Comparison Casio G-Shock GST-B400-1A vs Casio G-Shock GST-B100-1A

A caliber can be described as the type of movement used in a watch. It is expensive and impractical to design a unique movement for each watch model, so most manufacturers often use the same movement in different watch models, sometimes with significantly different designs. The term "caliber" is due to the fact that initially the type of movement was designated by a number (in inch lines) corresponding to its largest size; however, today unique names or alphanumeric indices that are not directly related to sizes are widely used.

Knowing the name of the caliber on which the watch you are interested in is built, you can, if desired, find more detailed information about the mechanism and determine how its characteristics meet your requirements.

The watch has a separate second hand. Note that the location and features of the operation of such an arrow may be different. So, in some watches it is installed on the same axis with the rest of the hands, in others a separate small dial is provided for counting seconds. On some models, the second hand is part of the chronograph (see Features/Features) and only moves when the chronograph is on.

The amount of time that the watch is able to operate normally without winding the spring or changing/recharging the battery (for more details, see "Power source"). Modern mechanical watches (see “Movement type”) have a standard power reserve of 40+/-5 hours. However, this parameter is usually indicated for the simplest mode of operation, without the use of additional functions such as a chronograph(see “Functions / Capabilities” ), which also “eat up” the plant. Thus, such a watch is supposed to be wound every day, but nothing will happen if you miss the usual time and remember to wind it a few hours later than usual.

In turn, for quartz watches, the power reserve is often not indicated in the specifications. This is due to the fact that this parameter, firstly, is quite large compared to mechanical models (it would be measured in tens of days rather than hours), and secondly, it strongly depends on a number of external factors (for example, the quality of the next batteries). Therefore, it is very difficult, if not impossible, to reliably determine the power reserve in such cases.

— Arrow. A classic-looking dial with divisions to indicate the time and at least two hands — hour and minute — moving in a circle. This option limits the ability to display additional information and any additional function significantly complicates the design, but this classic allows you to make watches in any design, which is so appreciated.

— Digital. As the name implies, the time in such a watch is displayed by numbers, while the role of the dial itself is played by a liquid crystal screen. It is this type of watch that is commonly called "electronic". LCD screens are much more convenient for displaying additional information than arrow dials, they provide more options (for example, a stopwatch can easily count tenths and even hundredths of a second).

— Mixed. An option that combines both of the above types. Usually it is an arrow dial, supplemented by a small LCD screen. Thus, in one model, the advantages of both types of dials are combined — the visibility of the arrows and the versatility of the screen. Watches of this type can only be quartz.

— LED. In fact, it is a variation of the digital dials described above, in which LED screens are used instead of LCD matrices. The key feature of such watches is that they are, by definition, backlit — in the sense that the image itself glows. In addition, the colour of the image may vary, and many o...f these models have a bright and unusual appearance. On the other hand, such dials consume more energy than traditional liquid crystal ones, which consequently affects battery life. In some models, this moment is partly offset by the fact that the screen does not work all the time, but turns on for a few seconds at the touch of a button; however, this also creates certain inconveniences — in order to find out the time, you have to make extra movements.

— Disk. A rather unusual type of dials based on the use of rotating disks with numbers printed on them. There are virtually no arrows in the disk dials, their role is played by special windows in which the readings of a particular disk are displayed. Such watches differ in their original appearance, but in terms of convenience they are still somewhat inferior to traditional watch models (especially since the second hand — or rather, the disk — is usually not provided for in their design). Thus, this option has not received much distribution.

A function found in models with mixed dials (see the relevant paragraph) or additional scales. One of the disadvantages of such models is that in a certain position, the hands can cover the screens or scales, making it difficult to read the information on them. For such cases, the function of moving the hands is provided: at the user's command, the hands move to a position in which they do not cover additional elements of the dial. Also, on command, the arrows can be returned “to their place”; in addition, in some models, the return occurs automatically after a certain time.

— Alarm clock. A classic alarm clock is an audible signal that works at a time specified by the user. It can be used not only for getting up, but also as a reminder of a particular event. Note that in mechanical models (see "Type of mechanism") this function is almost never found.

