Kingston KSM MR SO-DIMM DDR4 1x16Gb KSM32SED8/16MR

Kingston´s KSM32SED8/16MR is a 2G x 72.-bit (16GB) DDR4.-3200 CL22 SDRAM (Synchronous DRAM) w/ parity, 2Rx8, ECC, memory module, based on eighteen 1G x 8.-bit FBGA components.The SPD is programmed to JEDEC standard latency DDR4.-3200 timing of 22.-22.-22 at 1.2V.Each 260.-pin SODIMM uses gold contact fingers.Specifications:- Power Supply:- Vdd:1.2v... more.- Vddq:1.2v.- Vpp:2.5v.- Vddspd:2.20v To 3.60v.- Functionality And Operations Comply With The Ddr4 Sdram Datasheet.- 16 Internal Banks.- Bank Grouping Is Applied, And Cas To Cas Latency (Tccd_L, Tccd_S) For The Banks In The Same Or Different Bank Group Accesses Are Available.- Data Transfer Rates:Pc4.-3200, Pc4.-2933, Pc4.-2666, Pc4.-2400, Pc4.-2133, Pc4.-1866, Pc4.-1600.- Bi.-Directional Differential Data Strobe.- 8 Bit Pre.-Fetch.- Burst Length (Bl) Switch On.-The.-Fly Bl8 Or Bc4(Burst Chop).- Supports Ecc Error Correction And Detection.- On.-Die Termination (Odt).- Temperature Sensor With Integrated Spd.- This Product Is In Compliance With The Rohs Directive. - Per Dram Addressability Is Supported.- Internal Vref Dq Level Generation Is Available.- Write Crc Is Supported At All Speed Grades.- Ca Parity (Command/Address Parity) Mode Is Supported.- Rohs Compliant And Halogen.-Free.- Cl(Idd):22 Cycles.- Row Cycle Time (Trcmin):45ns(Min.).- Refresh To Active/Refresh Command Time (Trfcmin):350ns(Min.).- Row Active Time (Trasmin):32ns(Min.).- Ul Rating:94 V.- 0.- Operating Temperature:0 C To +85 C.- Storage Temperature:-55 C To +100 C

DDR4 RAM / Memory Capacity 16 GB / Memory Kit Type 1 x 16 GB / Bus Clock Speed 3,200 MHz / Specification PC4-25.600 / Memory Latency CL 22-22-22 / Voltage 1.2 V / Design SO-DIMM / Height 30 mm