Server Components Digitus

- Ideally suited for components that cannot be installed 254 mm (10")
- Slim design that only takes up 1 height unit
- Quick and easy assembly or disassembly

The 10" shelves from DIGITUS consist of a sturdy perforated metal sheet and can be installed quickly and easily on the front 10" profiles. They are supplied complete with mounting material and are therefore ready for immediate use. Use the DIGITUS 10" shelves to store components that are not mounted directly in your 10" enclosure.

Digitus Blank cover for 483 mm (19") cabinets - Modular blanking plate- To improve air circulation in the network and server enclosure- Easy installation in the 483 mm (19") profile- Practical option for covering otherwise unused height units in the 483 mm (19") profileThe blind covers are suitable for all 483 mm (19") profile rails in your network or server enclosure. They are used to close off unused areas in the 483 mm (19") level. This has a positive effect on aesthetics and improves air circulation.

Digitus Cable brush strip for 483 mm (19") cabinets - Enables orderly cable routing within the 483 mm (19") network or server enclosure- 27x423 mm opening with brushes to protect the cables from damage- Slim design that only takes up 1 height unit- Ready for immediate use: Fastening material is supplied (cage nuts. screws. washers)The 1U cable brush strips are attached to the 483 mm (19") profile rails. Integrated brushes protect the routed cables from damage. They are therefore particularly easy to lay in the rear or side of the enclosure to optimize cable management in your network or server enclosure.

- Enables orderly cable routing within the 483 mm (19") network or server enclosure
- 27x423 mm opening with brushes to protect the cables from damage
- Slim design that only takes up 1 height unit
- Ready for immediate use: Fastening material is supplied (cage nuts screws washers)

The 1U cable brush strips are attached to the 483 mm (19") profile rails. Integrated brushes protect the routed cables from damage. They are therefore particularly easy to lay in the rear or side of the enclosure to optimize cable management in your network or server enclosure.

- Easy installation
- Optimized cable management possibilities due to cable rings and additional openings with brushes

The Cable Management Panel is getting fixed on the 483 mm (19) profile rails. Four cable guiding rings and three cable entries with brush allow an easy horizontal array of patch cords. It guarantees an optimized cable management in your 483 mm (19) network- or server rack.

- Easy installationThe Cable Management Panel is getting fixed on the 483 mm (19“) profile rails. A detachable rear plate makes to access to cables easier. An optimized cable management in your 483 mm (19”) network- or server cabinet is guaranteed. Digitus Cable Management Panel with detachable cover for 483 mm (19“) cabinets. 1U

Digitus Cable Management Panel with Steel Rings for 482.6 mm (19") Cabinets. 1U - 5x steel brackets for clear cable management- Extra durable steel brackets are suitable for larger cable quantities- Steel brackets can be dismantled- Panel made from sturdy steel sheetClear. neat cable management is one of the most important aspects for an efficient cabinet configuration. The DIGITUS® cable management panel provides 5 stable steel brackets for an efficient use. even when handling larger cable quantities. Coloring is done by means of powder coating in the colors light gray (RAL 7035) or jet black (RAL 9005). The steel brackets can be dismantled on request in order to flexibly adjust the panel t…

- Enables effective cable routing at the side of the network enclosure- Easy attachment of cables to integrated hammerhead profiles using cable ties or Velcro tape- The rail can be mounted at several points on the frame of the DIGITUS® network enclosure- Ready for immediate use - delivery includes mounting materialThe cable support rails are installed horizontally in the enclosure depth of the 483 mm (19") network enclosure. As they are attached to the perforated frame profile. they provide plenty of scope for organized cable management. Individual cables or entire cable harnesses can be easily attached to the hammerhead profiles using cable ties or Velcro tape. The rails are suitable for all D…

EU Plug.Specifications:- Rack Capacity:10u - Type:Wall Mount - Maximum Weight Capacity:30 Kg - Material:Steel - Frame Type:Closed - Front Door Structure:Glass - Cooling Type:Passive - IP Code (International Protection):Ip20 Weight and Dimensions:- Size (Imperial):25.4 Cm (10´´) - Width:350 mm - Depth:350 mm - Height:550 mm - Weight:10.3 Kg

Digitus Computer housing with glass door. rolling. lockable. with ventilation slits Mobile housing. lockable. rolling. with ventilation slits and glass window.- The housing is mobile thanks to robust casters with locking brakes- air ventilation slots for active- and passive ventilation and exhaustion- Robust steel construction for optimal protection of the PC housing- Lockable front door and lockable service opening on the back- Cable feedthrough in the back of the housing base and in the roof sealed with foam rubber- Offers enough space for all standard PC housings- Front door with glass window for viewing of the PC function display at any time- Offers sufficient passive ventilation through …

Digitus Computer housing with in-built filter fan and levelling feet Computer housing with active ventilation including filter system. and levelling feet- Active ventilation with filter system (2.3 m³ air flow per minute)- Active fan can be switched off separately from the outside- Lockable front door and lockable service opening on the back- Cable feedthrough in the back of the housing base and in the roof sealed with foam rubber- Offers enough space for all standard PC housings- Front door with glass window for viewing of the PC function display at any time- Protection type: IP54The computer housing from DIGITUS® features robust construction made of 1.5 mm thick steel sheet. which leaves no…

The DIGITUS® 483 mm (19") accessories have been developed to meet the high demands of IT infrastructure. It is manufactured according to German quality standards.- Extends the height and thus the storage space for excess cable lengths- Simple cable management thanks to cable feed-through with brush strip- Simplified logistics: delivered unassembledWith the DIGITUS® plinths you can increase the ground clearance of your network or server enclosure by 100 mm. If required. up to two plinths can be mounted on top of each other to achieve a height of 200 mm. The interior can be used to store excess cable lengths and for cable management. Delivery is unassembled to optimize logistics. Digitus DN-19 PL…

Digitus Equipotential bonding rails. 770 mm - 2x 770 mm copper rail incl. connecting earthing cable- 24 connection points per copper railThe equipotential bonding rails can be easily mounted on the profile rails of your rack to connect the necessary components. Two versions are available: The short version (220 mm long) has a total of six connection points. The second version is a set consisting of two 770 mm long rails with 24 connection points each (48 in total) with an additional short earthing cable to connect the two rails.

