Amplifiers

Stereo full amplifier 2 x 60 watts DAC mode

Power: A true 200-watt experience. Unlike most amplifiers or receivers, the Monolith's 200 watts per channel rating is measured with all seven channels driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads. Additionally, there is NO current limiting and there is no protection circuitry in the amplifier circuit path. Even if the speakers' impedance drops to a low level, the Monolith is robust enough that the current is never limited. Dynamics: High resolution audio delivers the best in music and movie soundtracks. You deserve an amplifier capable of delivering clear and clean audio across a wide dynamic range! With a more than 120dB signal to noise ratio, the Monolith 3 …

Fully balanced ▶️TOPPING PA7 Plus utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission. Distortion is as outstanding as DAC ▶️ The distortion performance of PA7 Plus is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume

Fully balanced structure, Pure sound quality ▶️ The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 II/PA5 II Plus no more hum, no more noise, no more ground loop. THD+N as low as an excellent DAC ▶️ The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4Ω load, THD+N

High-quality phono stage for entry-level and mid-level record players Amplification and RIAA equalisation for Moving Magnet (MM) cartridges Special low-noise components, external power supply and internal shielding all help improve the overall sound Small size and attractive chassis allows installation close to record player

Features: HIGH POWER L-PAD - MONO Brand New High Quality Product Further details about the product, Please read full description

Nice appearance,also greatly improved the heat dissipation capacity With chassis temperature display, better control sound quality. Powerful driving force, proper magnification and precise volume control make A1 can match most of the desktop small bookshelf boxes and most of the earphones and earplugs on the market, and adjust (for specific gameplay, please scan the code and refer to the official account arti cle) to Satisfactory timbre.

Inputs 2x line and one microphone input adjustable with digital echo on the front panel The power package for a computer Separate treble and bass controls Suitable as a karaoke amplifier

Features: MINI STEREO AMPLIFIER Brand New High Quality Product Further details about the product, Please read full description

Denon Pro DN-F350 - 19 media player Class D amplifier - Extremely efficient Compact design can be screwed on or under a desk or counter 100 V line and 4 Ohm speaker outputs Easy to install and configure

JBL Mobile Club1KW Mono Subwoofer 1000w Amplifier

All-in-one Technics hi-fi package including SA-C600 media player & SB-C600 speakers CD, Radio, Phono Input, Optical Digital Input (including TVs), Coaxial Digital Input, USB Input, And More Bluetooth, AirPlay 2, Spotify Connect, TIDAL, Amazon Music, MCA-CD, MQA files and comes with Chromecast built-in Space Tune function that enables the adjustment of sound to suit the environment and location Built-in Phono Equaliser compatible with MM Cartridge

BT 5.0 with aptX HD capability (24 bit, up to 48 kHz) Analog volume control with motor potentiometer 2 pairs of RCA line inputs, variable output for subwoofer or other amplifiers Sturdy aluminium housing protects against interference, gold-plated RCA connectors Includes IR remote control

Product Country Of Origin: China Product Weight: 2235 (GR) Product Pack Size: Pack of 1

Product Country Of Origin: China Product Weight: 2235 (GR) Product Pack Size: Pack of 1

Supplied with 35 m loop wire for setting up an induction loop, SCART adapter, PSU Integrated alarm signal can be switched on additionally Dynamic compressor. 2-way tone control Adjustable input sensitivity for line and microphone LEDs for power, signal/PEAK and loop current

Pioneer A-10AD (S) integrated amplifier [genuine National] A-10AD (S) Product type: ELECTRONIC_COMPONENT_AMPLIFIER Brand: Pioneer

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC. The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz. 4x high-end dual op-amp OPA1612 and a large number of audio grade components. All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64. Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.

【High Performance DAC AMP Chip】: The SMSL AO300 uses the MA5332MS power amplifier chip, the CS43131 decoding headphone amplifier chip, and the NJW1194 Volume Control Chip. These cutting-edge chips have been designed to deliver exceptional audio performance, with minimum distortion and interference. It supports MQA and MQA-CD decoding and restores the sound of the recording studio. 【2.1 Channel Audio Amplifier System】: The stereo amplifier features a 2.1-channel active audio system with subwoofer output, delivering an output power of 165W x 165W. This system has been carefully designed to provide an immersive audio experience with deep bass and rich sound quality. Bluetooth 5.1 also

Ce petit amplificateur stéréo utilise une puce Infineon MA12070, une faible distorsion de 0,005 %, vous offre 2 x 80 W RMS x 2, ce qui permet de piloter facilement 280 watts (8 ohms), 320 watts (4 ohm) haut-parleurs passifs pour profiter de la musique et des vidéos de haute qualité. o

CNC aluminum shell - Nice appearance,also greatly improved the heat dissipation capacity Chassis Temperature Display - With chassis temperature display, better control sound quality

The AL200 is capable of direct sampling of PCM digital audio up to 32bit/ 768kHz without the need to downsample. It also supports native DSD playback up to DSD 256 without conversion. On the front panel, a 6.35mm TRS headphone jack is provided, capable of delivering significant power output. The volume control for headphones and passive speakers are separate, adjusting one will not affect the other. For the first connection of AL200 via Bluetooth, you need to pair it with your smart device. Subsequent connections will be automatically established within a few seconds after switching to Bluetooth input or turning on the device. When switching from Bluetooth input to other inputs, playback will …

The ES903902M uses the newest ESS patented HyperStream IV Dual DAC technology, and advanced SABRE HiFi architecture. The ES9039Q2M delivers a performance level that will satisfy the most demanding audiophile and pro-audio enthusiast. DL200 is capable of directly sampling PCM digital audio up to 32-bit/768kHz without downsampling. lt also supports Native DSD playback up to DSD512 without conversion. Optical/coaxial input supports DoP64 You can switch between 2 different USB modes in the menu. To use USB2.0, you need to install the driver and support 768kHz/32bit high bit rate audio files. Use the USB1.1 mode to support audio files up to 96kHz/24bit bit rate without driver, and directly connect …

Unmatched Performance With Latest AKM DAC Chipset: SMSL has featured the latest-generation AK4493S AKM DAC chipset on the latest Sanskrit 10th MK3. The DAC here has been implemented with great precision, it delivers quality high-resolution audio signal decoding with ultra-low distortion ratings!! 3rd-Generation XMOS USB Processor: Sanskrit 10th MK3 utilizes a 3rd-generation XU316 USB processor chipset from XMOS Technologies. It allows for clear transmission of high-resolution audio signals via the Input port and handing them over to the DAC chipset. With the help of this latest USB Chip, the Sanskrit 10th MK3 decodes high-resolution 32-Bit/768kHz PCM and native DSD512 signals. New Upgraded …