DeWALT DCN692P2

Dewalt DCN692P2 18V XR Brushless 2 Speed Framing Nailer(2 x 5.0Ah Batteries)The  DCN692P2 is an extremely versatile Dewalt 1st fix nail gun. Its brushless motor technology offers the power to fire a 90mm ring shank nail in softwood and 63mm into hardwoods. You can expect longer runtime, quicker readiness to fire, less recoil and more durability whe... moren firing short nails. The two-speed settings optimise the nailer for firing all lengths of nails and it's mechanical rather than gas operation ensures consistent performance. Features: - Tool-free stall/jam clearance minimises user downtime - Gas free operation offers a significant saving in running costs - Depths can be easily adjusted using the thumb wheel depth adjuster - Class-leading vibration and sound figures offer fantastic user protection - Two speeds - or power levels - to optimise the nailer for firing all lengths of nails - Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud - User can engage contact trip lock-off and prevent accidental dis-charge of fastener - Reversible belt/rafter hook provides increased portability and versatility on the job-site - Dry fire lockout ensures that the tool is protected from firing without nails in the magazine - Cordless design allows you to work without the inconvenience and safety risk of trailing leads - Increased visibility and durability along with protection for work-surface from the non-mar contact-trip - Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails - BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods - The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed - High capacity 5.0Ah XR battery packs offer eXtreme Runtime in both speeds and versatility to share power with your other 18V XR power tools - Versatile 30 - 34-degree magazine angle will accept most clipped head, and off-centre round head paper tape or wire weld collated framing nails - Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees Celcius and minimal cleaning/service requirementsComes with: - Non-mar tip - Reversible belt hook - Multi-voltage XR charger - Heavy-duty carrying case - 2x 5.0Ah XR Li-Ion battery packs with state of charge indicatorSpecification: - Weight: 4.1 kg - Width: 125mm - Height: 338mm - Length: 345mm - Jam Clearing: Yes - Fault indicator: Yes - Impact energy: 105 J - Nail Length: 50 - 90mm - Magazine angle: 30 - 34° - Integrated Belt Hook: Yes - Nail Diameter: 2.8 - 3.3mm - Magazine loading: Rear-load - Temperature Range: -20 to 50°C - Firing mode: Bump & Sequential - Nailer Operating Mode: Selective - Magazine capacity: Up to 55 Nails

The DeWalt DCN692 18v XR 90mm Framing Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its brushless motor delivers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operat... moreing mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specifications • Battery chemistry: XR Li-Ion • Voltage: 18v • Nail Diameter: 2.8 - 3.3 mm • Magazine angle: 30 - 34 ° • Magazine loading: Rear - load • Nail Length: 50 - 90 mm • Magazine capacity: Up to 55 Nails • Trigger Type: Bump & Sequential • Length: 345 mm • Width: 125 mm • Height: 338 mm • Weight: 4.1 kg • Nailer Operating Mode: Selective • Integrated Belt Hook: Yes • Jam Clearing: Yes • Temperature Range: -20 to 50°C • Fault indicator: YesFeatures & Benefits• 18v XR Li-Ion Two Speed Framing Nailer • Brushless motor for increased runtime • Two speeds - or power levels - to optimise the nailer for all lengths of nails • Quicker readiness to fire, less recoil and more durability when firing short nails • Delivers enough power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods • Sequential operating mode allows for precision placement • Bump operating mode provides the user with production speed • Mechanical operation offers consistant performance between -20 and 50 degrees celcius • Minimal cleaning/service requirements • Class leading vibration and sound figures • Versatile 30 - 34 degree magazine angle • Accepts most clipped head, and off centre round head paper tape or wire weld collated framing nails • Reversable belt/rafter hook povides increased portability and versatility on the job-site • Depths can be easily adjusted using the thumb wheel depth adjuster • Non-marring contact tip prevents unintentional damage to workpiece • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud • Gas free