Hammers

408 PLASTIC HAMMER WOOD HANDLE 25MM 250G

406 PLASTIC HAMMER WOOD HANDLE 19MM 150G

Strong yet lightweight, perfect for use where its not practical to use a full sized tool. Manufactured with a drop forged steel head, heat treated and tempered for durability and attached to a soft grip fibreglass handle. Ideal for gardening, root cutting, landscaping etc.

Strong yet lightweight, perfect for use where its not practical to use a full sized tool. Manufactured with a drop forged steel head, heat treated and tempered for durability and attached to a soft grip fibreglass handle. Ideal for gardening, root cutting, landscaping etc.

The BlueSpot 3 PCE Ball Pein Hammer Set features a soft feel TPR handle for a more secure grip. The 65% fibreglass shaft reduces fatigue and increases shock absorption during prolonged use. The rounded and striking faces are manufactured from drop forged, heat-treated hardened steel. Ideal for metalwork.

3pc G Clamp Set Malleable cast iron frame with T bar handle and swivel shoe. Sizes 25, 50 and 75mm

3lb Hoe Head Drop forged steel and heat treated. Size 180 x 280mm

Forged Steel Head And Shock-Absorbing High-Strength Fibreglass Shaft With Nylon Surround. Powder-Coated Head With Polished Striking Faces. High-Grip Handle Is Resistant To Oil And Chemicals. For General Demolition And The Driving Of Posts And Stakes.PTDTST394968

For malleable iron head hammers and split head hammers.

For the Thorex nylon faced and Thorace hammers, these red striking faces have a medium-hard hardness and are suited for light hammering applications and precision use on key components. Easy to change via the simple screw in action, the striking faces are colour coded to allow easy identification of material type and hardness. Manufactured from polyurethane, each face has a medium plastic shore D45-55 and is available in a range of sizes. Hammer head and handle are sold separately. Features and Benefits Colour coded to allow you to easily select the right face; red faces denote a medium-hard hardness Available in a variety of sizes to suit your hammer All faces are one piece moulded for durability …

Manufactured from compressed water buffalo hide, these replacement striking faces are designed for use with malleable iron head hammers and split head hammers. Available in a range of sizes to suit your pre-existing hammer. Features and Benefits Manufactured from compressed Water Buffalo Hide for durability and strength Hide face absorbs the shock of the blow and transfers the force to the item being struck without fear of damage to protect your workpiece but still deliver a firm blow Ideal where a heavy blow is required combined with a relatively small striking area for both precision and strength Faces are designed to wear and can be replaced to save you from buying an entirely new hammer …

For the Thorex nylon faced and Thorace hammers, these extra hard nylon faces are suited primarily for specialist applications. Easy to change via the simple screw in action, the striking faces are colour coded to allow easy identification of material type and hardness. In this case, the yellow colour denotes that the product is manufactured from nylon and is extra hard. Available in a range of sizes to suit your hammer. Hammer heads and handles are sold separately. Features and Benefits The threaded screw in action allows for simple and quick changing of the face Available in a variety of sizes to suit your existing hammer handle and head No metal inserts or pegs ensures no damage is done to …

For the Thorex nylon faced and Thorace hammers, these extra hard nylon faces are suited primarily for specialist applications. Easy to change via the simple screw in action, the striking faces are colour coded to allow easy identification of material type and hardness. In this case, the yellow colour denotes that the product is manufactured from nylon and is extra hard. Available in a range of sizes to suit your hammer. Hammer heads and handles are sold separately. Features and Benefits The threaded screw in action allows for simple and quick changing of the face Available in a variety of sizes to suit your existing hammer handle and head No metal inserts or pegs ensures no damage is done to …

Designed to deliver firm and solid blows on sharp surfaces, this range of extra hard brown replacement striking faces are extremely abrasion resistant and durable. With their easy to change design with a simple screw in action, each piece is one-piece moulded and does not possess any metal pegs. The striking faces are colour coded to allow easy identification of material type and hardness, with brown being constructed from tough polyurethane shore D58-62. Features and Benefits Easy to change with a simpe screw in action The striking faces are colour coded to allow easy identification of material type and hardness - Brown is for a tough, extra hard face Manufactured from durable polyurethane …

One of each size 4A 4AH and 5.PTDDRPDIR38994

Nylon Faced Allows the faces to be rapidly changed to meet the requirements of a specific component, minimising down time. The malleable iron head has two hex screws which distribute the clamping pressure evenly across the tapered sockets which securely lock the shaft and striking faces in place.

