Submersible (Drainage) Pumps no brand

✔️ ANY ROOM - The Flo-Force max is a fantastic toilet macerator and an ideal replacement for the Saniflo Sanipro Up 6006 and saniaccess 3. If you want to have a bathroom, utility room or cloakroom in a location that does not have access to the main plumbing system, you can use this sewerage pump for just that ✔️ 600W POWERFUL MOTOR - Highly corrosion resistant, marine grade 304 stainless steel motor casing. No external pipes, joints, valves or clips. Durable and built to last, this 600W toilet pump allows for strong power with super quiet operation of only 55dB. With a maximum of 150 litres per minute this sewage pump is perfect for any home ✔️ 3x CONNECTIONS - Discharge pipe

Ideal for adding bathroom and toilet to any part of a house including basement or even in the spare room. Now you can simply put the toilet where there are no ordinary drains. The Flo-Force macerator has been fully tested and approved. It is IP54 rated, conforms to LVD, EMC and ROHS directives and is CE approved. It is very quiet in operation with only 55 Dba. The fully automatic macerator toilet, shower sewerage pump features 3 inlets ports and 1 outlet that enable you to connect sanitary devices including toilet, hand sink and more.in, Shower, Urinal, Bidet Incredible 60m horizontal and 5.5m vertical pumping power with a max flow rate of 140L/min. FREE 12 months warranty for complete peace …

✔️ ANY ROOM - The Flo-Force max is a fantastic toilet macerator and an ideal replacement for the Saniflo Sanislim pump. If you want to have a bathroom, utility room or cloakroom in a location that does not have access to the main plumbing system, you can use this sewerage pump for just that ✔️ 400W POWERFUL MOTOR - Durable and built to last, this 400W toilet pump allows for strong power with super quiet operation of only 55dB. With a maximum of 100 litres per minute this sewage pump is perfect for any home ✔️ 4x CONNECTIONS - With four separate inlet options, this macerating toilet offers flexibility and convenience. It can easily connect to multiple bathroom fixtures such as a sink, shower…

Designed for numerous residential uses including flooded basements, window wells, spas, cisterns, sumps, and flooding in low lying areas Continuous duty, efficient 115V psc (permanent split capacitor) motor for lower carbon footprint. higher efficiency using less energy to operate Made of corrosion resistant thermoplastic for long life Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Submersible for quiet operation Anodized aluminum motor housing for efficient motor cooling Semi-open thermoplastic impeller passes 3/8" solids Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products

The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this model also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401)

The Mizar/S (110V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed

The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode lower grade metal or plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and is also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed

The FloodMate 2 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 480 Watt submersible pump (model LSC1.4 capable of up 70 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 1mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting, it will pump water down to 1mm and can run dry for long periods

The FloodMate 2 is an emergency pumping kit for defending property from low level flooding. This set includes a 110V, 480 Watt submersible pump (model LSC1.4 which is capable of up 70 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 1mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting, it will pump water down to 1mm and can run dry for

The Select Brand Arvex/S (230V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade

The Arvex/S (400V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed

The Arvex/S (230V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features, but the included power cable is 10 metres allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed

This PSV7A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

This PSV6A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

750W Submersible Pump with integrated float switch. This submersible pump is ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particles up to 35mm dia. The integrated float switch will switch off the pump motor once the water level is reduced to a defined level. Being integrated within the pump housing it is usable in a more confined space than would be the case with conventional float switches Note: Suitable for use with clean or dirty water

400W Puddle Pump with Auto sensor - This submersible pump is ideal for draining flooded cellars, sumps etc. This is the perfect solution for clearing shallow bodies of water such as spillages because of its ability to pump as low as 1mm from the floor. Note: Suitable for use with clean water only

High power (750W) efficient submersible water pump with float switch. Benefiting from a big 208 litres per minute output and on/off float switch that can be set to operate or be turned off, for continuous duty. This submersible water pump is perfect for draining and transferring water in many different domestic situations. Examples of use include draining cellars and basements, flooded boats, pits, pools etc. It could also be used with the float switch disabled to drain blocked sinks or baths. Note: Suitable for use with clean water only

Clarke's CSV4A 1300W Submersible pump with float switch is an electric powered water pump that is perfect for draining and transferring water in many different situations, with its massive 417L /min flow and 11m Max. head. Examples of use include draining cellars and basements, ditches, footings etc. Note: Suitable for use with clean water or dirty water.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas.

Clarkes 110V powered industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.