Inexpensive boilers

This Vaillant stainless steel facade/ plume fastening clamp is suitable for use with the Vaillant 80/125 facade/ plume system and is recommend that one is used every meter.50mm to 90mm adjustable.

The Worcester Greenstar 4000 Remote PRV Kit enables the PRV to be fitted outside of the boiler, improving flexibility of boiler siting. Perfect for central locations such as airing cupboard installations.Compatible only with the Worcester Greenstar 4000 and Compact boiler ranges.

This Vaillant 80/125 flue extension can be used between flue elbows, vertical adaptor and vertical terminal to extend the length of the flue system by up to 470mm. Its suitable for use in conjunction with Vaillant EcoTEC commercial boiler models.

The Vaillant 80/125 sliding sleeve is ideal for carrying out flue run repairs or for joining a flue together in awkward-to-reach places. Compatible with Vaillant EcoTEC commercial boiler models.

The Vokera outdoor weather compensation sensor can be connected to certain Vokera appliances to adjust the outlet flow temperature relative to the outside temperature. This is called thermo-regulation.By adjusting certain parameters on the boiler or dedicated control, a unique thermoregulation curve can be set that allows the boiler to regulate the output flow temperature to suit the local climatic conditions.The Vokera Controls Interface will need to be used when installing with a Vokera Easi-Heat Plus combi boiler, the controls interface is sold separately.Compatible with the following Vokera Boilers:Easi-Heat Plus Combi BoilerCompact A Combi BoilerVision C Combi BoilerUnica i Combi BoilerLinea …

These 100mm adjustable flue support clips from Vaillant are suitable for use on any 100mm flue system and is recommend that one clip is used every meter.

The Vaillant EcoFIT Pure rear piping spacing frame can be used to install a Vaillant EcoFIT Pure boiler between kitchen units. By creating some space between the boiler and the wall behind, it allows the pipework to be run down the rear of the boiler from above rather than through the worktop.

The Vaillant stainless steel 80/125 500mm facade/ plume extension is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

This Vaillant stainless steel facade/ plume fastening clamp extension is suitable for use with the Vaillant stainless steel facade/ plume fastening clamp.90 to 280mm adjustable.

This stand off kit enables you to wall mount your boiler whilst creating a space at the rear to run pipework from above down behind the boiler.Only compatible with the Baxi 200 / 400 series 'Combi 2' boilers.

The sensoROOM pure from Vaillant is available as a wired room thermostat and uses Vaillant’s eBUS communication protocol. Therefore, when installed with a Vaillant boiler, the control will take full advantage of enhanced load compensation to modulate and further improve the overall efficiency of the Vaillant heating system. This also provides easy compliance with boiler plus legislation.

This flat roof flashing from Vokera is used to create a tight seal around a vertical flue installed through a flat tiled roof.

This non-condensing flue extension is suitable for use only with Vokera standard efficiency (SE) boilers. It can be used between flue elbows and a vertical terminal to extend the length of the standard horizontal flue pipe by up to 750mm providing increased flexibility during installation.(For use with the Vokera Easi-Flo Plus Water Heater range.)

The 90 non-condensing flue bend is suitable only for Vokera standard efficiency (SE) boiler range. When used in conjunction with Vokera non-condensing boiler flue accessories as part of a horizontal or vertical flue installation, it can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run.(For use with the Vokera Easi-Flo Plus Water Heater range.)

For use in conjunction with Vaillant 80/125 flue accessories as part of a horizontal or vertical flue installation, this 87º flue bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run for a Vaillant EcoTEC commercial boiler.

The Baxi Power Adapter & Gateway for the uSense 2 Room Thermostat is an essential component for connecting and enabling remote control of your heating system via the uSense app. The power adapter provides the necessary electrical supply to the thermostat, while the gateway acts as a communication bridge between the thermostat and the app, allowing you to control your heating system from your smartphone or tablet. This setup enables users to manage temperature settings and schedules remotely, offering convenience and energy efficiency by adjusting heating preferences from anywhere.

This BeSMART Alpha DGT wireless room thermostat from Vokera is a non-programmable wireless room thermostat allowing simple control over the central heating temperature. The control will switch the boiler on/off in order to produce the set temperature.This ‘on / off’ room thermostat can be used to adjust the set room temperature.It’s ideal for the Vision C boiler, as the user can conveniently adjust their heating temperature without interfering with any programmed heating timings that have been set on the Vision C boiler’s built-in seven-day digital clock. Also compatible with all other Vokèra boilers where a simple room thermostat is required.The Vokera Controls Interface will need to be use…

The Vaillant stainless steel 80/125 1 metre facade/ plume extension is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

This Vaillant stainless steel facade/ plume wall support bracket is suitable for use with the Vaillant 80/125 facade/ plume system and is used low down the plume run to give a solid support to the wall. It would then be recommended to use the Vaillant Facade/ Plume fastening clamp every meter there after.50mm to 300mm adjustable..

When used between flue elbows, vertical adaptor and vertical terminal, this Vaillant 80/125 flue extension provides more flexibility during installation by enabling you to extend the length of the flue system by up to 970mm. Compatible with Vaillant EcoTEC commercial boiler models.