Engine Oils

A fully synthetic four-stroke engine oil
Its special formulation ensures the protection required for frequent starting/stopping in city traffic.
Specially designed for modern 4-stroke scooters.

Fully synthetic engine oil with the revolutionary Ester Tech additives
The product ensures a high-strength oil film and highest compressive strength for extreme racing use
RS 959 is particularly suitable for 2-stroke engines with premix or intake manifold injection systems used for extreme racing
Mixing ratio: 2 - 4 %

Higher-power output.
A cleaner, more efficient combustion.
High-speed and high-temperature stability.
Optimum gas intake, even in wet weather.
Reduced fuel consumption.

SPECIFICATIONS: SAE 0W-20 Bi-Synthetic Engine Oil
RECOMMENDATION: API SP (RC), ILSAC GF-6A, HONDA HTO-06, GM dexos1 Gen2, GM 6094M, CHRYSLER MS-6395, CHRYSLER MS-13340, JAGUAR STJLR.51.5122, LAND ROVER STJLR.51.5122, FORD WSS-M2C947-A, FORD WSS-M2C947-B1, INFINITI, LEXUS, MAZDA, SUZUKI
PRODUCT PROPERTIES: Innovative energy-saving premium bi-synthetic engine oil (PAO + esters) for modern gasoline engines. Designed to meet the requirements of American, Japanese and Korean automakers.
ADDITIONAL INFO: Designed for gasoline engines of cars, light SUVs, vans and light trucks, where the API SP RC / ILSAC GF-6A performance level is required. Recommended for cars: CHRYSLER, MITSUBISHI, MAZDA, SUZUKI,…

SPECIFICATIONS: SAE 5W-30, API SN, ACEA C3, MB 229.51, VOLKSWAGEN TL 52 195, BMW Longlife-04, PORSCHE C30
APPROVAL: VOLKSWAGEN 504 00 Approval, VOLKSWAGEN 507 00 Approval
PRODUCT PROPERTIES: Universal fully synthetic premium engine oil (contains PAO) for modern petrol and diesel engines of VW group cars (including direct injection) with and without turbocharging, including those equipped with pump-injectors (Pumpe-Düse)
ADDITIONAL INFO: Designed for petrol and diesel EURO IV and EURO V engines for a wide range of VW vehicles (passenger cars, light off-road vehicles, vans and light trucks) with additional requirements for engine oils according to the 504 00/507 00 specification and the ones p…

Item Volume: 1 litres
Protects emission systems by helping to keep diesel particulate filters clean
Unsurpassed sludge protection no other motor oil can keep your engine closer to factory clean 1
Up to 2.1% greater fuel economy 2

Viscosity: 10W-40
Volume: 25 Litres
Meet OE Specifications
Always ensure you use the correct specification oil
Please check your oil level regularly

Viscosity: 10W-40
Volume: 25 Litres
Meet OE Specifications
Always ensure you use the correct specification oil
Please check your oil level regularly

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 4 litre. Recommended Use: MAN 3275. Recommended Use: MB 229.1. Recommended Use: MTU Type 2. Recommended Use: API CI-4/SL. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: Deutz DQC-III. Recommended Use: Cummins 200 76 / 77 / 78. Recommended Use: MB 228.3. Recommended Use: ACEA A3/B3/B4. Recommended Use: Renault RLD-2. Recommended Use: ACEA E7. Recommended Use: Volvo VDS-3. Recommended Use: VW 501 01/505 00. Recommended Use: Mack EO-M PLUS. Oil Viscosity Classification SAE: 15W-40. W…

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 1 litre. Recommended Use: ACEA A3/B3/B4. Recommended Use: Mack EO-M PLUS. Recommended Use: Cummins 200 76 / 77 / 78. Recommended Use: Deutz DQC-III. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: API CI-4/SL. Recommended Use: MTU Type 2. Recommended Use: MB 229.1. Recommended Use: MAN 3275. Recommended Use: Renault RLD-2. Recommended Use: ACEA E7. Recommended Use: Volvo VDS-3. Recommended Use: VW 501 01/505 00. Recommended Use: MB 228.3. Oil Viscosity Classification SAE: 15W-40. W…

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 1 litre. Recommended Use: API CI-4/SL. Recommended Use: ACEA A3/B3/B4. Recommended Use: MAN 3275. Recommended Use: MB 229.1. Recommended Use: MB 228.3. Recommended Use: Volvo VDS-3. Recommended Use: ACEA E7. Recommended Use: Allison C. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: Cummins 20071/-72/-76/-77/-78. Recommended Use: Deutz DQC III-05. Recommended Use: Mack EO-M PLUS. Recommended Use: MTU Type 2. Recommended Use: Renault RLD-2. Oil Viscosity Classification SAE: 20W-50. W…

PRODUCT INFO: Modern multifunctional additive in engine oil - a viscosity stabilizer designed to restore oil pressure and reduce its consumption in engines with high mileage.
PRODUCT PROPERTIES: Anti-wear components minimize wear on engines with any mileage and extend their service life.
ADDITIONAL INFO: Suitable for petrol and diesel engines and all types of engine oils (synthetic, mineral, etc.).
APPLICATION: Add to fresh engine oil at each oil change after the engine reaches operating temperature.
ATTENTION: The contents of one container are sufficient for lubrication systems up to 5 litres of oil.

