Amplifiers

Amplifiers for installations / Total Connected Load 50 W

Mini Amplifier / Stereo / Output power per channel 50 Watt / 3.5mm-In / Bluetooth

Integrated Amplifier / 5.1 / Bluetooth

Digital-to-Analogue Converter

DI Box / Desktop / Number of Channels 1

Power Amp / Stereo / Output power per channel 480 Watt

Signal Processor / 19 Inch Size / Processor Type Graphic EQ / Number of Channels 2 / Rack Height 2 RU

  TOPPING NX1s Hi-Res Digital HiFi Portable Headphone Amplifier AMP   Description: Measured: 8.4cm*5.5cm*1.0cm Weight:78g Power input: DC5V/1A(PC s USB 0.5A) Charge time: 40 hours THD+N:

Main Features:  -The external configuration of high strength stainless steel horn protection net cover.  -Alloy fuselage to reduce the noise caused by the vibration.  -8 inch 650W high power design, with the volume controller.  -Low frequency ability of the bass horn, high quality low tone output.  -Fine workmanship and good performance.  -Easy to install, can be installed directly under the driver's seat.  -Durable in use.    Specification:  Voltage: 12V;  Impedance: 2Ω;  Sensitivity: 90dB;  Speaker Unit size: 8 Inch;  Rated Power: 600W;  Max Power: 650W;  Fuse Rating: 20A;  Bass Boost : 0 to +12dB;  Frequency Response: 20Hz-20KHz;  Color: Black;  Material: Mahogany;  Voice Coi…

Module model: BTM525 Bluetooth chip: QCC5125, 32m SPI flash built in the module Bluetooth version: 5.1 supply voltage: 3.0-4.3v Type: I2S Module size: 13mm x 18mm x 2.5mm Material:ABS colour:As shown Package Contents: 1 x Stereo Audio Module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Description: Dual channel stereo amplifier, suitable for karaoke and home acoustic sound system. The digital amp box USB, read U disk and memory card, Button Function: Previous, next, play/pause, knob controls for input, bass, treble, and volume, come with remote control. Mini HiFi BT power amplifier BT wireless connection. Adopts LCD display, backlight design, plug and play, dual microphone input, suitable for home and vehicle use. Specification: Model: AV-568BT Colour: Black Channel: 2.0 Rated power: 60W+60W Peak power: 500W+500W Load impedance: 4-16 SNR: 80dB Frequency: 20Hz-20KHz Remote control battery: CR2025, 3V, 150mA Voltage: 12V 110 V Plug: US Size Chart: Size: approx.

Complete AD7606 application circuit module.The on-board boost circuit provides 5V analog through LDO, eliminating 5V supply.On board ADR421 voltage reference, internal/external reference can be configured.Comply with the input protection resistance recommended by AD7606 datasheet Page 22.Material: PCBcolour: As shownPackage Contents:1 x AD7606 data acquisition synchronous sampling moduleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Features: 1¡¢The waterproof 4 pole speaker plug jacket is suitable for cables with a diameter of 6~15mm, which is fully in line with the industry standard for speaker connection 2¡¢Humanized locking design with chuck type stress release, accurate and reliable twist lock latch system is easy to operate 3¡¢The speaker plug has an extremely reliable and sturdy cable connector with a reliable locking system 4¡¢The product contact with the screw terminals firmly, including multi strand protection, and solder terminals 5¡¢The audio connector has a continuous rated power of 30A rms, nickel plated brass contacts possess good electrical conductivity, reliable connection, used in plug ins and shells to …

Supports Bluetooth version 5.0 Easy to use without removing the door or rerouting with just a plug and play System-type surround sound, pure fidelity high-quality speakers simple installation There are four sound channels This product can be manually adjusted by pressing buttons, as well as by adjusting the sound on a computer or mobile phone. It has a boost function and has a higher power than a regular DSP. It supports USB, Bluetooth, AUX fiber input, and 31 segment tuning Colour:grey Material:Metal Size:17.3 x 11 x 4.4cm Package Contents: 1 x audio amplifier Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color …

