Saws

A rigid oval tubular frame, with quick release tension lever, and a hardpoint saw blade with induction hardened teeth.

A rigid oval tubular frame with quick release tension lever and a hardpoint saw blade with induction hardened teeth.

IRWIN® Junior Saw Blades provide improved cutting performance. Their tooth geometry delivers higher resistance against tooth strippage and increases longevity and durability. Leveraging the advantages of WeldTec™ technology, IRWIN® hacksaw blades allow for faster, smoother and less tiring cutting. Can be used on metal and PVC. Specification Length: 150mm (6in)TPI: 32Additional Information:• Type: Length• TPI: Pack Qty.• Blade: 150mm

Features:Rotating rear handle:- Rear handle can be rotated into different positions.Cutting depth adjustment:- Allows half-cuts in order to obtain clean cuts and sharp edges during a second try.Angular adjustment:- Provides a precise and angle-accurate sawing of all required cuts.Dust extraction system:- Allows to collect dust in designated dust bag or to connect vacuum cleaner.Technical Specifications:- Rated power: 1700 W- No-load speed: 4200 minˉ¹- Circular saw blade Ø: 305 mm- Circular saw blade bore Ø: 30 mm- Max. cutting depth at 0° / 90° (H x W): 100 x 165 mm- Max. cutting depth at 45° / 90° (H x W): 100 x 105 mm- Max. cutting depth at 0° / 45° (H x W): 65 x 165 mm- Max. cutting depth at 4…

Hardened and tempered steel blade. Cuts on forward and back stroke, faster and smoother than conventional saws to give a smoother finish. Cuts hard, soft and man-made woods.

This 2 piece set consists of a 12” (300mm) engineer’s hacksaw and 6” (150mm) junior hacksaw both with lightweight aluminium frames.

A two piece hacksaw set which comprises a conventional full size model with adjustable blade tensioning for either 10" or 12" blades, plus the 6" Junior version with fixed sprung frame blade tensioning.

BASE FOR MITER SAW 90KG

BASE FOR MITER SAW 150KG

Universal fast cut finish, High carbon Sheffield steel blade. 8 ppi hardpoint teeth - last up to 5 times longer than conventional teeth. Fitted with suregrip handle. Length. 22" x 8pts.

Supergrip dual material handle for superb comfort grip. Precision cross ground teeth for the sharpest cut. Handy 45/90 angles guide built into handle.

150mm Aluminium Junior Hacksaw & Mitre Box 150mm aluminium hacksaw complete with mitre box for cutting 45 and 90 angles

This Fisco XFY rule is a general purpose four-fold rule for home, workshop, and trade use, made from hard-wearing ABS plastic. The brass hinged pins and end pieces extend the square's life, and has precisely inscribed and permanent graduations. Length 1m/3ft. Width 32mm.

Hardened and tempered high carbon steel blades. Solid wooden handle. Universal tooth form. Skewed back for improved balance and reduced friction when cutting.

Hardened and tempered high carbon steel blades. Solid wooden handle. Universal tooth form. Skewed back for improved balance and reduced friction when cutting.

Low-friction blade coating and triple-ground teeth for fast cutting through hard, soft and artificial wood. Cuts on forward and reverse strokes. Soft-grip handle.

Eclipse 70CP1R Coping Saw with a traditional wooden handle The Eclipse 70CP1R Coping Saw is for cutting and shaping wood. Fitted with a traditional wooden handle and capable of 360-degree blade rotation for easy access and cutting. Replacement Blades Features: Fitted with an Eclipse 14TPI Coping saw blade Designed for straight or profile sawing of wood up to 75mm (3") thick The flat section bow carries 2 blade holders both with a pin for easy blade fitting Blades are fitted with the teeth pointing towards the handle and cuts on the pull stroke The blade fits in the slots in the blade holder pins and can be positioned at any angle and tension is easily applied by turning the handle Specification: …

Spare blades for Teng Tools mini hacksawsSuitable for use with the 705A modelPack of 5 wood cutting 16 teeth 6-3/4" blades

5 spare blades for use with the 705 mini hacksaw frame.

Plastic with a non slip handleSuitable for use with any standard 12" hacksaw blades Supplied with a Teng Tools 12" hacksaw bladeIdeal for use as a key hole saw

2 spare 12" Swedish steel M2 HSS 24 teeth hacksaw bladesConsistent material quality gives consistent cutting ability

A professional quality steel hacksaw frame featuring an ergonomically designed aluminium handle with a soft rubber grip area on the handle and frame for a better grip. This hacksaw features a 12" Swedish steel M2 HSS 24 teeth blade for consistent quality. It also includes facility for presetting at a 45° or 90° cutting angle for awkward cutting positions.

Professional quality steel hacksaw frame featuring an ergonomically designed aluminium handle with a soft rubber grip. The frame includes a 300mm/12" HSS 24 teeth blade. There is a choice 45 or 90 cutting settings. The overall length of the hacksaw is 395mm.

Professional quality steel hacksaw frame featuring an ergonomically designed aluminium handle with a soft rubber grip. The frame includes a 300mm/12" HSS 24 teeth blade. There is a choice 45 or 90 cutting settings. The overall length of the hacksaw is 395mm.