United Kingdom
Catalog   /   Computing   /   Components   /   Computer Cases   /   Antec

Antec Performance 1 FT black (0-761345-10088-5)

Photos - Computer Case Antec Performance 1 FT black
Photos 21
Antec Performance 1 FT black
black white
Chassis Form Factor:Full Tower
Motherboard size:E-ATX
PSU power:no PSU
Internal bays 3.5":2
Internal bays 2.5":3
Front panel:USB C, USB 3.1 gen1
All  specifications

Buy Antec Performance 1 FT black

All prices 10 →
When you make a purchase through links on our site, we may earn an affiliate commission.

Antec Boitier Grand Tour E-ATX Performance 1 FT avec panneaux vitrés Noir

Antec iUnity: Provides instant data on PC specs. International products have separate terms, are sold from abroad and may di... moreffer from local products, including fit, age ratings, and language of product, labeling or instructions. 2 Cable Covers Included for Optimizing the Cable Routing. Dual 4mm Tempered Glass Side Panels for Better PC Showcase. Type-C 10Gbps Port Ready.
Amazon.co.uk
Delivery: to United Kingdom
Report
£132.00

Antec Performance 1 Full Tower Black 0-761345-10088-5

Antec Performance 1 Full Tower Black
Smartteck.co.uk
Delivery: to United Kingdom
Report
£119.66

Antec Performance 1 Full Tower Black 0-761345-10088-5

Full Tower E-ATX Highly Compatible Gaming Case   - CPU/GPU Temperature Display - Antec... moreiUnity Software for instant data on PC specs - USB Type-C (10Gbps)  - 4mm Tempered Glass Side Panels - 4x 30mm Thick Pre-Installed Storm T3 PWM Fans - Airflow-enhancing Mesh Front Panel - Supports RTX 40 Series Graphics Cards - Thoughtful Design Features - Modular Drive Trays CPU/GPU Temperature Display By pressing the switch button on the I/O panel users can glance at the temperature of the CPU and GPU on the temperature display.  The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.    Note: The Antec iUnity software must be installed.         Antec iUnity    The Antec iUnity Software provides instant data on PC specs loads and usage. Download here     I/O Panel  - Including the mainstream USB Type-C (10Gbps) port for high-speed transfer - Included dust plugs for dust prevention. - Mic/Audio 2-in-1 port       4mm Tempered Glass Side Panels   Both side panels adopt tempered glass for better PC showcase visual effects.       Cable Management On Point    2 cable covers are included for beautifying the cable management area.    There are ten sets of velcro straps for easy cable management:    - Three sets of velcro straps for fan & I/O cable routing  - Five velcro straps for hardware and power supply cables  - Two velcro straps at the rear for rear I/O cable routing.           30mm Thick Pre-Installed Storm T3 PWM Fans - 3 x Storm T3 140mm PWM Fans at the Front - 1 x Storm T3 120mm PWM Fan at the Rear The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades efficiently increasing the air intake.  The PWM function easily reaches the balance between cooling and silence.         Exquisite Steel Mesh    The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.         Best Airflow Path For GPU Cooling    Airflow-enhancing mesh front panel provides massive air.    Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling       Dust Filters - Top: Magnetic dust filter - Front: Magnetic & clip-on dust filter - Bottom: Full-sized pull-out dust filter.       Supports
Quzo.net
Delivery: to United Kingdom
Report
£120.15

Antec ANTEC Performance 1 FT Case, Black, E-ATX Full Tower, Temperature Di

Antec Performance 1 Full Tower E-ATX Highly Compatible PC CaseSystem Status at a Glance - Temperature DisplayBy pressing the... moreswitch button on the I/ O panel, users can glance at the temperature of the CPU and GPU on the temperature display. The temperature display can be switched from CPU to GPU temperature or turned off via the switch button.**Using Antec iUnity software.Antec iUnity provides instant data on PC specs, loads and usage.I/O PanelIncludes USB Type-C (10Gbps) for high-speed data transfer. Includes dust plugs for dust prevention and mic/ audio 2-in-1 port.4mm Tempered Glass Side PanelBoth side panels adopt tempered glass for better PC showcasing visual effects.Everything Organised - Cable Management On PointTwo cable covers are included for a tidy cable management area, with 30mm clearance.There are 10 sets of Velcro straps for fan and I/O cable routing, 5 straps for hardware and power supply cables and 2 straps at the rear for I/O routing.Easy InstallationRemovable top cooling bracket. Support for 1 x 420mm radiator and 1 x 360mm radiator.4 x Preinstalled 30mm Thick Fans3 x Storm T3 140mm PWM fans at front.1 x Storm T3 120mm PWM fan at the rear.A 1-to-3 fan splitter cable with PWM function is included.The Storm T3 PWM fan features thicker and longer fan blades, efficiently increasing air intake, balancing between cooling and silence.Exquisite Steel MeshThe mesh front panel features 1.2mm vent holes and a magnetic clip-on design with easy access.Best Airflow Path for GPU CoolingAirflow-enhancing mesh front panel provides massive air flow. Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for GPU cooling.Magnetic Dust FiltersTop magnetic dust filterFront magnetic and clip-on dust filterBottom full-sized pull-out dust filterSupports RTX 40 Series Graphics CardsFull-tower PC case in 230mm width supports 40 Series GPUs and high-end PC components.Modular Drive TraysSupports up to 5 x drives - 2 removable drive trays for 3.5-inch HDD/ 2.5-inch SSD and 3 x drive trays for 2.5-inch SSDs.Cooling CompatibilitySupport for up to 10 x fansMore FeaturesStud fixings for a more convenient DIY experience.Drop-Proof Bolt hook design avoids side panel damage8 x Fully open PCIe Slots - bridgeless design supports vertical GPU installationBack-Mounted PSU Bracket for easy installation4 x rubber grommets for cable routingRear velcro straps for rear I/O cable routingSpecificationsDimensions522 x 230 x 522 mm (DWH)Form FactorFull TowerMaterialsSteel + Plastic + GlassMainboard SupportE-ATX, ATX, Micro-ATX, ITXFront Access & ControlsPower, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1Side Panel4mm Tempered Glass(Both Sides)Drive BaysExpansion Slots83.5" / 2.5"2 / 22.5"3FanFront3 x 120mm / 3 X 140mmTop3 x 120mm / 3 x 140mmPower Supply Shroud3 x 120mmRear1 x 120mmRadiator SupportFront120 / 140 / 240 / 280 / 360 / 420mmTop120 / 140 / 240 / 280 /
Backtotheoffice.co.uk
Delivery: in United Kingdom
Report
£119.99

