Server Components Startech.com

Use this 1U server rack cable-management panel with pass-thru routing holes to organize network server and KVM cabling in your rack

This server rack cable-management panel keeps your rack cables neatly bundled and guided for tidier rack space. The 1U cable organizer features a combination of D-ring hooks and pass-through holes that enable you to run cables to and from your equipment through the panel and into the hooks.

Easily organize your cables for a more manageable server rack

The rack-cable management panel makes it easier to organize cables from the front or back of your server rack. It features five conveniently placed D-ring hooks that you can use to hold and guide cable bundles …

The CMBRUSH1U Brush Strip Cable Management Panel mounts to a standard 19" 2 or 4-post rack to organize cables while keeping dust and dirt out of the rack. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

Constructed of high-quality steel with high-density nylon bristles the 1U brush plate creates a clean looking point of entry and offers cable separation for simple cable organization. The brush panel also promotes proper airflow through the rack by closing off open spaces between equipment.

For easy installation this cable organizer comes complete with 2 sets of rack screws (10/32 and 12/24).…

Free Standing Network Rack | EIA-310 | Weight Cap. 66 lbs. | Lifetime Warranty

Thisopen frame desktop rackprovides 4U of storage space for mounting smaller A/V and IT equipment.

Save money with a low-cost mounting solution

With this2 postdata rack you can mount equipment at a fraction of the cost of conventional racks. Thefloor standingrackis engineered to meet EIA-310 rack-mount standards and is constructed of solid steel ensuring a sturdy and safe mounting solution for your mission-critical equipment.

Improve efficiency and accessibility in your office or server room

The4u desktop rackfeatures an open frame free standing design that saves space with a small footprint. It gives …

Mount server telecom and A/V equipment with these high quality nuts

This 50 Pack of M5 Cage Nuts for Server Racks and Cabinets is convenient to have on hand for installing server network AV and other rackmount equipment securely into your storage cabinet or server rack. Each pack includes a cage nut installation tool to ensure a fast and simple installation of each cage nut. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

The pack includes 50 Nuts providing enough mounting hardware to setup any rack you might be working on.

Backed by a StarTech.com 2-year warranty .

The StarTech.com Advantage…

Organize cables reduce cable and connector strain and improve airflow in racks and cabinets

Organize network and power cables on a 19" rack or cabinet with this 1U horizontal cable lacing bar with variable depth. Organize cables and reduce cable and connector strain by mounting this lacing bar between rack-mounted patch panels servers and NAS devices. Tether cables to the cable management bar using cable ties or hook-and-loop fasteners to enhance the airflow to mission-critical equipment.

Enhance Cable Management

Ensure even distribution of cable weight throughout the rack to reduce stress on cables connectors and equipment ports. The improved cable organization facilitates a clear …

Mount your server or networking equipment using this 12U wall mount rack

This open-frame wall-mount server rack provides 12Uof storage allowing you to save space and stay organized. The equipment rack can hold up to 198 lb. (90 kg).

Easy hassle-free installation

The network rack is 12 in. (30.4 cm) deep so its perfect for smaller spaces. Its easy to assemble and features mounting holes that are spaced 16 in. apart making it suitable for mounting on almost any wall based on commonwall-frame stud spacing. The wall-mount rack comes in a flat-pack which makes it easy to transport and reduces shipping costs.

Free up space

You can mount the open-frame rack where space is limited such …

Mount equipment that is up to 13.75 inches deep such as patch panels or network switches to your wall

This wall-mount bracket provides 12U of space for mounting shallow rack-mount equipment that's 13.75 in. (34.93 cm) deep or less to the wall such as patch panels or network switches.

Improve efficiency and accessibility in your workspace

The 12U rack optimizes your working space by efficiently mounting your shallow equipment on your wall instead of taking up desk space or other usable surface areas. It's the perfect solution for your space-limited SoHo (small office home office) environment or server room because it doesn't take up any floor space.

Ensure a secure and hassle-free …

Network Rack | 19 Wide | 12 to 20 Depth | Weight Cap. 198 lbs | Open Frame

This open frame wallmount server rack provides 15U of storage helping you to save space and stay organized. The equipment rack features an adjustable depth and can hold a total of up to 198 lb (90 kg).

Accommodate Larger Devices

The open frame rack adjusts from 12 to 20 inches (30.4 to 50.8 cm) to accommodate larger data network and telecommunication devices. The above-average depth also gives you the option to mount shelves and other accessories.