Features: 1.Precise cuts and interfaces ensure perfect fit, fit for mounting position and easy to install. 2.The product uses high quality materials, effectively avoid corrosion and wear out, and durable. 3.Professional chip set provides superior performance in the system. 4.Easy to operate, anti-aging, and extended service life. 5.On-board dial potentiometer to adjust the volume output. Specifications: Material: ABS Color: As picture shown Size: Approx. 5*4*2.5cm/2*1.6*0.98in Onboard TDA7297 audio power amplifier chip, dual channel 15W+15W, suitable for 4-8 ohm 10-50W speakers; The main pin of the chip has been taken out, convenient for external device control. The onboard 2 channel 5.08 (mm) …

Inductive energy transfer balance board, high current 1.2A energy transfer battery voltage balancer, significantly balance the battery voltage and improve the overall efficiency of the battery pack The module is the adjacent voltage difference equalization, the adjacent battery voltage difference reaches more than 0.1V, the chip internal triggers the equalization work, until the adjacent battery voltage difference is less than 0.03V and stops working, when it is used on the battery pack, there is adjacent voltage difference trigger when charging and discharging Balanced work, the battery pack voltage error will also be pulled back to an perfect value, reducing battery maintenance costs. When …

Ultra-low noise ,0.4 dB at 1.95 GHz High gain at 1.95 GHz,20 dB gain High linearity,+35 dBm output IP3 High input power robustness,+22 dBm CW Stable performance Buying Tips: The battery-free version requires -Tee power supply. Some devices have their own power supply function This product is a high linearity, ultra-low noise gain block amplifier type:gain amplifier Power supply:5V 70ma Frequency range:100K-6GHz 50 ohm input/output Connector:SMA female Weight:46g Power Suplly:B:3.7V 300mAH battery(no battery) Colour:As Shown Material:Metal Size:45x45x18.5mm(excluding joints) Package Contents: 1 * gain amplifier 1 * cbale Only the above package content, other products are not included. Note: Light …

Electric guitar combo amplifier with 10W RMS power, 6,5“ speaker, 1x guitar input, 3-band EQ - treble, mid, bass, gain and volume control overdrive can be activated, stereo plug input for aux, output for headphones (mini plug). Colour: black Type: Guitar Combo Battery Operation: No Power Supply: 240V Made in: China Reverb: No Number of Channels: 2 Number of Input Ports: 1 Speakers: 1x 6,5 " UK/EU Power supply included: No Headphone Output: Yes Power: 10 W DI Output: No Power (Watt): 10.0 MP3 / Line In: Yes USB: No

Trade in your Naim NAIT XS 3 High End Integrated Amplifier with AV.com. This amplifier praised for its big bold and dynamic sound excellent imaging and detail can be your ticket to exploring new audio equipment. You might want to trade this in to experience other integrated amplifiers that offer different sound signatures or feature sets. For example you could explore other brands renowned for their unique audio characteristics or delve into the world of valve amplifiers for a change of pace. Trading in with AV.com is all about discovering and experiencing the vast world of high-end audio.

Trade in your Naim NAIT-XS-2 High-End Integrated Amplifier with AV.com. This model known for its exceptional sound quality and high performance might be ready for an upgrade as your audio needs evolve. Trading it in allows you to explore newer models with advanced features or expand your setup with complementary equipment such as a high-fidelity preamp or a cutting-edge streaming device. At AV.com we make the trade-in process seamless ensuring you get the best value for your existing gear and access to the latest in audio technology.

Complete installation set comprising a WA-215 wall amplifier with inbuilt media player and Bluetooth, and a pair of 165mmØ (6.5”) 15W ceiling speakers with 10m speaker cable. Quick and easy to install, these in-ceiling speakers provide a full background music system for discreet installation in the home or commercial premises. Features: Bluetooth connectivity Touch operated control panel Audio playback from USB or microSD Inbuilt FM tuner IR remote control Specifications: Power supply: 100-240Vac, 50/60Hz (Euroblock terminal) Rated output power: 2 x 15W @ 8 Ohms Minimum impedance: 8 Ohms (each output) Bluetooth version: 4.1 Cutout: 170mmØ (each speaker) SPL: 98dB (1W, …

TOA VM3360VA Alarm system amplifier 8.0 channels Black

TOA VM-3360E audio amplifier Performance/stage Black