Antec Flux Pro white (0-761345-10155-4)

Flow Luxury   F-LUX Platform abbreviation of Flow Luxury features ultra case structure design for excellent airflow and 6 fans included delivering enhanced GPU cooling performance.     Flux Airflow Multi-directional vent design featuring extensive air intakes at the bottom power supply ch... moreamber and lower sides along with top vents and large-area mesh at the front creating a dedicated Antec Flux airflow channel.       Flux Vertical Cooling Air intake via the PSU chamber maximizes heat dissipation while enhancing the intake effect for the graphics card.       Flux Horizontal Cooling Air intake via the front mesh provides smooth venting channel throughout the case.         Premium Wood Front panel is crafted with a combination of metal mesh and wood (birch) to create a high-quality texture with different materials integrating seamlessly into your home design.       Innovative iShift PSU 90° Mount In addition to the standard PSU mount orientationa 90-degree rotated option powered by the included extension cable is available. Plug in the cable connector from the right side routing has never been easier. Support 180mm long PSU.         PSU Installation Left side of PSU chamber is detachable making it easy to install the power supply.         CPU/GPU Dual Temperature Display Intuitive hardware temperature display design with 4 different modes: - GPU & CPU On - GPU & CPU Off - Only CPU On - Only GPU On *Antec iUnity software must be installed.       Antec iUnity The Antec iUnity provides instant data on PC specs loads and usage.         Removable Top Cooling Bracket Mount the fans/radiators on the cooling bracket first and install the cooling bracket back to the case.         Removable Cooling Bracket on Top of PSU Shroud When fans (2 available) are installed on the case bottom remove the top shroud bracket to maximize the airflow fulfilling the optimal vertical cooling scheme.         Removable Front Cooling Bracket Vertically adjustable to 5 positions to fit the huge top AIO. Full cut-out design for enhanced air intake. Can install fans or radiators.           Fan & Radiator Support Can only accommodate Top 420mm + Front 360mm radiator or Front 420mm + Top 360mm radiator at the same time.           Support Vertical GPU Mount With Vertical Bracket Fully-open PCI slot covers can be removed to install the graphics

The Antec Flux Pro is a full tower case designed for superior airflow and cooling performance. Featuring a stylish combination of wood and metal mesh on the front panel, it integrates seamlessly into modern home aesthetics. The case supports a wide variety of motherboards, including E-ATX, and boasts extensive cooling capabilities with room for up... moreto 6 pre-installed PWM fans and multiple radiator configurations. With user-friendly features like tool-free panel designs and a modular hard drive cage, the Flux Pro delivers both functionality and elegance for gamers and PC enthusiasts alike. Flux Pro at a Glance Superior Airflow: Multi-directional vent design for optimized cooling performance. Versatile Fan Support: Includes 6 high-performance PWM fans and supports multiple radiator sizes. Elegant Design: Premium wood and metal mesh front panel enhances aesthetic appeal. Easy Cable Management: Tool-free panel design and multiple cable routing options for a clean build. Dual Temperature Display: Intuitive display for monitoring GPU and CPU temperatures. Removable Cooling Bracket: Facilitates easy installation of fans and radiators for maximum airflow. Flux Pro Specification Dimensions 530 x 245 x 545 mm (DWH) Form Factor Full Tower Materials Steel + Plastic + Glass + Wood Mainboard Support E-ATX (≤285mm), ATX, Micro-ATX, ITX Front Access & Controls Power, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1 Side Panel 4mm Tempered Glass Drive Bays 3.5" / 2.5": 4 / 4, 2.5": 2 Expansion Slots 8 Fan Support Front: 3 x 120mm / 3 x 140mm Top: 3 x 120mm / 3 x 140mm Power Supply Shroud: 3 x 120mm Bottom: 2 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Included Fan(s) 3 x 140mm Tranquil PWM fans (front) + 2 x 120mm P12R PWM reverse fans (PSU shroud) + 1 x 140mm Tranquil PWM fan (rear) Radiator Support Front: 120 / 140 / 240 / 280 / 360 / 420mm Top: 120 / 140 / 240 / 280 / 360 / 420mm Power Supply Shroud: 120 / 240 / 360mm Bottom: 120 / 240mm Rear: 120 / 140mm Clearance Max GPU Length: ≤ 455mm Max CPU Cooler Height: ≤ 190mm Max PSU Length (Include cable): ≤ 180 / 300mm (with HDD), ≤ 470mm (without HDD), ≤ 180mm (Side Mount) Miscellaneous Dust Filter: Bottom Net Weight 13.60 Kg Gross Weight 16.65 Kg Warranty 2 Years