Gear Oils

Additive Treatment for Manuel Gear-Box / Transmission Seals up micro caverns and scratches on working surfaces Optimizes gear contact & Provides significant fuel economy (especially in four-wheel drive vehicles) Reduces noise and vibration levels by 10 times & Increases gear shifting accuracy Allows transmission to function for up to 1,000 km (approx. 600 miles) in the event of heavy loss of transmission lubricant Improves operation of synchronizers

High performance synthetic Technosynthese fluid specially engineered for Continuously Variable Transmission (CVT) gearbox type. Suitable for use in a wide range of vehicles fitted with CVT gearboxes using either chain/pulleys or belt/pulleys design. Especially suitable for vehicles from American car makers GM, FORD, CHRYSLER,?, Asian car makers HONDA, HYUNDAI, KIA, LEXUS, INFINITI, MITSUBISHI, NISSAN, SUBARU, TOYOTA,... or European car makers AUDI, BMW, CITROËN, MERCEDES, PEUGEOT, MOTUL-MULTI CVTF is a high tech multi vehicles CVT fluid suitable for a wide range of CVT-equipped passenger cars, including belt-CVT and chain-CVT design. Allows fuel economy for cars fitted with CVT automatic g…

Specially designed for racing vehicle gearboxes : speed way, rally, raid All hypoid differentials with limited slip system (LS or LSD), gearbox with integrated limited slip differential, mechanical transmission, synchronized or not synchronized gearboxes. STANDARDS Above existing standards API GL-5 MUGEN Le Mans 24H – HEWLAND and X-TRAC Japanese GT. 100% Synthetic Extreme Pressure high performance lubricant for an efficient anti-wear protection, a better resistance at high temperature and a longer life time. Included friction modifier avoid noisy or dragging limited slip differential. 0% shear loss : Unshearable oil film in extreme conditions. 140 viscosity grade at high temperature to pr…

TYPE OF USE Specially recommended for gearboxes hard to shift. All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential and transfer gearboxes. FEATURES Without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. PERFORMANCES STANDARDS API GL-4 / GL-5 MIL-L 2105 D Extreme Pressure lubricant for an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. Stays in 80 viscosity grade after KRL 20 hours shear test as requested by SAE J306 Standard. Very high lubricating power which decreases friction and wear.…

Specially designed for the transmission of high performance and racing vehicles: Track, Rally, Rally Raid, electric vehicles transmission. 100% Synthetic - Ester - Extreme Pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time. Contains a special friction modifier to avoid noisy or dragging limited slip differential. Very low shear loss by the severe test KRL 20H, thanks to the synthetic ester base with very high viscosity index (VI). Very high lubricating power which decreases friction and wear. Fluid at low temperature to allow easier gear shifting in cold conditions. Less effort required on the gear lever to shift the gears.…

Allows fuel economy for cars fitted with automatic gearboxes by reducing friction. Improves automatic gearboxes reaction at cold temperature. - Anti-wear, anti-corrosion, anti-foam. Gives superior automatic transmission response: smoother shift feels and minimized shift time lag. Provides anti-shudder performance to avoid vibrations on engine fly wheel. Protects gears that are more and more numerous, compact and heavily loaded. Extends life time duration, better shear stability at hot temperature and oxidation resistance.

GL5 SAE 75W-80 Gear Oil is a high-performance highpressure gear oil based on synthetic and mineral base oils and high-quality additives. Semi-synthetic gear oil with extremely high performance reserves which ensures exact friction behavior and provides outstanding ageing resistance and also has outstanding low-temperature behavior GL5 SAE 75W-80 Gear Oil can also be used in manual transmissions to deal with unwanted noise and to solvegear-changing problems. Properties - excellent viscosity/temperature properties - for eliminating shifting problems - outstanding resistance to oxidation - outstanding friction characteristics - outstanding corrosion protection - very good low-temperature properties …

High-performance high-pressure gear oil made from carefully selected base oils and multifunctional extreme pressure additives. For high-load motor vehicle transmissions, particularly axle drives with hypoid gearing. Properties - reduces running noise - does not attack common sealing materials - excellent resistance to aging - excellent viscosity/temperature properties - minimizes wear - high pressure-absorption capability Only use in manual transmissions for which API GL 5 oils have been stipulated. During selection, keep to the viscosity class stipulated by the transmission manufacturer. Miscible with all branded gear oils. Fully effective only when used alone.