Free up Floor Space

When space is limited you can wall-mount the open-frame rack in a server room office or above a doorway to expand your workspace and ensure …

Wall Mount A Patch Panel Or Network Switch While Providing Hinged Access To The Back Of The DeviceThe Wallmounth1 1U 19In Hinged Wall Mounting Bracket For Patch Panels Is 4In Deep And Sturdily Designed To Provide A Dependable Solution For Mounting A Patch Panel Or Other Slim 19In Networking Equipment To A Wall.The Patch Panel Wall Mount Features A Hinged Design For Easy Access To Configuration Buttons Ports And Cables. The Wall Mounting Holes Are Spaced 16 In. Apart Making It Suitable For Mounting On Almost Any Wall Based On Common Wall-Frame Stud Spacing.Backed By A Startech.Com 2-Year Warranty.The Startech.Com Advantage- Hinged Side Panel Allows For Easy Access To The Rear Of The Mounted Equipment …

The CABLMANAGER2 1U Cable Management Panel mounts to a standard 19 2 or 4-post rack to help you organize network server or KVM cabling using D-Ring hooks. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

Constructed of high-quality steel the cable organizer panel offers 5 removable ABS plastic D-Ring hooks spaced 4in (105mm) apart for routing cables through your server rack and reducing cable strain. As an added benefit the hook on either end of the panel can be turned 90 to accommodate horizontal or vertical rack cabling as needed.

Adding a cable manager in between equipment also functions to …

Use these blank rack panels to fill empty U-space in your rack to improve appearance and promote passive cooling

This 10-pack of 1U blanking panels can help you to improve the appearance and airflow of your EIA-310 compliant 19 in. server rack.

Professional look

These blank rack panels create a clean and professional look by covering empty rack spaces and visible cables for a more organized server room.

Tool-less installation

For fast and easy installation these rack blanks feature a tool-less design that latches onto a standard 19 in. server rack (with square mounting holes) saving you time and hassle.

Improve airflow

The filler panels feature a solid design that helps …

The SV431RACK 1U rack mount brackets let you mount your SV431 / SV431D KVM switch into a rack or cabinet.

Designed for simple installation and maximum server rack space-efficiency the rack brackets include a cable support bracket that reduces stress on KVM cables and switch connectors.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage
- Saves space by rackmounting equipment

Add a sturdy fixed shelf into almost any server rack or cabinet

The SHELF-1U-12-FIXED-S lets you add a 1U 12 inches (30.5 cm) deep shelf to any EIA-310 compliant 19-inch rack or cabinet.

Quality construction

The fixed-rack shelf can hold up to 55 lbs (25 kg) of equipment and is constructed using 2.0 mm SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.

Two installation options

You can install the 1U rack shelf using one of two different orientations for mounting. The standard with the lip facing downwards or inversed with the lip facing upwards …

Add a sturdy fixed shelf into almost any server rack or cabinet

The SHELF-1U-20-FIXED-S lets you add a 1U 20 inches (50.8 cm) deep shelf to any EIA-310 compliant 19-inch rack or cabinet.

Quality construction

The fixed-rack shelf can hold up to 55 lbs (25 kg) of equipment and is constructed using 2.0 mm SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.

Two installation options

You can install the 1U rack shelf using one of two different orientations for mounting. The standard with the lip facing downwards or inversed with the lip facing upwards …

Add a sturdy 1U server rack shelf into almost any rack or cabinet

This 1U rack shelf lets you add 10 in. of flat storage space to any EIA-310 compliantserver rack or cabinet. The shelf is vented to improve air flow and help lower temperatures in your rack.

Ensure your equipment is secure

The durable fixed-rack shelf can hold up to 20 kg (44 lbs.) of equipment and is constructed using SPCC commercial-grade cold-rolled steel.

Make the most of your available space

The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space. Its perfect for your SOHO (small office home office) environment …

Add a sturdy 1U server rack shelf into almost any rack or cabinet

The SHELF-1U-12-FIXED-V lets you add 1U 12 inches (30.5 cm) deep shelf to any EIA-310 compliant 19-inch rack or cabinet. The shelf is vented to improve airflow and help lower temperatures in your rack.

Quality construction

The fixed-rack shelf can hold up to 55 lbs (25 kg) of equipment and is constructed using 2.0 mm SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.

