Amplifiers

The FiiO R7 Desktop Streamer with SP3 Active Speaker Hi-Fi System is for audiophiles valuing a low-profile high-performance desktop audio setup. This bundle features the FiiO R7 an all-in-one streamer DAC and headphone amplifier with the FiiO SP3 Active Speakers. The R7 delivers high-resolution audio and MQA through an ESS Sabre DAC and THX amplification perfect for any music enthusiasts collection. Both units share similar dimensions and incorporate LED lighting creating a cohesive look and adding a modern touch to your hi-fi setup. Learn more about these outstanding components below.

OFFER: Buy any FiiO DAP (M11S, M11 Plus, M15S, M17, R7) and SAVE £50 when you purchase FiiO's SP3 Speakers in the same basket using voucher code SP3SAVE FiiO R7 is the brand’s first-ever desktop digital audio player equipped with a high-performance ESS Sabre DAC chipset and high-power THX-788+ desktop-grade amplification chipset. It brings you the perfect combination of input and output options allowing you to use it independently or use it with other devices on your desktop chain. FiiO R7 supports high-resolution PCM and native DSD audio signal decoding. With Qualcomm’s 8-core Snapdragon 660 SoC chipset and 4 GB of RAM, R7 boasts open Android 10 OS with support for countless …

Excellent signal/noise ratio, lowest harmonic distortions and wide gain range make the QuadMic II a first choice for superior studio recordings. QuadMic II is battery powerable and thus excellent for remote applications. Each of the 4 channels features balanced microphone and line inputs with Neutrik XLR/TRS combo jacks, switchable 48 V phantom power, phase reversal and a low cut filter. All channels are also equipped with LEDs for signal presence, clip state, and activated phantom power. The input amplification can be set from 6 to 60 dB. The balanced line level output signals are provided on the rear of the unit as four 6.3 mm (1/4") TRS jacks. A maximum balanced and unbalanced output level …

QP2320 quad power amp 4 x 580WA range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers. Designed as a cost effective and efficient solution for multi speaker installations where sound quality is paramount.Fully balanced signal pathStable down to 2 Ohms2U rack-mountablePower rms @ 8 Ohms - 4 x 300WPower rms @ 4 Ohms - 4 x 450WPower rms @ 2 Ohms - 4 x 580WWeight - 23.5kgFuse rating - F12A

QP1600 quad power amp 4 x 400W

A range of quad power amplifiers with 4 fully independent channels and individual volume controls. Fully balanced line inputs and parallel outputs allow signal daisy-chaining to further amplifiers. Designed as a cost effective and efficient solution for multi speaker installations where sound quality is paramount.
Fully balanced signal path
Stable down to 2 Ohms
2U rack-mountable
Power rms @ 8 Ohms - 4 x 200W
Power rms @ 4 Ohms - 4 x 300W
Power rms @ 2 Ohms - 4 x 400W
Weight - 22kg
Fuse rating - F8A

DI Box / Desktop / Number of Channels 1

Signal Splitter / 19 Inch Size / Number of Channels 1 / Rack Height 3 RU

10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs. All inputs and outputs are balanced transformer isolated. Line input and outputs. Adjustable input gain (-8 to +25dB). Level meter. Headphone output to monitor the input level, headphone volume adjustable. Individual ground lift. switches for each output. Ground Lift switch for the input. Expandable setup thanks to the Bus In/Out sockets. Dimensions: 480 x 165 x 44.5 mm (19" x 1 U). Weight: 4.18 kg. In a black finish.
Type: Isolator;Splitter
UK/EU Power supply included: Yes
Made in: Germany
Power Supply: 240V

DI Box / Desktop / Number of Channels 2

The Phono Box DS2 is a highly adjustable phono preamplifier suitable for a wide variety of MM and MC cartridges. With the ability to switch easily between various impedance capacitance and gain settings this is easily one of the most user friendly phono stages capable of delivering a high-end sound. 

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China

DI Box / Desktop / Number of Channels 1

Joe Bonamassa Signature Model Guitar Speaker Simulator DI. The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced direct feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load. The PDI 03 JB has been developed for live, studio and home recording applications to eliminate the need for time consuming mic placement and mic-related problems. Designed to Joe Bonamassa's high standards for a huge but tightly focused tone the exclusive JB switch brings the output signal to the fore and takes it "right in your face." The PDI 03 JB's dual speaker simulation …

Passive 8-channels 19" DI Box. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device. Dimensions: 480 (19") x 200 x 45 mm (1 U), Weight 2,39 kg
Type: DI Box
Rackmountable: Yes
Made in: Germany
UK/EU Power supply included: No

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Active 2-channel DI Box. The Palmer PAN04A 2-channel DI box allows you to feed the unbalanced hi-Z signals of electric instruments to the microphone inputs of a mixer. It delivers a transformer balanced lo-Z signal at the outputs and helps eliminate hum and interference caused by ground loops. The active circuitry preserves frequency response and provides increased dynamics. The unit also features a 1/4" direct out and switchable -30 dB pad on each channel. An additional balanced XLR output merges both input signals to mono, e.g. for summing the L and R channels of a stereo instrument. With its tough construction, the PAN04A is equally suitable for stage and studio use. It operates on any standard …

Passive 2-channel DI Box. The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Dimensions: Width: 110 mm, Depth: 110 mm, Height: 45 mm - Weight: 0.419 kg
Battery Operation: No
Width (mm): 110.0
Headphone Output: No
UK/EU Power supply included: No
Inputs: Jack 6,3 mm TS
Power Supply: Passive
Number of Outputs: 4
Outputs: Jack 6,3 mm TS;XLR
Number of I…

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
Type: DI Box
Battery Operation: Yes
Power Supply: 48V Phantom
UK/EU Power supply included: No
Made in: Germany

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
UK/EU Power supply included: No
Type: DI Box

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug-in PSU.
Made in: Taiwan
Battery Operation: No
Power Supply: Adapter
UK/EU Power supply included: No

Microphone Pre-Amp / Desktop / Number of Channels 1