SPECIFICATIONS: SAE 0W-30 Bi-Synthetic Engine Oil
RECOMMENDATION: API SN Plus, API SP, ACEA C2, ACEA C3, BMW LL-12FE, MB 229.61, FORD WSS-M2C950-A, OPEL OV0401547, PSA B71 2290, PSA B71 2312
PRODUCT PROPERTIES: Innovative universal bi-synthetic (PAO+esters) premium engine oil for modern petrol and diesel engines with and without turbocharging.
ADDITIONAL INFO: Designed for petrol- and diesel-powered engines of MERCEDES-BENZ, FORD, BMW etc. passenger cars, lightweight off-road vehicles and light trucks that impose additional requirements for engine oils in accordance with the listed specifications and the preceding ones or where the performance level of API SP or lower and ACEA C2/C3 of the …

SPECIFICATIONS: SAE 5W-30 Synthetic Engine Oil
RECOMMENDATION: API SN/CH-4, ACEA A3/B4, VOLKSWAGEN 502 00, VOLKSWAGEN 505 00, VOLKSWAGEN 503 01, VOLKSWAGEN 501 01, MB 229.3, MB 229.5, BMW LL-98, RENAULT RN0710, RENAULT RN0700, FORD WSS-M2C913-B
PRODUCT PROPERTIES: Innovative universal premium ester-containing engine oil for modern gasoline and diesel engines with and without turbocharging. Designed based on the requirements of European car manufacturers.
ADDITIONAL INFO: Designed for gasoline and diesel engines of a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
DISCLAIMER: The oil is not suitable for use in heavy trucks and …

Version: OUTBOARD 2T; Oil: Synthetic Oil; Supplementary Article / Supplementary Info Info 2: for difficult operating conditions; Engine Model: 2-Stroke; Specification: API TD, NMMA TC-W3; Capacity [litre]: 1; Packing Type: Bottle; API specification: TD

SPECIFICATIONS: SAE 5W-30 Synthetic Engine Oil
RECOMMENDATION: ACEA C4, RENAULT RN0720, MB 226.51, MB 229.51, MB 229.31, API SN, NISSAN Diesel engines with DPF
PRODUCT PROPERTIES: Innovative universal ester-containing fully synthetic premium engine oil for modern diesel and gasoline engines with and without turbocharger equipped with particulate filters (DFP / FAP).
ADDITIONAL INFO: Designed for gasoline and diesel engines of cars and light trucks of European and other manufacturers that comply with EURO III, IV, V standards equipped with catalysts (TWC) and diesel particulate filters (DFP / FAP), where SAE 5W-30 oil, corresponding to ACEA C4, is recommended.
DISCLAIMER: The oil is not suitable …

Durable & Design
Value for money
Easy to use

Motorex Engine Oil 10W60 Power Synt 4T
If you are not sure whether the item is suitable for your vehicle, please contact us by email.

Provides optimum engine performance. Removes deposits on valves in the combustion chamber and prevents new build-up.
Easy to use
Good product for use

Motul produces top lubricant in premium quality
Matched to your Anspruchvollsten requirements in the market
Products with international approval and certification
Specialist for lubricant for over 150 years

Original febi bilstein replacement part - Solutions "Made in Germany"
Volume: 4 litres, recommended use: ACEA A1/B1, recommended use: ACEA A5/B5, recommended use: API SN/CF, recommended use: ILSAC GF-3, recommended use: ILSAC GF-4, recommended use: Ford WSS-M2C913-D, recommended use: Ford WSS-M2C913-C, viscosity class SAE: 5W-3. 0, 0, 0, , 140 lbs
OE numbers (for comparison purposes only): Iveco (LCV): 17-1811 S1, Renault: RN0700, use no. For liquids: Renault RN 0700, universal use & LCV: SAE 5W-30 HC-FO 1L, utility no. For liquids: STJLR.03.5003, Jaguar: STJLR.03.5003, Ford: WSS-M2C913-D
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle.…

Car Engine Oil / Inhalt 1 l / Approved for Volvo VCC RBS0-2AE

Fully synthetic, high performance 4-stroke oil
High friction coefficient
Reduces oil consumption. protects against wear
No moly additives
Specifications: JASO MA/API SG/ACEA A3