ARCTIC P8 Single Fan (ACFAN00147A)

OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P8 is particularly suitable for use on heatsinks and radiators HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achiev... moreed LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life REDESIGNED FAN BLADES: The P8 fan features completely redesigned fan blades and is optimised for high static pressure TECHNICAL DATA: Fan speed: 3000 rpm, Airflow: 23.4 cfm | 40.3 m³/h, Noise Level: 0.3 Sone, Static pressure: 1.9 mmH₂O, Pin: 3-pin

Pressure-optimised 80 mm Fan Optimised For Static Pressure During the development of the new P8, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 is particularly suitable for use on heatsinks and radiators. High Q... moreuality BearingThanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Maximum Quietness, Minimum VibrationEven at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Two Way Installation - Push warm air out of the case - Pull cool air into your case