The information in the model description is for reference purposes. Always clarify the specifications and configuration of the product with the online store manager before purchasing. Catalog NETGEAR 2025 - new arrivals, bestsellers, and the most relevant models NETGEAR.
When you make a purchase through links on our site, we may receive a affiliate commission.
NETGEAR 10 Port 10GB Switch MS510TXPP Smart Managed Multi-Gigabit PoE Switch 8x PoE at 180 W 1 x 10G 1 x 10G SFP Desktop or
4 x 1G, 2 x 1G/2.5G, 2 x 1G/2.5G/5G, and 1 x 10G Ethernet ports
8 PoE+ ports with 180 W total power budget
1 x 10G SFP+ por... moret
Smart software with easy-to-use interface offers managed control for secure setup, access, and SNMP (NMS 300) management
Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box
Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR expert
Energy efficient design compliant with IEEE802.3az
Quiet operation
Netgear NETGEAR MS510TXPP Managed L2/L3/L4 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) Grey MS510TXPP-100EUS
Managed L2/L3/L4 Web-based management Quality of Service (QoS) support Basic switching RJ-45 Ethernet ports quantity: 8 Conso... morele port: RJ-45 MAC address table: 16000 entries Switching capacity: 78 Gbit/s 164 Access Control List (ACL) Rack mounting AC Power over Ethernet (PoE) Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deploymentsBusinesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle. Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core. Management features ARP inspection Yes Web-based management Yes Quality of Service (QoS) support Yes Switch layer L2/L3/L4 Switch type Managed Ports & interfaces Power connector DC-in jack USB 2.0 ports quantity 1 Console port RJ-45 SFP+ module slots quantity 1 10G Ethernet (copper) ports quantity 1 2.5G Ethernet (copper) ports quantity 2 Gigabit Ethernet (copper) ports quantity 4 Basic switching RJ-45 Ethernet ports type 10G Ethernet (100/1000/10000) Basic switching RJ-45 Ethernet ports quantity 8 Network Number of VLANs 256 VLAN support Yes Link aggregation Yes Flow control support Yes Auto-negotiation Yes Broadcast storm control Yes Spanning tree protocol Yes Half duplex Yes Full duplex Yes 10G support No Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z Data transmission Packet buffer memory 3 MB Jumbo frames 10000 Jumbo frames support Yes Number of static routes 32 Static route Yes Latency (10 Gbps) 2.36 µs Switching capacity 78 Gbit/s MAC address
NETGEAR MS510TXPP Managed L2/L3/L4 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) Grey MS510TXPP-100EUS
Introducing a new Gigabit Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deployments
Business... morees need to be ready for future expansion: with incoming new multispeed devices their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers workstations storage devices and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.
That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit the MS510TX and MS510TXPP give the exact speed required with no downgrade. Also the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables without the need to upgrade to CAT6 wiring therefore reducing wiring costs and hassle.
Access Aggregation or Collapsed Core: You can now have your PCs printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch all line-rate. 10G copper and fiber ports are ready for local servers and storage or high-speed aggregation to your network core.
Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to... moreregular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the switch gives the exact speed required, with no downgrade. Also, the NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle. Access, aggregation or collapsed core: you can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.
