LANCOM LX-6400

Wi-fi is omnipresent today, whether in office environments, schools, universities, shopping centres, sports stadiums or event locations. by using the lancom lx-6400 you get an excellent wi-fi experience. this wi-fi 6 access point offers low latency and high throughput per client even with high terminal device density. you can therefore trust the ca... morepabilities of high efficiency wireless – made by lancom.Features:- Dual concurrent Wi-Fi – parallel operation at 2.4 GHz and 5 GHz with Wi-Fi 6 (IEEE 802.11ax)- 4x4 multi-user MIMO for simultaneous beam-steering for multiple clients in down- an uplink mode- OFDMA for efficient Wi-Fi channel usage- Significantly longer battery life thanks to TWT- Support of the security standard WPA3- 8 integrated 180° antennas- Automated operation via the LANCOM Management Cloud (LMC)- Power supply optionally by Power over Ethernet (IEEE 802.3at) or power-supply unit (included)- 1x 2.5-Gigabit Ethernet PoE port ( IEEE 802.3at for up to 30 Watt), 1x Gigabit Ethernet port- Wlan controller support (coming soon: including layer-3 tunneling)Advantages:Explanation video Wi-Fi 6:- More throughput, lower latency. What exactly do these key words behind the new WLAN standard Wi-Fi 6 signify- How you can benefit from the new technology with the ax-enabled LANCOM devices is shown in our ´´Wi-Fi 6 VideoThe superiority of Wi-Fi 6:- Wi-Fi 6 offers many advantages over Wi-Fi 5! The LANCOM whitepaper illustrates this by illustrating the superiority of a WLAN infrastructure based on 2x2 MIMO Wi-Fi 6 access points over an installation with 3x3 MIMO access points with Wi-Fi 5. The document can help you select the WLAN infrastructure that is right for you.Dual concurrent Wi-Fi with an aggregated datarate of up to 3,550 Mbps:- The LANCOM LX-6400 offers the Wi-Fi 6 standard (IEEE 802.11ax) for high-speed wireless LAN for clients in the 2.4- and 5-GHz bands. Wi-Fi 6 technology achieves transmission rates of up to 2.400 Mbps at 5 GHz and simultaneously up to 1.150 Mbps at 2.4 GHz.4x4 Multi-User MIMO for downlinks and uplinks:- Multi-user MIMO (MU-MIMO for short) simultaneously distributes all of the available spatial streams of the LANCOM LX-6400 between several different Wave 2 clients, rather than one after the other as was formerly the case. The available bandwidth is used efficiently and delays in the wireless network are substantially reduced. With Wi-Fi 6, MU-MIMO operates not only for the downlink but for the uplink as well.OFDMA – carpooling in the radio field:- Orthogonal Frequency Division Multiple Access (OFDMA) divides the frequency range of a Wi-Fi channel into a number of frequency blocks per unit of time. This creates subcarriers, which can be as narrow as just 2 MHz. Small data packets, so typical of IoT devices, no longer block entire 20-, 40- or even 80-MHz channels all by themselves. On the other hand, the Wi-Fi 6 access point is able to bundle multiple subcarriers. This is bit like carpooling, which stops the

Data transmissionEthernet LAN data rates10,100,1000,2500 Mbit/sMaximum data transfer rate3550 Mbit/sPerformance2.4 GHzYes5 GHzYesCountry of originMalaysiaFirmware upgradeableYesSpread spectrum methodOFDMANumber of users511 user(s)VLAN supportYesQuality of Service (QoS) supportYesNetworking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 8... more02.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11v, IEEE 802.1x, IEEE 802.3at, IEEE 802.3azEthernet LAN data r