Computer Cooling Alphacool

Alphacool Eiszapfen 13/10mm Chrome Compression Fitting - Six Pack

All requirements that are placed on a connection are fulfilled here: Highflow form processing and colouring. Uncompromising development and production have made the Eiszapfen what they are. In brilliant chrome and matte deep black there are two versions that fit perfectly into any system. With special processes the coatings are firmly bonded to ensure the longevity of the intense colours. Each port now has the Alphacool logo which makes it unmistakable in addition to its special shape! Due to the beveled edges of the union nut the O-ring is very firmly pressed against the hard tube making it even stronger than in its predecessors. This ensures more safety during transport. Design: straight …

The Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. PETG HardTubes are probably the easiest to bend compared to those made of other materials. They require significantly less heat than PMMA HardTubes, for example. The Alphacool Eisrohr PETG HardTubes are absolutely clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file , sandpaper or the Alphacool Strong Guy pipe and hose deburrer, as sharp edges can damage the O-rings of fittings. Technical data: …

High quality coating Alphacool uses advanced chromation to apply the colour to the brass fitting. This makes the colour not only more even, it is also significantly more durable and resistant to external influences. The small Alphacool logo is lasered and not printed. This means that it cannot be removed by friction.
Triple seal tightness is essential for a water circuit.
Installation: remove the union nut with the O-ring inside it. The connection is then screwed to any component with G1/4 inch thread. On the deburred HardTube, which you want to put in the fitting, the union nut is first pushed on and then the remaining O-ring is attached. The whole thing is then pushed into the fitting until …

Product Type:
Technical Details:
Dimensions:
Scope of Delivery:
Compatibility:

Alphacool Eiszapfen 16/10mm Chrome Compression Fitting - Six Pack

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! …

Alphacool Eiszapfen 16mm Deep Black Hard Tube Compression Fittings -

Alphacool Eisdecke D5 Acetal Pump Top - Black

With the Alphacool Ice Station you get a compact reservoir that fits into almost any housing. Highlights - 1. The lid is made of highly sturdy nylon - 2. Variety of mounting options - 3. Lighted logo and LED mounting options The Alphacool ice station expansion tank is extremely compact which is geared for the desired DDC pump. The pump is installed in the floor of the ice station and is not visible from the outside (Pump not included). The bottom of the ice station consists of a metal plate which increases the stability of the ice station. Mounting options It is possible to screw the ice station on a 2.5 "mount for SSD hard drives. It is also possible to mount in a 3.5 "slot. The screw connection …

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen. When developing the fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperatures. These can deform at 60 ° C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the start and keep the tubes in position. Deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which ensures a better hold. Through …

Water Cooling Accessory

Water Cooling Accessory / 6 piece / Alphacool Eiszapfen / 1 x G1/4"

Watercooling Soft Tube / Cable Length 800 mm

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen. When developing the fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperatures. These can deform at 60 ° C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the start and keep the tubes in position. Deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which ensures a better hold. Through …

Water Cooling Accessory / 6 piece / Alphacool Eiszapfen / 1 x G1/4"