The nylon inserts with their hardness of approx. 73 Shore D are very hard. This white polyamide inserts offer outstanding impact qualities and are guaranteed to combine maximum strength with unique durability. They consist of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, they are therefore considerably more wear-resistant and durable and will never chip even in sub-zero temperatures. They stand up to the high impact forces produced by non-rebound soft-face mallets. What is more, they are oil and grease resistant and are also used on Supercraft soft mallets, Supercraft sledge hammers, punches and drop-mallets.- This article Supercraft insert for Supercraft …

The nylon inserts with their hardness of approx. 73 Shore D are very hard. This white polyamide inserts offer outstanding impact qualities and are guaranteed to combine maximum strength with unique durability. They consist of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, they are therefore considerably more wear-resistant and durable and will never chip even in sub-zero temperatures. They stand up to the high impact forces produced by non-rebound soft-face mallets. What is more, they are oil and grease resistant and are also used on Supercraft soft mallets, Supercraft sledge hammers, punches and drop-mallets.This article Supercraft insert for Supercraft …

The nylon inserts with their hardness of approx. 73 Shore D are very hard. This polyamide inserts offer outstanding impact qualities and are guaranteed to combine maximum strength with unique durability. They consist of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, they are therefore considerably more wear-resistant and durable and will never chip even in sub-zero temperatures. They stand up to the high impact forces produced by non-rebound soft-face mallets. What is more, they are oil and grease resistant and are also used on Supercraft soft mallets, Supercraft sledge hammers, punches and drop-mallets.This article Supercraft insert for Supercraft …

Anti-rebound mesh with head filled with steel balls for vibration reduction and full transmission of impact force, fully robotically welded and epoxy painted body, ergonomic hickory varnished wood handle, protective sleeve on the handle, secure connection between the body and the handle by means of an aluminum wedge and pin, and nylon jaws with excellent resistance to impact and long life. The mouths and the handle are replaceable.Features:- Anti-rebound mesh, protects the joints from vibrations.- Full transmission of impact force- Replaceable handle and jaws- Ergonomic hickory wood handleApplications:- Construction of industrial buildings- Construction of steel, stands at fairs- Maintenance- …

The BlueSpot 32oz (800g) Fibreglass Ball Pein Hammer features a soft feel handle for a more secure grip. The fibreglass shaft reduces fatigue and increases shock absorption during prolonged use. The rounded and striking faces are manufactured from drop forged, heat-treated hardened steel. Ideal for metalwork.

For the Thorex nylon faced and Thorace hammers, these replacement soft, PVC faces are ideal for assembly applications and applications where it is crucial to leave no marks on the workpiece. Easy to change due to the simple screw in action, the grey colour denotes the level of hardness of the product for easy identification. Manufactured from a soft PVC shore A63-73. Features and Benefits Soft Grey PVC face does not mark the workpiece, making it ideal for shop fitting and automotive work Faces are designed to wear and to be replaced by hand via the simple screw on action All faces are one piece moulded for durability and overall strength No metal pegs or inserts reduce the risk of damage to

For malleable iron head hammers and split head hammers.

For the Thorex nylon faced and Thorace hammers, these red striking faces have a medium-hard hardness and are suited for light hammering applications and precision use on key components. Easy to change via the simple screw in action, the striking faces are colour coded to allow easy identification of material type and hardness. Manufactured from polyurethane, each face has a medium plastic shore D45-55 and is available in a range of sizes. Hammer head and handle are sold separately. Features and Benefits Colour coded to allow you to easily select the right face; red faces denote a medium-hard hardness Available in a variety of sizes to suit your hammer All faces are one piece moulded for durability …