— Stopwatch. A traditional stopwatch is a function that allows you to measure time intervals with an accuracy of seconds, or even fractions of a second. In modern watches, you can find two types of stopwatches. The first is the solutions used in models with displays (in other words, in watches with electronic and combined dials). In such devices, the countdown of seconds is displayed on the screen and is accurate to a tenth or even a hundredth of a second; Also, such stopwatches can have various additional functions: counting intermediate results for control points or laps, saving the results of the last measurement, etc.
The second type of stopwatch found in the arrow dials is the arrow on the main axis, which can be started and stopped at the request of the user. This is a rather rare option — for the reason that most often such an arrow is used in combination with additional scales and is no longer a stopwatch, but a chronograph (see below). And in watches where there are no chronograph scales, a rather unusual format for the operation of such a hand can be provided: in normal mode, it works like a standard second,...and when the watch is switched to stopwatch mode, it moves to zero and stops before the countdown begins.

— Timer. Countdown function; at the end of the countdown, an audible signal sounds. This function is convenient in cases where you need to measure a strictly defined period of time — for example, when cooking in the kitchen: “starting” the timer for the desired period is much more convenient than counting the hour you need to set the alarm.

— Day of the week. Ability to display the day of the week on the watch face. It is found both in watches with displays and in purely analogue models — they use a mechanical indicator for 7 days.

— Day of the month. The ability to display the current day of the month on the clock face. It can be either a number on the display or a mechanical indicator in the form of a window with a number. Note that in the latter case, regular adjustment of the calendar is required: the mechanical pointer is designed for 31 days, and if there are less than 31 days in the past month, the displayed date will have to be “scrolled” forward.

— Month of the year. Ability to display the current month on the watch face. Usually, it is combined with an indicator of the day of the month, and often also the day of the week; thus, the presence of this pointer means that the watch is equipped with a full-fledged calendar. Most often, the display is responsible for this function, but there are also purely arrow models with similar equipment. The month indicator of the year is often synchronized with the day indicator — so that the watch itself determines how many days are in the current month and after which day you need to switch to the first number.

— World time. The ability to use the clock to determine the time in other time zones than the current one. The specific way in which such a function is implemented may vary. Thus, the most popular option in hand models (see "Dial type") is the presence of an additional dial, on which the time of the time zone of interest is set. This format is convenient in cases where you constantly have to deal with a certain region — for example, to communicate with relatives or business partners from a particular country. Another option is the indexes on the rotating bezel (see below), corresponding to the main time zones of the world; to determine the world time, you need to turn the bezel so that the current time zone is opposite the hour hand — then the remaining marks will be opposite those divisions of the dial that correspond to the time in these time zones. This format is convenient for frequent change of time zones — in particular, it is found in watches for sailors. And models with digital dials usually provide switching the screen between the current and additional time zone (zones).


— 12/24 hour time format. This feature is indicated only for watches with pointer dials (and certain pointer-electronic models, see "Dial type"). It means that in addition to the main 12-hour scale, the watch also has a small dial with 24-hour markings. It allows you to determine what time the main scale shows — before or after noon: for example, at 6 pm the main dial will indicate 6 o'clock, the additional one — at 18 o'clock. — for example, in the conditions of a polar day / night, or during a long stay underground.
As for watches with electronic dials, even the 12-hour format is supplemented with the note "AM" or "PM" ("am" and "pm" respectively); for example, 20:00 would be 8:00 PM. So in such models there is simply no need to provide special functions for determining the time of day.

— The phases of the moon. The presence of an indicator in the watch that displays the current phase of the moon. Many processes on Earth depend on the phases of the Moon (in particular, the general physical and mental state of people), a number of signs are associated with them — not always 100% reliable, but not having an unequivocal refutation. A separate category of watches with a lunar calendar — "fishing" and "seafaring" models; the latter may even provide a separate tide calendar.

— Chronograph. Analogue of a stopwatch used in watches with pointer dials (see "Dial type"). Such watches have several additional small scales, each of which performs its own function. For example, one of these scales can be responsible for counting minutes (up to half an hour), the second — for counting hours (up to 12 hours), the third is the usual second hand, and the hand for counting seconds is located on the central axis and remains stationary until the chronograph is turned on.

— Tachymeter. A device for measuring the speed of movement by the time during which the measured section was passed. The tachymeter most often has the form of an additional scale for a stopwatch, and to measure the speed, you need to measure the time it takes to pass the control section with a stopwatch and see what number on the tachymeter scale the stopped arrow points to. In this case, the measurement time should not exceed a minute (otherwise the arrow will go to the second circle, and the readings will be unreliable), and additional calculations may be required to determine the final result. However, anyway, it is much more convenient to use tachymeter data to determine speed than stopwatch readings.