Antec Performance 1 FT Gaming Case - Black, E-ATX, Window 0-761345-10088-5

Unveiling the Antec Performance 1 FT Black Case: Elevate Your Gaming Experience Introducing the Antec Performance 1 FT Black... moreCase Discover the epitome of gaming excellence with the Antec Performance 1 FT Black Case, designed to deliver unmatched performance and compatibility for your gaming rig. Highly Compatible Full Tower E-ATX Case Equipped with advanced features and thoughtful design elements, the Antec Performance 1 FT Black Case offers a seamless building experience for PC enthusiasts seeking maximum compatibility and performance. CPU/GPU Temperature Display for Instant Monitoring Stay informed about your PC's performance with the convenient CPU/GPU temperature display on the I/O panel. With the Antec iUnity software, easily monitor vital system metrics in real time. USB Type-C (10Gbps) and Versatile I/O Panel Experience high-speed connectivity with the USB Type-C (10Gbps) port on the I/O panel, along with USB 3.0 ports and a mic/audio 2-in-1 port. Included dust plugs ensure dust prevention for long-term durability. 4mm Tempered Glass Side Panels for Stunning Showcase Showcase your hardware in style with the 4mm tempered glass side panels, providing a clear view of your components and RGB lighting effects. Efficient Cable Management with Velcro Straps Achieve a clean and clutter-free build with the included velcro straps for easy cable management. Three sets of velcro straps for fan & I/O cable routing ensure a tidy interior for optimal airflow and aesthetics. Enhanced Cooling Performance with Storm T3 PWM Fans Equipped with pre-installed Storm T3 PWM fans, the Antec Performance 1 FT Case ensures efficient cooling and quiet operation. The thicker fan blades and PWM function maintain the perfect balance between cooling performance and silence. Optimized Airflow and Dust Filtration Experience superior GPU cooling with the airflow-enhancing mesh front panel and ample mesh at the bottom with optional fans on the meshed PSU shroud. Magnetic and clip-on dust filters provide hassle-free maintenance and dust prevention. Specifications of Antec Performance 1 FT Black Case : Form Factor: E-ATX Motherboard Support: E-ATX up to 285mm, ATX, Micro ATX, Mini ITX Connectors / Controls: 1 x USB 10Gbps Type-C, 2 x USB 3.0, Audio I/O, Temp. Display Switch Drive Bays: 3 x 2.5", 2/2 x 3.5"/2.5" Drive Mounts Expansion Slots: 8 Expansion Slots Cooling System: Front: 3 x Storm T3 PWM 140mm fans, Rear: 1 x Storm T3 PWM 120mm fan Fan Mounts: Front: 3 x 120 / 3 x 140 mm, Top: 3 x 120 / 3 x 140 mm, Rear: 1 x 120 mm, PSU Shroud: 3 x 120 mm Radiator Options: Front: Up to 420 mm, Top: Up to 360 mm, Rear: 120 mm Material: Steel & Plastic, 4mm Tempered Glass Side Panels Compatibility: GPU max length: 400 mm, CPU cooler max height: 175 mm, PSU max length: 245 mm (with HDD), 440 mm (without HDD) Weight/Dimensions: 12.55 kg, (DxWxH) 552 x 230 x 522 cm Warranty: 2 Years
Technextday.co.uk
Delivery: in United Kingdom
Report
£119.12
5 more offer(s)

Antec Performance 1 FT configurations

Price for Antec Performance 1 FT
Antec Performance 1 FT blackfrom £119.1211 offers
Antec Performance 1 FT whitefrom £119.469 offers
Filters