Soldering Tools

GYS Multicool 1300 Universal Welding Machine Water Cooling Unit is a system designed to cool water-cooled torches connected to all types of welding machines (GYS or other brands). This device is autonomous and has its own power supply. The operation of the torch trigger can be controlled by liquid flow detection to protect the torch from overheating. Fitted with standard water cooled torch quick connectors, integrated flow sensor to protect torch from overheating due to a blockage and having a reinforced metal case and non-slip rubber feet. Rated IP23 S for outside use. GYS recommends filling with its low conductivity welding machine coolant with rust inhibtor (010132511).

Made of fine quality material, practical, easy to operate and use, has a long service life. Features: Press and hold the switch for more than 2 seconds to turn on the soldering iron and heat up and cool down quickly. Small and exquisite, light and easy to carry, easy to operate, convenient and practical. Fine quality stainless steel, will not rust, not easy to age, strong and practical. Fast heating, high / middle / low selection mode, tin melting within 15 seconds. Small head makes it perfect for SMD work and other small welding jobs. Auto sleep, automatic sleep for 10 minutes. Specifications: Main material: stainless steel Power: 8-10W Temperature (adjustable): 330-450℃ Tin melting time:

Size: body 24cm, Description: Rated power: 300 watts, Rated voltage: 110 volts, Product features: heating tools, which can be used to heat embossed powder and heat shrinkable film. Instructions: 1. Plug in the power supply and turn on the switch. 2. Keep a distance of 3-5cm from the work and heat it at an angle of about 45 degrees until the work is completed. 3. Turn off the power and wait for it to cool down Note: The heat gun has a high temperature, so be careful of burns when using it. You can directly blow hard with a hot air gun to make small soft pottery works. After baking, use a hot air gun to blow at high temperature for a few minutes, not only can it be hardened but also

This magnetic ground clamp benefits from a super simple set up, just place on a clean surface, connect earth and start welding. This unit means no more tacking on tabs or searching for grounds and it is rated to 250 Amps. Completing this tool is a firm grip on flat or round surfaces for added peace of mind.

Product Description: Material:Alloy, ABS Power:60W Tin Wire Diameter:0.8-1.2mm Working Temperature:430 Centigrade / 806 Fahrenheit Degree) Voltage:110V,50HZ Plug Type:US Plug Wire Length:125cm / 49..2" Size:19 x 12cm / 7.48" x 4.72" Color:Black, Green Features: 430 Centigrade / 806 Fahrenheit Degree) Heats up completely in 2-4 minutes, Working Temperature up to 430 Centigrade / 806 Fahrenheit Degree. Get rid of that old and worn out soldering tool and start saving time, effort now with this 60W soldering gun set, great for a range of light to heavy duty soldering tasks. Whether seasoned professional or DIY enthusiast this tool will meet the needs of the user. The co-molded

These small and strong welding clamps are extremely versatile, able to fit in confined areas to provide a strong hold for welding in hard to reach places where other clamps wouldn't fit. Designed for single hand operation to allow your free hand to hold the panels together ensuring an accurate weld. A must have for any workshop.

'J' welding clamp, manufactured for use on flanged lap joints. With 0-15mm adjustment.

Small and versatile, this micro welding clamp works like any other, yet it can be used in areas were regular sized clamps are not able to operate. Designed for single handed operation for increased welding accuracy and safety, this is perfect for positioning and fixing panels securely for welding, wherever and whenever needed.

This lightweight, precision Gas torch/soldering kit includes spare tips and solder and is refillable from a standard gas canister and is ideal for computer, in-car stereo systems/alarms etc.

This Lead Free Solder (100g/1mm) is manufactured from Tin (99.3%) and copper (0.7%) The melting point of the solder is 227-228°C.