— Slide rule. Built-in mechanical calculator for some simple mathematical calculations, primarily multiplication and division. Such a device can be useful, in particular, for calculating travel time, fuel consumption, transferring money from one currency to another, etc. In hours, a slide rule usually consists of two rings with divisions (hence the second name for this function is a calculator ring ). One of these rings is motionless, and the second rotates freely; combining the marks on both scales according to certain rules, the user gets the desired result. Note that the slide rule is not as accurate as an electronic calculator and is more difficult to handle; on the other hand, with a minimum skill, elementary calculations on it can be carried out much faster than on the same calculator.

— Compass. A traditional compass is a device for determining cardinal directions. The accuracy of built-in compasses is usually not high, but they can be very useful for simple tasks or as a last resort when other navigational devices are not available.

— Altimeter (altimeter). A device for measuring the current height of the terrain. Often combined with a barometer (see below), in such cases the difference in pressure between the reference level and the current location is used to measure altitude. Technically, in this way it is possible to measure the height both above sea level and relative to a certain place taken as a standard; actual altimeter capabilities vary by watch model. Watches with this function are designed primarily for climbers and mountain hikers.

— Thermometer. Thermometers in watches are usually designed to measure the temperature of the surrounding air. This feature is found mainly in advanced sports models. It can be useful both for a general assessment of the environment, and for specific tasks such as weather forecasting, calculating the current altitude, etc.

— Barometer. A device for measuring atmospheric pressure. Data from the barometer allows you to assess the weather conditions and their favorableness for a certain type of activity — in particular, fishing. In addition, they can be used to predict changes in the weather: for example, a sharp drop in pressure is often a sign of an approaching storm. Also, the operation of the altimeter (see above) is often based precisely on the readings of the barometer.

— Bluetooth. The Bluetooth wireless interface is designed to communicate between various electronic devices over relatively short distances — up to 10 m. In wristwatches, it is mainly used to communicate with a smartphone or other gadget. The functionality of such a connection may be different, but anyway, it is much narrower than in smartwatches. The most popular features include displaying notifications from Facebook and/or Twitter on the watch, using the watch as a remote control for music or video, as well as setting the world time (determining the time zone from data from an external device).

— GPS module. Built-in satellite navigation module that allows you to determine the current geographic coordinates of the device. How this data is used may vary depending on the watch model. So, in some models, data on time zones in different countries are sewn in, and based on the current coordinates, the device can determine the exact local time. Another option is to record the routes (tracks) traveled. Some watches use GPS data for altimeter operation (see related paragraph). Models with Bluetooth may provide the ability to work as an external sensor for a smartphone or other gadget (it is believed that the hand position of the sensor improves accuracy). But it is difficult to provide full-fledged navigation in traditional watches; wearable gadgets with such functionality usually refer to either smartwatches or specialized navigators.

— Synchronization by radio channel. This function allows the watch to receive special time radio signals. These signals are transmitted over a special dedicated channel several times a day, and the exact time data is received from atomic chronometers used in scientific institutes. The error of such chronometers is 1 second for several thousand or even millions of years; accordingly, the accuracy of the clock synchronized with them is almost absolute. At the same time, note that precise time radio signals are not available in all countries of the world — so before buying such a watch, it's ok to check whether they will work in your region.

— Chronometer. In this case, the designation "chronometer" is used for high-precision models that are certified by the Swiss Chronometer Certification Centre (COSC). To obtain such a certificate, a watch must pass a fairly rigorous test, checking not only for overall accuracy, but also for the ability to maintain it with changes in case position and ambient temperature. At the same time, it should be noted that in fact "chronometric" accuracy is required extremely rarely, and it affects the cost of watches quite noticeably. So compliance with the COSC requirements is not so much a practically significant moment as an indicator of the high class of watches and the status of their owner.

— Pedometer. Built-in counter of the number of steps taken by the user. This feature is found predominantly on sport touring models equipped with Bluetooth (see above) and digital or combination watch faces (see "Dial Type"). To count steps, usually, data from the built-in accelerometer is used, and the measurement results can at least be transmitted to a smartphone or other gadget, and in some models they can also be displayed on their own screen. However, it's ok to clarify the specific features of the functionality of a watch with a pedometer separately.

— Phone search. Feature exclusive to Bluetooth models (see above). In accordance with the name, it facilitates the search for a “lost” phone located in close proximity (for example, forgotten in one of the home rooms): just give a command from the clock and the device will “respond” with a sound signal. Usually, to use this function, you need to install a special application (other additional functions are usually implemented through it, if available — for example, a pedometer).

— Brass. Inexpensive material used mainly in watches of the corresponding price category. The composition is an alloy based on copper and zinc. Brass bodies have a pleasant golden colour, but their resistance to corrosion is usually very low. Because of this, such watches darken very quickly, and oxides can stain the wearer's skin and even lead to irritation. To correct the situation, various protective coatings, stainless steel covers, etc. can be used; however, even these measures are not able to completely eliminate this drawback.

