguar XKR (2007), XJ6(2008), XK(2008), Daimler (2008), Sovereign (2008 - 2009), X-Type (2008 - 2010), XF (2010 - 2013), XJ (2010 - 2013).75mm x 30 flutes applications include: XKR (2010 - 2012), F-Type (from 2014), F-Type Coupe (2014), XF (2014 - 2016), XJ (from 2014), F-Pace (from 2017), XE (from 2017). 89mm x 15 flutes applications include: Range Rover (from 1994); Range Rover Sport, Velar, Evoque, Discovery Sport (from 2008); Discovery 2 (1998 - 03); Discovery 3 (2004 - 2008); Discovery 4 (2009 - 2015); Discovery 5 (from 2016).…

Developed for the latest 2.0L diesel engine from JLR. The kit contains all the essential components required to lock the new JLR 2.0L Ingenium Diesel Engines in their timed position so that the engine timing chain can be safely removed and replaced and the engine timing checked. Vehicle applications include: Jaguar E-Pace (from 2017), F-Pace (from 2016), XE (from 2015), XF (from 2015). Land Rover Discovery (from 2017), Discovery Sport (2015 - 2019), Range Rover Evoque (2015 - 2019), Range Rover Sport (2016 - 2018) & Range Rover Velar (from 2017).For locking the engine into the timed position so the engine timing chain can be removed/replaced and the engine timing checked. Should be used with …

A standard three arm filter wrench with adaptor for 3/8" or 1/2" drive Three arm.Adaptor to convert from 1/2"D to 3/8"D.Adjustable.Suitable for old style filters.Fits filter sizes 65-120mm

This coil spring compressor uses twin prongs and works at a pressure up to 1100kg. Care should be taken to increase pressure equally on both sides.Twin prongs for better grip.Maximum load 1100kgs.Maximum extension 235mm.Always follow safety precautions.Wear eye protection.

Oil filter wrench 86mm x 16 flutes for BMW and Volvo S40 and S80.Equivalent to OEM 11 9 24088mm x 16 flutes (See also 4234) (88mm point to point/86mm flat to flat)For Eco filters on Volvo S40 & S80 and BMW N40, N42, N45, N46, N523/8" drive0

For all flat band and ring hose clamps. 1 x cross slotted jaw type and 1 x wide flat band jaw type. Ratchet mechanism for ease of installation and removal.2 pieces.For all flat band and ring hose clamps.1 x cross slotted jaw type.1 x wide flat band jaw type.Ratchet mechanism for ease of installation and removal.

This flaring tool kit can be easily used with the pipe in position on the vehicle etc. and can be used on Copper, Brass and Aluminium tubing. Produces male, female and double flares on 5mm to 16mm diameter pipes/tubes. Spare die bar available - Part No. 0360.Dimensions: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"Produces male and female double flaresFlares pipes from 5mm to 16mm diameterSpare die bar available - Part No. 0360Use on Copper, Brass and Aluminium tubing

Assists the removal of small bearings for numerous applications including alternators, generators, domestic appliances, power tools and pumps. Reach 73mm, capacity 1 tonne, spread 19-45mm.Assists the removal of small bearings for numerous applications.Applications include: alternators, generators, domestic appliances, power tools and pumps.Capacity 1 tonne.Spread 19-45mm.Reach 73mm. (Spare leg available - Part No. 0451).

Tension lever for Volkswagen | Audi | Skoda vehicles.Tension lever for Volkswagen | Audi | Skoda vehiclesSoft grip handle for easy, comfortable useAlternative size also available - Part No. 3107OEM code 3387/T1002018mm pin centres/3mm pins

Timing tool set for Renault 16v engines. Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin for: Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines.Includes camshaft setting tool, tensioning tool for auxiliary drive belt and crankshaft TDC timing pin.Laguna | Safrane 2.0 | 2.5 16v 1996-2001 engines.Engine codes: N7U, N7Q.OEM Ref MOT 1340 | 1348 | 1337.Supplied in storage case.