Colour

Device type	processor-amplifier
Features	concert
Element base	transistor


Amplifier parameters
Number of channels	2
Frequency range	20 – 20000 Hz / - 1 дБ /
Power per channel (8Ω)	275 W / in bridge mode — 1000 W /
Power per channel (4Ω)	500 W / in bridge mode — 1400 W /
Power per channel (2Ω)	700 W
Signal-to-noise ratio (Main)	100 dB
Damping factor	500
Harmonic distortion	0.5 %


Channel sensitivity / impedance
Main input	1.4 В 20 kOhm


Connectors
To amplifier (Main)	XLR
Outputs	Speakon
For acoustics	2 шт
XLR (balanced)	2 шт

Front panel	display indicators


Features
Adjustments	bass control / Subharmonic Synth / treble adjustment / Subharmonic Synth / input sensitivity adjustment / Subharmonic Synth / level adjustment
More features	By-pass/Direct limiter / Peakx Plus /


General
PSU	internal
Power consumption	1200 W
Standby consumption	1 W
Mount size	2U
Dimensions (WxDxH)	483x311x89 mm
Weight	8.4 kg
Added to E-Catalog	January 2016

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Crown 2026 - new arrivals, bestsellers, and the most relevant models Crown.

Buy Crown XTi1002

When you make a purchase through links on our site, we may receive a affiliate commission.


	Crown XTi1002 Power Amp CRO0276 Create your sound. Shape your sound. Make every show unforgettable with a Crown XTi1002 Power Amp. Expect the best sound qual... moreity receive all that and more. Getting a great sound couldnt be easier with Peakx Plus™ limiting three fan settings 500 watts of output power easy to use control software an enhanced sub harmonic synth section and enough presets to quickly adapt to any room. Get the crowds moving. The Subharmonic Synth section makes it easy to add robust and dynamic bass to any live set. When you need an extra thump to get the audiences attention the Crown XTi1002 has got you covered. Gear4Music.com Delivery: in United Kingdom Report	£528.00 Buy in shop

	Stereo Power: 500W @ 4 Ohms NXTI1002-U-UK Crown Extended Warranty to 6 Years Crown’s XTi family of amplifiers defines the standard for portable PA systems wit... moreh unmatched performance technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series you’re choosing one of the most powerful and efficient amplifiers on the market today. Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) A-weighted 100 dB (103 dB in XTi 6000) Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi 1000: 6.8A XTi 2000: 8.3A XTi 4000: 10.5A; at idle draws no more than 30 watts. XTi 6000: 15.3A; at idle draws no more than 180 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Stereo Bridge mono 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) Voltage Gain (at 1 kHz 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB. Maximum Input Signal +22 dBu typical Operating Temperature 0? C to 40? C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (? 10%) 100V 120V 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width Height Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D Net Weight Shipping Weight 18.5 lb (8.4 kg) 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg) 30.0 lb (13.6 kg) - Features - Type Power Amplifier - Power Output 500 - Weight 8.4 Kg - Dimensions W x D x H 482 x 311.15 x 88.9 mm - Warranty 6 years warranty Quzo.co.uk Delivery: to United Kingdom Report	£578.66 Buy in shop

	CROWN XTi 1002 NXTI1002-U-UK CROWN XTi 1002 LaptopHub.uk Delivery: in United Kingdom Report	£600.23 Buy in shop

	CROWN XTi 1002 CROWN XTi 1002 Crown Extended Warranty to 6 YearsCrown’s XTi family of amplifiers defines the standard for portable PA... moresystems with unmatched performance technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series you’re choosing one of the most powerful and efficient amplifiers on the market today.Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) A-weighted 100 dB (103 dB in XTi 6000) Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi 1000: 6.8A XTi 2000: 8.3A XTi 4000: 10.5A; at idle draws no more than 30 watts. XTi 6000: 15.3A; at idle draws no more than 180 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced 10 kilohms unbalanced Load impedance (note: safe with all types of loads)StereoBridge mono 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) Voltage Gain (at 1 kHz 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB. Maximum Input Signal +22 dBu typical Operating Temperature 0? C to 40? C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (? 10%) 100V 120V 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width Height Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D Net Weight Shipping Weight 18.5 lb (8.4 kg) 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg) 30.0 lb (13.6 kg)FeaturesTypePower Amplifier Power Output500 Weight8.4 KgDimensions W x D x H482 x 311.15 x 88.9 mmWarranty3 Years Pcnova.co.uk Delivery: in United Kingdom Report	£600.23 Buy in shop

	CROWN XTi 1002 NXTI1002-U-UK Crown Extended Warranty to 6 YearsCrown’s XTi family of amplifiers defines the standard for portable PA systems with un... morematched performance technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series you’re choosing one of the most powerful and efficient amplifiers on the market today.Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) A-weighted 100 dB (103 dB in XTi 6000) Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi 1000: 6.8A XTi 2000: 8.3A XTi 4000: 10.5A; at idle draws no more than 30 watts. XTi 6000: 15.3A; at idle draws no more than 180 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced 10 kilohms unbalanced Load impedance (note: safe with all types of loads)StereoBridge mono 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) Voltage Gain (at 1 kHz 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB. Maximum Input Signal +22 dBu typical Operating Temperature 0? C to 40? C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (? 10%) 100V 120V 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width Height Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D Net Weight Shipping Weight 18.5 lb (8.4 kg) 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg) 30.0 lb (13.6 kg)FeaturesTypePower Amplifier Power Output500 Weight8.4 KgDimensions W x D x H482 x 311.15 x 88.9 mmWarranty3 Years CROWN XTi 1002 Gamingkit.co.uk Delivery: in United Kingdom Report	£612.23 Buy in shop

Series Crown XTi (power with processor)Compare using chart →

Crown XTi2002

from £760.00

processor-amplifier, concert, channels: 2, per channel 8Ω 475 W, per channel 4Ω 800 W, dumping: 500, inputs: Main XLR, Gain Control

compare

Crown XTi4002

from £1,196.02

processor-amplifier, concert, channels: 2, per channel 8Ω 650 W, per channel 4Ω 1200 W, dumping: 500, inputs: Main XLR, Gain Control

compare

Crown XTi6002

from £2,362.40

processor-amplifier, concert, channels: 2, per channel 8Ω 1200 W, per channel 4Ω 2100 W, dumping: 500, inputs: Main XLR, Gain Control

compare

Crown XTi1002

from £528.00

processor-amplifier, concert, channels: 2, per channel 8Ω 275 W, per channel 4Ω 500 W, dumping: 500, inputs: Main XLR, Gain Control

compare

Crown XTi1002 configurations


Crown XTi1002	from £528.00	5 offers
Crown XTi2002	from £760.00	2 offers
Crown XTi4002	from £1,196.02	1 offer
Crown XTi6002	from £2,362.40	1 offer

Video reviews

Additional features amplifier Crown XTi1002:

Built-in Subharmonic Synth with a set of factory presets and the ability to select the operating frequency, filter type and gain
USB connector (type B) for controlling the amplifier from a computer

Crown XTi1002

Buy Crown XTi1002

Crown XTi1002 Power Amp CRO0276

Stereo Power: 500W @ 4 Ohms NXTI1002-U-UK

CROWN XTi 1002 NXTI1002-U-UK

CROWN XTi 1002

CROWN XTi 1002 NXTI1002-U-UK

Crown XTi1002 configurations