Car Service Station Equipment Powertec

A 0.5mm replacement wire wheel for the Power-Tec Surface Prep Pro, used to strip away paint, stripes, under seal and rust to prepare bodywork.

A 0.7mm replacement wire wheel for the Power-Tec Surface Prep Pro, used to strip away paint, stripes, under seal and rust to prepare bodywork.

A replacement 100mm pull ring, suitable for use most pull clamps used in the vehicle bodywork repair trade.

A right angle clamp with 6 ton pulling capacity, ideal for straight and right angle pulls and for use with body pulling equipment.

With 28mm, 28.5mm and 30.5mm covers, this useful set is used to cover and protect door locks while working on or spraying door panels.

A 150mm combination sanding block with 6 & 9 holes. Ideal for a wide range of smaller scale sanding applications. With dust extraction hose fitting.

A 150mm curved sanding block, allows for detailed sanding on a wide range of curved body panels and other surfaces.

A 150mm flexible sanding block with single vertical slit, allows for detailed sanding on a wide range of curved body panels and other surfaces.

A 230mm curved sanding block, allows for detailed sanding on a wide range of curved body panels and other surfaces.

2.5 metres of 10mm thick, grade 80 body chain manufactured from heat treated steel. Tough, durable and shatter resistant, this chain is ideal for various applications.

This handy Midget Clamp from Power-Tec is has a 35mm wide jaw and is small enough to be used in hard to reach, tight areas, yet it still boasts a 4 ton pull capacity, making it ideal for various automotive damage repair jobs.

A 70mm x 390mm large faced sanding block, ideal for larger scale automotive sanding applications. With hose connector allowing for easy dust extraction while in use.

A right angle clamp for use with body pulling equipment.

Tough, durable and useful 45mm Pull Clamp from Power-Tec, great for various pulling applications. With 5 ton pull capacity and pull yoke.

A 4 inch replacement stripping wheel for the Power-Tec Surface Prep Pro, used to strip away paint, stripes, under seal and rust to prepare bodywork.

A 70mm x 192mm 'dust free' Sanding block with 8 holes for dust extraction. Ideal for general sanding applications.

A handy eight piece disc sanding set ideal for automotive sanding applications involving both flat and contoured surfaces. All are lightweight, ergonomic and a joy to use.

A 9 piece kit containing an array of tools used to open doors and hatches on vehicles in emergency situations. Includes strips for windows and wire tools that allow the user to skillfully open doors and hatches on European and Japanese cars.

Lightweight bit hook manufactured to be used with the Power-Tec AiroPower system.

A durable aluminium and steel plate body file holder and file combination, that can be bent to convex and concave angles, or left flat, perfect for use on a wide range of body panels, curved or flat.

This simple to use, time & money saving tool is used to restore the natural contours of body panels by raising or lowering the defect as close as possible to the original surface, minimising the amount of removal during panel preparation.

With 125mm x 65mm reach, 6 ton pulling capacity and a slim clamp leg for working over various obstacles that can be faced during automotive bodywork pulling applications, the CamLok clamp from Power-Tec is ideal for pulling work on vehicle chassis and other areas.

Quick and easy to fit adaptor, designed to convert the Power-Tec flexible sanding file into a large curved file for contour sanding of large areas.

A large curved sanding file, made to be used with the Power-Tec 390mm sanding block. Ideal for quick and effective sanding of large contoured areas.