- Extractable. with handle bar- For fixing at the four 483 mm (19") mounting profile railsThe extendible Shelves are easy to install at the four 483 mm (19") profile rails of your 483 mm (19") cabinets. Due to the sturdy. perforated sheet steel with a high load capacity. they are the optimal surface for your network components. An attached handle can be installed to faciliate the extension of the shelf. Available in standard color grey (RAL 7035) and black (RAL 9005). Digitus Extendible Shelf for 483 mm (19") Cabinets

Digitus Extendible Shelf for 483 mm (19") Cabinets - Extractable. with handle bar- For fixing at the four 483 mm (19") mounting profile railsThe extendible Shelves are easy to install at the four 483 mm (19") profile rails of your 483 mm (19") cabinets. Due to the sturdy. perforated sheet steel with a high load capacity. they are the optimal surface for your network components. An attached handle can be installed to faciliate the extension of the shelf. Available in standard color grey (RAL 7035) and black (RAL 9005).

Due to its compact construction it is perfectly suitable also for 483 mm (19”) wall mounting cabinets with a depth from 450 mm.- extendible. with handle- Fixed installation only on the front 483 mm (19") profile rails - due to this it is perfectly suitable for double sectioned wall mounting cabinetsThe shelf for fixed mounting is easy to install on the front 483 mm (19“) profile rails of your 483 mm (19“) network- or server cabinet. Due to its compact construction it is perfectly suitable also for 483 mm (19”) wall mounting cabinets with a depth from 450 mm. The shelf is extendible via handle which makes the access easier. Due to its stable. perforated steel sheet with a load capacity of 30 kg…

The ideal solution for storing and charging your portable devices in a standard network or server cabinet.- 14 spaces with a width of 28 mm each- Sturdy steel brackets hold devices in place- Cable feedthrough and Velcro strap on the rear- Excess cable storage on the underside (20x410x140 mm)With this special shelf. you can use any standard 482.6 mm (19") cabinet to store your portable devices such as tablets. notebooks or smartphones. Sturdy steel brackets provide space for up to 14 devices. Cable feedthroughs are located on the front to connect the devices optimally with cables. for instance when charging from a power source. A storage space for excess cable is provided on the bottom. For user-friendly …

Digitus Fan unit for variable 483 mm (19") installation The DIGITUS® 483 mm (19") accessories have been developed for the high demands of IT infrastructure and are manufactured to German quality standards.- Variable installation in the 483 mm (19") level- The waste heat from the built-in components is actively dissipated via the fan unit- Two built-in fans- Includes adjustable thermostat and ON/OFF switchAlso known colloquially as slide-in fans. the fan units can be mounted variably in the 19" grid of any network or server rack instead of under the roof. The scope of delivery includes mounting brackets for easy attachment in the 19" profile. Equipped with an ON/OFF switch and a shelf-mounted t…

FO splice box. 1U. equipped. 24x LC DX. OM4.incl. splice cassette. colored pigtails. couplers Digitus Fiber Optic Sliding Splice Box. 1U. Equipped. LC. OM4

Future-oriented standards and high-end quality for your network.- Quick lock systemThe DIGITUS® front panel was designed for the basic housing DN-96200-QL. You can easily install the front panel with the fixing material included in the packing of the basic housing. The new quick lock system makes the operation easier and faster than ever before. Digitus Fiber Optic Splice Box Front Panel. quick lock. 12x SC DX. 1U

Future-oriented standards and high-end quality for your network.- Quick lock systemThe DIGITUS® front panel was designed for the basic housing DN-96200-QL. You can easily install the front panel with the fixing material included in the packing of the basic housing. The new quick lock system makes the operation easier and faster than ever before. Digitus Fiber Optic Splice Box Front Panel. quick lock. 12x LC DX. SC SX. E2000 SX

Future-oriented standards and high-end quality for your network.- Quick lock systemThe DIGITUS® front panel was designed for the basic housing DN-96200-QL. You can easily install the front panel with the fixing material included in the packing of the basic housing. The new quick lock system makes the operation easier and faster than ever before. Digitus Fiber Optic Splice Box Front Panel. quick lock. 6x SC SX. LC DX

Digitus Industrial Network Cabinet. Indoor. IP55 - Safety class IP55 against dust & water ingress acc. to IEC EN60529- IK10 mechanical impact resistance acc. to IEC EN62262- 4 point locking system on front- & rear door- incl. already mounted plinthThe free-standing industrial network cabinets are specially adapted according to protection type IP55 for the requirements of harsh environments. The floor structure can be opened in a modular design thanks to its galvanized. bolted panels. In addition. it is equipped with a sliding cable inlet with foam rubber seal as well as PG cable glands. A plinth mounted under the cabinet (100 mm) provides extra storage room for excess cable lengths. Two pairs …

Digitus Keyboard Drawer & Document Storage for 483 mm (19") Cabinets - lockable and equipable with handleThe Keyboard Drawer & Document Storage suit to all 483 mm (19”) profile rails of your network- or server cabinets. Available in various height units. they offer the perfect solution to keep your documents organized.