TOP TEC MTF 5100 75W is low-viscosity high-performance transmission fluid. Thanks to its excellent shear stability,this oil offers high potential fuel savings and optimum wear protection. TOP TEC MTF 5100 75W ensures outstanding shifting comfort under all operating conditions thanks to the good viscosity temperature properties. this oil is especially used for manual and automated manual transmissions. Properties - Outstanding shifting comfort under all operating conditions - outstanding corrosion protection - excellent viscosity/temperature properties - excellent synchronous behavior outstanding - resistance to oxidation The specifications and instructions from the assembly or vehicle manufacturer …

Our fully synthetic high-performance gear oil SAE 75W-90 is a top grade, high-pressure gear oil for high load manual, auxiliary, transaxle and hypoid transmissions. High-quality, synthetic-based oil and modern additive technology ensures a broad application range and optimum transmission lubrication under extreme conditions. The low viscosity characteristics of this gear oil make it also suitable where shifting difficulties exist (e.g. stiffness or noise generation). PROPERTIES - Outstanding seal compatibility - Excellent resistance to aging - Excellent wear resistance - High pressure-absorption capability - Reduces gearshift resistance - Excellent corrosion protection The requirements of …

Fully synthetic high-performance, high-pressure gear oil For extremely high-load manual, auxiliary, transaxle and hypoid transmissions. Ensures exact friction behavior and provides outstanding ageing resistance. Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning. Miscible with any mineral-base oil residues remaining during oil changes in transmissions and axle drives. PROPERTIES - distinctive high-pressure characteristics - excellent wear protection - reduces gearshift resistance - outstanding viscosity stability - reduces transmission noise - outstanding corrosion protection APPLICATION - While application the requirements …

High Performance Gear Oil GL3 is based on synthesis technology with extremely high performance reserves. This Gear oil ensures a broad application range and optimum transmission lubrication under extreme conditions with long oil-change interval up to 320 000 km. The low-viscosity characteristics of this gear oil make it also suitable where shifting difficulties exist (e.g. stiffness), where for example problems occur with the use of high-viscosity/single grade oils. PROPERTIES - reduces gearshift resistance - extremely long oil change intervals - outstanding corrosion protection - excellent wear resistance - excellent viscosity/temperature properties - reduces transmission noise - very compatible …

Top Tec MTF 5200 75W-80 is low-viscosity high-performance transmission fluid with excellent high pressure and wear protection properties. This Multi-purpose gear oil reduces friction, lowers fuel consumption and emissions and ensures smooth shifting operations. The outstanding thermal and oxidative stability assures a clean transmission and a long oil service life. PROPERTIES - Excellent high-pressure and wear protection properties - Saves fuel and reduces pollutant emissions - Reduces gearshift resistance - Excellent synchronous behavior - Optimum stability to aging - Outstanding resistance to oxidation Developed for use in transaxles, manual transmissions and transfer cases. The specifications …

High-quality, fully-synthetic hypoid gear oil for extreme load conditions, which has been specially developed for use in final drives with and without locking differentials. This oil is capable of altering the frictional coefficient between the clutch plates in such a way as to prevent stick-slip and its consequential judder. SUITABLE FOR extremely high-load final drives with and without locking differentials and ancillaries. PROPERTIES - excellent viscosity/temperature properties - reduces running noise - outstanding corrosion protection - excellent wear resistance - very compatible with seals - high pressure-absorption capability - for extended oil-change intervals - excellent resistance …

Top Tec ATF 1950 is an automatic transmission fluid for ideal performance thanks to its premium combination of active agents. Top Tec ATF 1950 outstanding stability of the friction coefficient enables extended oil change intervals. Properties- reduces fuel consumption- excellent viscosity/temperature properties- outstanding friction characteristics- high efficiency- very good low-temperature properties For the new generation of the Mercedes-Benz-9-speed automatic transmission. The specifications and instructions from the assembly or vehicle manufacturer must be followed. Cannot be mixed with oils of other specifications.

Top Tec MTF 5300 70W-75W is fully synthetic, low-viscosity high-performance transmission fluid. Thanks to its excellent shear stability, it offers high potential fuel savings and optimum wear protection. Top Tec MTF 5300 70W-75W ensures outstanding shifting comfort under all operating conditions due to the good viscosity-temperature properties. PROPERTIES - low fuel consumption - Excellent wear resistance - Outstanding corrosion protection - Excellent synchronous behaviour - Outstanding resistance to oxidation Used especially for manual and automated manual transmissions (DSG). Optimum effect only when the product is used unmixed.

Motul Multi DCTF is a high performance Technosynthese lubricant specially engineered for Dual Clutch Transmission (DCT) gearbox type. Suitable for use in a wide range of vehicles fitted with DCT gearboxes featuring Double-Dry Clutch Transmission and Double-Wet Clutch Transmission design.

Motul Multi DCTF is a high performance Technosynthese lubricant specially engineered for Dual Clutch Transmission (DCT) gearbox type. Suitable for use in a wide range of vehicles fitted with DCT gearboxes featuring Double-Dry Clutch Transmission and Double-Wet Clutch Transmission design.

High performance Technosynthese fluid specially engineered for Continuously Variable Transmission (CVT) gearbox type. Suitable for use in a wide range of vehicles fitted with CVT gearboxes using either chain/pulleys or belt/pulleys design.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.