Chargers & Jump Starters

High power AccuMate for car, truck, bus & coach batteries IDEAL FOR : 12V & 24V STD, AGM, GEL lead-acid batteries, starter and deep cycle, from 17Ah (12V) or 9Ah (24V) up to 300Ah. LOW VOLT START: Low Volt Start of 3V for 12V / 16V for 24V batteries. CHARGING AMPS : 3.5A (24V) / 7A (12V) (temperature compensated) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

For Telwin welding machines Compatible with other brand welding machines Suitable for Co2 and Argon Gauge scale 0-315 Bar. flow meter scale 0 - 12 L/min Can be used with refillable cylinders

Charging in 12 volt free mode: 2 A/14.4 V Charging in 12 V fast mode: 4 A / 14.4 V Charging in winter mode: 4 A / 14.7 V The device is equipped with protection against short circuit, overload and reverse polarity.

Selection of charging current: 2 A / 8 A / 15 A Choice of battery type: STD / AGM / CAL ✅ Intelligent portable charger for charging 12 volt acid, gel, AGM and MF batteries. Power supply 230 V, charging voltage 12 V, charging current 2/8/15 A.

J1000

AW401

Victron Energy Orion-Tr Smart 24/12-Volt 30 amp 360-Watt DC-DC Non-Isolated Charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth and IP43 protection Can be used in 12-Volt or 24-Volt systems and is suitable for both lead acid and lithium batteries, unlimited multiple units can be connected in parallel to increase output power With Bluetooth Smart enabled the unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery Screw terminals: The screw terminals give the advantage of …

Bluetooth Smart enabled Fully programmable, Remote on-off All models are short circuit proof and can be paralleled to increase output current High temperature protected, IP43 protection Screw terminals, Input fuse (not replaceable)

Bluetooth Smart enabled Adaptive 3-stage charge algorithm: bulk ? absorption ? float Remote on-off IP43 protection High temperature protected

High efficiency, IP43 protection, Screw terminals Technical Specification: Input voltage range - 18-35V, Output voltage - 12.5V, Efficiency - 97%, Continuous output current - 10A, Max. Output current - 12A, Galvanic isolation - no, Operating temperature range (derate 3% per °C above 40°C) - -20 to +55°C, DC connection - Screw terminals Dimensions: Height - 73mm, Width - 94mm, Depth - 37mm, Weight - 0.2kg 5 Year Warranty

CHARGE YOUR 12V BATTERY FROM ANOTHER 12V BATTERY! NO AC POWER REQUIRED!Recharge your trailered motorcycle, ATV or speed boat’s battery on the way to the venue! SAVE: Low Volt Start of 1V. CHARGING AMPS: 2A. Model TM-500 IDEAL FOR: STD, AGM & GEL 12V batteries from 3 – 96Ah. USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C). STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead, standard battery clip set & fused battery clip set included. INPUT: 12-16 V, 2.7A max,

Electrify your tankbag (with a “crosshair” current input) or create a weather-proof power connection on your hardcase! Length: 10 inches (25 cm). DC 2.5 x 5.5 mm inner socket. -40°C/-40°F - Suitable for use at very low temperatures. Cable remains flexible at temperatures below freezing. Max. current rating: 5A. With line rubber seal for OptiMate heavy load SAE connection.

2 cigar auto sockets with internal locking slots and sealing caps accept 2 automotive plug style USB chargers or GPS adapters

Power your heated clothing fitted with a 5.5mm by 2.5mm plug directly from your permanent battery lead M6 ringlets Length 50cm

Compatible with standard TM connectors Reliable weatherproof connection Length: 250cm

Compatible with standard SAE connectors Innovative Heavy-Duty Connection System Reliable Weatherproof Connection Thick Copper 18 SWG Cable Length: 15cm

Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 18 SWG cable Length: 50cm

Y Splitter Motorcycle 90 ° rotating connectors, 2 x in-car socket output Colour: blue Model Number: O-36 Country of origin:- China

Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 18 SWG cable Length: 50cm

Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 18 SWG cable Length: 15cm

Upgrade your old TecMate or British charger to connect to the OptiMate (or other SAE connection) permanent battery lead. Length: 6 inches/15 cm. -40 °C/-40 °F, can be used at low temperatures. Maximum Current rating: 5 Amp. Ket/TM/UK 2-pin connection converts to a standard 2-pin SAE connection.

Charge your Android phone, Microsoft smartphone, tablet, camera or Bluetooth device with our USB micro universal charging cable. Length: 30 cm (12 inches). Weatherproof. Included: 100 cm/40 inch USB-USB extension. High-quality cable, developed by TecMate. -