Files & Rasps

For intricate work, Manufactured from high carbon/chrome steel, hardened and tempered to HRC 62-64 files. Sold in boxes of 12 files.

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC10 half round engineers file has the following specifications:Blade Length: 250mm (10in). Blade Width: 24mm (7/8in).Additional Information:Type: Handled FileCut: Second CutLength: 250mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 250mm (10in)Cut: square second.Tanged.Additional Information:Type: Replacement FileCut: SecondLength: 250mm

Needle rasps are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.They are often used by engineers and model makers where precision is required.Each set contains six files fitted with comfortable soft grip handles,the files have a working length of 65mm, blade length of 100mm and an overall length of 150mm. Rasp set is ideal for use on wood. Six different file profiles as follows: Half-round, round, flat taper, square, flat, three-square.Additional Information:Type: Mixed SetCut: Mixed SetLength: 150mm

Bahco Half-Round Bastard Rasp 6-342-08-1-0 200mm (8in). Suitable for work on wood, plywood, wallboard, plastics and other soft materials. The edges and surfaces are tapered towards the tip.The surfaces are course rasp cut and the edges single cut. The file is supplied unhandled.File length: 200mmFile width: 21mmTeeth per cm: 10Type of cut: coarseWeight: 158gAdditional Information:Type: Half RoundCut: BastardLength: 200mm

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.Size: 10in.Smooth Cut Hand, FlatTanged.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 250mm

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size. 200mm (8in)Cut half round bastard Flat Side: Double CutHalf-Round: Double Cut.TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand smoothTangedAdditional Information:Type: Replacement FileCut: SmoothLength: 250mm

For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing.Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

The Faithfull Metal Frame Coping Saw with comfortable wooden handle. Ideal for cutting curves and intricate shapes in wood, fibre board, plywood, and plastic laminates. The blade can be set to any angle. Depth of Bow: 125mm (5in).Length: 165mm (6 1/2in).Teeth: 14 tpi.Additional Information:Type: SawLength: 165mmTPI: 14

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 250mm (10in)Cut: flat second.Tanged.Additional Information:Type: Replacement FileCut: Second cutLength: 250mmLength (inches): 10in

Bahco Knife Needle File Unhandled Cut 2 Smooth 2-308-16-2-0 160mm (6.2in). This file is used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. It is for fine filing and polishing jobs.Edges and surfaces taper to a point. Length: 160mmWidth: 5.4mmTeeth per cm: 38Cut: SmoothAdditional Information:Type: KnifeCut: SmoothLength: 160mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 250mm (10in)Cut: square smooth.Additional Information:Type: Replacement FileCut: SmoothLength: 250mm

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 250mm (10in)Cut: flat smoothTangedAdditional Information:Type: Replacement FileCut: SmoothLength: 250mmLength (inches): 10in

These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).The FAIFIHSC12 hand file has the following specifications:Cut: Second Cut. Blade Length: 300mm (12in). Blade Width: 25mm (1in).Additional Information:• Type: Handled File• Cut: Second Cut• Length: 300mm

Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half-round.Size: 16cm.Cut.: 0 (bastard).Type: half-round needle file.Additional Information:Type: Half RoundCut: BastardLength: 160mm

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand secondTangedAdditional Information:Type: Replacement FileCut: Second CutLength: 250mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: square bastard.Tanged.Additional Information:Type: Replacement FileCut: BastardLength: 250mm

These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).The FAIFIHB12 hand file has the following specifications:Cut: Bastard. Blade Length: 300mm (12in). Blade Width: 27mm (1.1/16in).Additional Information:• Type: Handled File• Cut: Bastard• Length: 300mm

For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing.Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)TangedAdditional Information:Type: Replacement FileCut: BastardLength: 200mm

Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Ideal for filing grooves, rectangular holes, internal corners and fine adjustment of cutting tools. 6 inch square handled second cut file.Additional Information:Type: Handled FileCut: Second cutLength: 150mm

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 150mm (6in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 250mm (10in)Cut: round smooth.Tanged.Additional Information:Type: Replacement FileCut: SmoothLength: 250mm

The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 250mm (6in)Cut: hand second.With ergo- grip handle.Additional Information:Type: Handled FileCut: Second CutLength: 150mm