— Stainless steel. Inexpensive and at the same time very practical material found in watches of all price categories. "Stainless steel" looks good, perfectly resists corrosion and scratches, retains its presentation for a long time and does not cause allergies. However it has a rather large weight, but for many users, the massiveness of the watch is an advantage, not a disadvantage.

— Titan. Premium material used in watches of the corresponding price level. Titanium alloys combine lightness and high strength, in addition, they are less thermally conductive than steel, due to which they do not “cool” the hand. They are practically not subject to corrosion, do not require protective coatings and are hypoallergenic. On the other hand, such cases are quite sensitive to scratches.

— Plastic. Common features of all types o...f plastic are ease of processing, relatively low cost, low weight, hypoallergenicity, moisture resistance and poor thermal conductivity. For a number of reasons, this material is considered optimal primarily for sports watches, including “diving” (waterproof) watches. At the same time, it should be noted that many types of plastic are used in modern watches, including high-strength varieties that are not inferior in reliability to steel. Therefore, this material is found in all price categories, from low-cost to top; The quality of the case is usually directly related to the cost of the watch.

— Aluminium. "Watch metal", considered a little more advanced than stainless steel. The aluminium alloy is also durable, resistant to corrosion and scratches, and has a solid appearance. At the same time, on the one hand, it is noticeably lighter, on the other hand, it is more expensive.

— Copper. By itself, copper has a pleasant reddish-brown tint, but it does not tolerate prolonged contact with the skin — the surface begins to oxidize, which leads not only to skin contamination, but also to irritation. Therefore, this material is usually used in combination with protective coatings. In fact, it has no advantages over the same "stainless steel", and therefore it is used quite rarely — and not so much for practical or even aesthetic reasons, but in order to distinguish watches from other models.

— Carbon. Composite material, in fact, is high-quality plastic: carbon fiber strands filled with polymer filler. Carbon is notable for its combination of low weight with very high strength; in general, it surpasses even steel in reliability; at the same time, it has many advantages of plastic, such as moisture resistance and low thermal conductivity. The disadvantage of such housings, in addition to high cost, is sensitivity to point impacts.

— Ceramics. Ceramics are various materials obtained by sintering and firing at high temperatures. Watch cases are usually made of high-quality ceramics, which are distinguished by their solid appearance and very high scratch resistance, and they cost accordingly. At the same time, they are quite sensitive to shocks, so a ceramic case is often combined with a stainless steel or other metal back cover.

— Gold. The case is made of jeweler's gold or has a gold-plated finish. Note that the colour of such a case can be different: in addition to the classic yellow, there are also white and red gold. Anyway, such watches are very expensive, and look accordingly; they are designed mainly for those who need not so much a device for determining the time as a rich fashion accessory.

— Silver. Although cases made of silver jewelry are much cheaper than gold ones, this material still belongs to the status ones, and is used not so much for practical reasons, but as a symbol of the high cost of watches and the wealth of their owner. However, for a number of reasons, silver has not received much popularity in watches.

— Wolfram. Tungsten alloys are not cheap, but they are very strong and reliable, and also look stylish. Another feature of this material is its very high melting point; from the practical point of view, this point is not significant, but it is important as a fashion detail, emphasizing the high reliability of tungsten. At the same time, for a number of reasons, such alloys are not widely used in watches.

— Bronze. Quite a rare and specific option, used similarly to copper — in order to give the watch a stylish look. The basis of bronze, in fact, is copper, and tin is most often added to this alloy, but other components can also be used. Accordingly, the colour of such material can be different — yellowish, reddish, brown.

A safety plate in the area of the crown ensures that this weak spot is protected from damage and leaks. The crown protection systems are the guarantors of shock resistance and water resistance of watches.

The material from which the bracelet/watch strap is made. Note that the division into bracelets and straps is rather arbitrary, the basis for it is precisely the material. In modern watches, there may be such options:

— Nylon strap. Nylon is a synthetic material that has a characteristic structure in the form of interwoven threads in watch straps. In most cases, these threads are quite large, due to which the nylon straps are similar in appearance and texture to the ties of tourist backpacks; this option is typical for sports watches. However, there is another variety — finely woven nylon, which is used mainly in women's watches (see "Gender"). Of the practical properties of this material, it is worth noting, first of all, unpretentiousness and resistance to water, including salty; in addition, it can be given almost any colour, and the combination of multi-coloured fibers allows you to create original and bright straps.