Maximize ventilation

The vented shelf plate improves the airflow helping to dissipate heat away from your equipment …

Add a sturdy 1U server rack shelf into almost any rack or cabinet

The SHELF-1U-20-FIXED-V lets you add 1U 20 inches (50.8 cm) deep shelf to any EIA-310 compliant 19-inch rack or cabinet. The shelf is vented to improve airflow and help lower temperatures in your rack.

Quality construction

The fixed-rack shelf can hold up to 55 lbs (25 kg) of equipment and is constructed using 2.0 mm SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment.

Maximize ventilation

The vented shelf plate improves the airflow helping to dissipate heat away from your equipment …

The CMHOOK1U Vertical Cable Management D-ring lets you add a 1U metal cable hook to your server rack or cabinet to provide an organized channel for your cables. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

Constructed of high-quality steel the cable D-ring measures 2.2 x 3.9in (5.7 x 10cm) and offers a flexible opening for easy insertion of bundled cables. Providing strain relief for attached cables multiple cable rings can be attached to your rack where you need them for a versatile cable management solution.

Please see our other cable management D-ring products for different size configurations: …

The CMHOOK1UN Vertical Cable Management D-ring lets you add a 1U metal cable hook to your server rack or cabinet to provide an organized channel for your cables. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

Constructed of high-quality steel the cable D-ring measures 1.8 x 3.9in (4.5 x 10cm) and offers a flexible opening for easy insertion of bundled cables. Providing strain relief for attached cables multiple cable rings can be attached to your rack where you need them for a versatile cable management solution.

Please see our other cable management D-ring products for different size configurations: …

Mount your network and telecommunications equipment with the convenience of adjustable depth

The RACK-24U-20-WALL-OA 24U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality sturdy relay rack solution that is easy to assemble and install into any environment.

Sturdy Construction & Easy Installation

The open rack features an adjustable depth ranging from 12-20 inches to accommodate larger data network and telecommunications devices. With a maximum depth of 20 inches this rack allows for mounting of shelves and other accessories with enough clearance at the back for cable management. The open-frame design help to keep your equipment cool and easily accessible from …

The RK12OD 12U 19in Desktop Open Frame 2 Post Rack provides the perfect mounting option for smaller Audio/Video and IT equipment where space is limited and a full sized cabinet is not required. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA) allowing government GSA Schedule purchases.

The 12U rack features a compact and lightweight free-standing design that is suitable for installation on or around your desk giving you easy access to the mounted equipment in your workspace. This lightweight 2 post rack is engineered to meet EIA rack mount standards and includes a pack of 20 M5 screws and Cage Nuts allowing you to mount up to five devices …

Mount a server or networking equipment to a wall with this open-frame bracket

This 2-post 8U adjustable wall mount bracket provides a convenient solution for mounting 19-inch rack-mountable shallow servers patch panels NAS devices UPS data and networking equipment. The adjustable depth enables customization to accommodate various equipment sizes.

Simplified Installation

This wall-mounted rack features fold-out sides for quick setup ships fully assembled flat-packed and includes all the necessary hardware: wood stud screws M5 cage nuts and M5 screws and speed up deployment. Four keyhole wall mounting holes provide a straightforward way to securely mount or unmount the rack. The mounting …

Use this wall mount network cabinet to mount your equipment to the wall

This 9U server rack cabinet lets you mount your EIA-310 compliant equipment to the wall. The enclosure features an adjustable mounting depth from 6 to 15 in. and offers a maximum load capacity of 200 lb. (90 kg).

Save space in your office or server room

Save valuable floor space by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom retail store server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools or placing equipment that's not rack-mountable.

Easily install …

2 Post Network Rack shelf | Black | 75 lb. (34 kg)

The 2 post server rack shelf allows you to add a high capacity mid-mount fixed shelf to almost any standard 2 post server rack.

EIA 310 Compliant

Our 2u rack shelf is EIA 310 compliant meaning it can fit most standard 19" 2 post racks. The included mounting brackets can be adjusted to accommodate different post depths making this center mount rack shelf a universal solution for 2 post rack storage while the vented design helps to improve airflow in the rack.

Solid Steel Construction

Constructed using SPCC commercial grade cold-rolled steel this durable 2 post network rack shelf can hold up to 75 lb. (34 kg) of equipment - …