Specification: Item Type: Pyrography Pen Wattage: 40W Material:Rubber Handle Phase:2 Plug:EU Plug Input Voltage: 220V Voltage Adjustment Range: 220V Current:AC Temperature:400℃ Grounding Resistance: 100Ohm Grounding Voltage: 2mV Power Mode:Electric Driving Mode:Electric Heating Package List: 1 x Pyrography Pen 5 x Solder Tip Label: Yes

Spare filter for welding helmet respirator (Laser Part No. 7927).

Soldering Iron Stand with combined mesh tip cleaner. Used to safely store and hold hot irons.

USB Soldering Iron, complete with stand. No need for mains cables, ideal for working on site.

Cordless 30W soldering iron with rechargeable Li-ion battery supplied with cone tip, chisel tip, heat shrink tip, 15g solder, cleaning sponge, stand and USB cable.

The Jobsite XL trolley not only provides easy mobility but also storage for your welding machine. Torch and earth clamp are also easy to access with the trolley. The trolley is compatible with most welding machines that fit the 584mm wide x 331mm deep base plate but spefically for the following GYS machines: MMA - Progys CEL 250 TRI Progys Flex 250CEL Exagon 400. TIG - TIG DC 160/168/200/250/300/Titan400 Protig 201/201L/220 Titanium400 AC/DC. MIG - Multiweld 250TCMultipearl 200-2 & 200-4 Plasma Cutters; Cutter 25/35/70/85TRI/125TRI/Neocut105. Optional gas bottle support tray is available (010129551).

Features: 1. An ideal replacement for factory handles on the heat guns 2. The handle comprises heating core, magnetic switch, temperature sensor and power cord 3. Made with high-grade material and fine workmanship, it is solid, reliable and durable 4. Rotary design is suitable for 858, 858D, 878A, 878D and 878D+ unsoldering work bench 5. Ultra long power cord allows for flexible and comfortable use Specifications: 1. Mode: 858 8858D 878A 878D 878D+ 2. Color: Black 3. Dimensions: (9.45 x 1.57 x 0.79)'' / (24 x 4 x 2)cm 4. Weight: 7.34oz / 208g

Material: Alloy tip=ABS strong plastic Working temperature: 430 degrees Celsius Power: 60W Warm-up time: 2-4 minutes Color: Green The package includes: 1x soldering

'L' welding clamp, manufactured for use in hard to reach areas. With 0-18mm adjustment.

'W' Style welding clamp, great for single sided spot and MIG welding.

Specifications: Cordless device, no electricity or batteries required for operation. Multi-function, melt small brazing rods and many other materials, such as gold, silver, copper, tin, aluminum. Ideal for light welding, repairs, soldering, jewelry making, hobbies, crafts, model making, etc. Portable pocket sized, lightweight and convenient. Easy to maintain and refill. It uses widely available butane gas.   Type: Gas Solder Iron Material: Plastic, Metal Flame Temperature: 1300°C Tip Temperature: 500°C Noise Decibel: 10dB Power: 30 - 70W Features: Lightweight, Portable, Convenient, with On/Off Switch, Adjustable Flame Size: 17.5cm x 3cm(Approx.)   Notes: Due to the light

Holzmann FW101 universal mobile welding trolley suitable for all types of welders. Made from sturdy and robust steel construction, this versatile trolley is the ideal mobile storage unit to mount your welding machines on. The top shelf is suitable for mounting the welding unit on, with centre and bottom storage compartments. There is also gas bottle storage and comes with two chains. The push handle and two moveable wheels plus swivelling castors make it a completely mobile unit. A universal welding trolley ideal for most welders and metal workshops Features: Universal mobile welding trolley Robust and sturdy steel construction Space for gas bottle with 2 chains for safe placement - 345 x 315mm …

A handy and easy to use tool, designed to create 13mm deep, 20 gauge steps or flange in sheet metal, or 7mm holes if required. Ideal for panel replacement, patching and for plug welding preparation.

This soldering iron is complete with a metal stand and 1.1m cable with approved plug. The 100W soldering iron provides a stable and constant temperature for all soldering tasks. A great soldering iron to have around the home or garage, designed for electronic and automotive applications.