— Rubber strap. In this case, rubbers mean elastic materials that, in terms of properties, are a cross between plastic and rubber. Rubber is denser, harder and stronger than rubber, while noticeably softer and more flexible than plastic, which allows it to be used for watch straps. Of the advantages of this option, it is worth noting, first of all, high wear resistance and moisture resistance, which, combined with the appearance features, makes these straps a good option f...or watches in a sporty design. But among the classic models, rubber is usually used in inexpensive watches and has rather modest characteristics.

— Leather strap. Genuine leather straps are typical for quite expensive watches: this material is expensive, while it has a solid and rich appearance. In addition, it is notable for its high strength, moisture resistance and durability. Of the shortcomings of the skin, in addition to the price, it is worth noting a certain tendency to scratches, as well as increased care requirements — otherwise the product may lose its “presentation”.

— Leatherette strap. As the name suggests, leatherettes were created as an alternative to real leather. Their main advantage is a relatively low price: being practically indistinguishable from a leather bracelet, such a bracelet will cost much less. On the other hand, this material is less durable, wears out rather quickly and is generally not so reliable. Note that today different types of leather substitutes are used, and the quality of this material usually directly depends on its price.

— Steel bracelet. The watch bracelet consists of links connected to each other; in this case they are made of stainless steel. This material is strong, durable, practically not subject to corrosion, moreover, it has a solid appearance and is quite pleasant to the touch; at the same time, the cost of steel allows it to be used even in inexpensive watches. Such bracelets are quite “heavy”, however, some owners consider this moment to be a virtue, because. it gives a feeling of solidity and reliability. And of any significant shortcomings of steel, one can only note high thermal conductivity — the bracelet will noticeably “cool” the hand if the watch has lain in the cold for some time (though not for long — just a few minutes).

— Milanese bracelet. Milanese are called metal bracelets made of links of very fine weaving (about 1 mm in size, or even less). The material of such a bracelet may be different; most often it is steel, but more expensive metals are also found. Anyway, such a bracelet has an original appearance, and also provides good air access, allowing the skin to breathe. Among the shortcomings of Milan, it can be noted that the links can “bite” the hair on the arm, creating discomfort. Thus, and also to keep the cost down, some watches do not use Milanese weave on the entire bracelet, but only on part of it (usually it is about half of the entire bracelet).

— Titanium bracelet. Bracelets made of titanium alloy are much stronger than steel, with less weight. They also conduct heat less well, making them better suited for cold weather. At the same time, titanium is characterized by almost all the same advantages: high strength and reliability, solid appearance, resistance to corrosion. Its main disadvantage is the high price, due to which this type of bracelet is found mainly in premium watches.

— Gold bracelet. Jewelery gold bracelets are mainly used with cases made of the same material (see the relevant paragraph). A watch with a gold bracelet is not so much a device for measuring time as a status accessory, or even a piece of jewelry; the latter is especially characteristic of female models.

— Silver bracelet. Silver bracelets are found exclusively in watches with cases made of the same material. Like the gold described above, this material is used not so much for practical as for fashion reasons — in order to give the watch a rich appearance and emphasize the status of its owner. At the same time, for a number of reasons, silver bracelets are extremely rare.

— Ceramic bracelet. A premium material found predominantly in women's watches (although there are also men's models with ceramic bracelets). Ceramic not only looks good, but also retains its original appearance for a long time — thanks to its excellent resistance to scratches, dirt and stains. In addition, this material has a relatively small weight; and the high cost in this case is more of a virtue — it emphasizes the high level of watches. Among the shortcomings of ceramic bracelets, some fragility can be noted — a strong blow can split the links.

— Plastic bracelet. This category includes both the actual bracelets, woven from individual links, and straps made of flexible plastic. The second variety is similar to rubber straps, see the relevant paragraph for more details. As for the bracelets, they are usually combined with cases made of similar materials (plastic or carbon), and can be used in different categories of watches — both relatively inexpensive and quite advanced. The quality of plastic in this case, usually, is directly related to the price category of the device.

— Tungsten bracelet. Bracelets made of tungsten alloy are highly durable and reliable; these properties are further emphasized by the fact that tungsten has a very high melting point. And yes, it does look good. At the same time, it does not have key advantages over other premium alloys (titanium, see above) and is noticeably more expensive due to the complexity of production. As a result, such bracelets are extremely rare, mainly in combination with cases made of the same material (see "Case Material").

— Aluminium bracelet. Quite a rare option, found in single watch models. Bracelets made of aluminium are lighter than steel, they are not inferior to them in terms of strength and reliability, however, they are more expensive.