Microphones Audio-Technica

Handheld dynamic microphone with USB digital output for use with computers and XLR analog output for use with conventional microphone inputs Smooth, extended frequency response ideally suited for podcasting, streaming, home studio recording and voiceover use Built-in headphone jack allows you to directly monitor from your microphone The circumaural design of the ATH-M20x contours around the ears for excellent sound isolation in loud environments Adjustable studio boom arm provides full 360° rotation and adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone

Clip-on lavalier mic also excels in acoustic guitar applications Provides crisp, full-sounding voice and instrument pickup Excellent gain before feedback and suppression of background noise Operates on phantom power only RoHS compliant

The Audio-Technica AT8175 is a pop filter designed for AT20 series microphones. It clips onto the front of the microphone and provides protection against plosives thanks to its perforated steel mesh. Compatible with the AT2020 AT2020USB-X AT2035 AT2050 and AT2020USB+ microphones. Please note: only comes with pop filter pictures with microphones are for representation purposes only

MT830cW Omni Condenser Lavalier Mic ATW-T1001 UniPak Transmitter ATW-R1100 Digital Receiver Use Up To 8 Systems Simultaneously Digital 24-bit/48 kHz Wireless

Great presence with excellent monitor cut Maximum feedback rejection Superior anti-shock engineering for low handling noise Tough, durable, resilient – built for the road Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Netwk-enabled Wireless System with 3000 Series ATW-T3201 Bodypack Transmitter AT831cH Lavalier Microphone - DE2 B (470MHz-530MHz) ATW-R3210N Receiver

Omnidirectional condenser capsule offers extended frequency response for extremely intelligible, natural vocal reproduction Lightweight, ergonomic design Extremely unobtrusive, 0.2-inch boom Secure under-the-ear placement Terminated with TA4F-type connector

The Audio Technica UniMount Universal Clip-On Mount is a specially-designed mounting solution for use with the Audio Technica AT350a microphones and goosenecks. The mount utilises secure rubber-lined clamping jaws which provide superior shock-resistance for the microphone whilst ensuring a firm grip to the instrument or surface without causing damage or sound dampening. The mount can be used to position the microphone and gooseneck horizontally or vertically enabling you to achieve the perfect microphone placement. A screw is included for locking the connected gooseneck into place. This rugged mount is built to an exceptionally high standard and is crafted from metal for road-worthy durability.…

Product 1: XLR output connects to a conventional analog microphone input providing versatile use with everything from multi-input home studio computer interfaces to professional mixing consoles. Product 1: The mic features a specially designed, integrated shock mount that tames noise, shock and vibration that’s transmitted through a mic stand, boom or mount. Product 1: The AT2040’s multistage foam mesh windscreen includes a nonwoven filter to allow close-up use without annoying pops. Product 1: With rugged, all-metal construction and a sound signature that commands attention, the AT2040 gives creators professional performance at an affordable price. Product 2: Standard mic cable

AT-GcW Guitar Cable ATW-T1001 UniPak Transmitter ATW-R1100 Digital Receiver Use Up To 8 Systems Simultaneously Digital 24-bit/48 kHz Wireless

Features: Audio Technica ATW-902a Wireless Handheld Microphone 169.505 - 171.905 MHz. Easy Operation and Clear, Natural Sound Quality. 4 Selectable Frequency-Coordinated Channels. Balanced XLR and Unbalanced 1/4" Output Jacks enable use with a wide variety of audio gear. Reliable performance and durable construction. Advanced dipole antenna system for extended operating rang. Operating Frequencies: High Band, 169 MHz to 172 MHz. Modulation Mode: FM. Maximum Deviation: +/- 10 kHz Dynamic Range: >/= 90dB (A-Weighted), typical. Total Harmonic Distortion: < 1% (at 1 kHz, +/- 10 kHz deviation). Operating Range: 200' feet. Operating Temperature Range: 40 F - 110 F. Frequency Response: 80 Hz - 13 kHz. Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system. Image Rejection: 50 dB minimum. RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: Nominal Output Level XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions (W x H x D): 7.48" x 1.82" x 5.06" inches. Net Weight: 12.0 oz. Accessory Included: Power Supply. Audio Output: Nominal Output Level. XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). Body-Pack Transmitter Specifications: RF Power Output: 10 mW. Spurious Emissions: Following federal and national regulations. Batteries: Two 1.5V AA (not included) Battery Life: 8 hours (alkaline). Dimensions: 9.91" inches (long), 2.11" inches (diameter). Net Weight: 9.2 oz. Accessory Included: AT8456a Quiet-Flex Stand Clamp…

The Audio Technica UniMount Magnetic Piano Mount is a specially-designed mounting solution for use with the Audio Technica AT350a microphones and goosenecks. The mount is equipped with a strong rare-earth magnet enabling you to mount an ATM350a mic and gooseneck to the metal frame of your upright or grand piano or any other metal part of the instrument or surface. A screw is included for locking the connected gooseneck into place. This rugged mount is built to an exceptionally high standard and features a soft felt lining across its base to protect your instrument/surface.

Utility USB microphone for computer applications Easily portable boundary mic plugs into USB input on a computer, tablet, smartphone or other device 1.8 m (6') Cable is terminated with USB-C connector, and comes with USB-C to USB-A adapter Slim-profile mount for easy attachment to flat-panel monitor or other surface. Omnidirectional pickup pattern offers full 360° coverage Integral clothing clip enables use as a lapel microphone

Specially Priced Package includes Audio Technica AT2020 with all items as packaged by Audio Technica, PLUS: (1) Tall Microphone boom Stand to position and mount the AT2020 when recording (1) Pop Filter to filter out plosives while recording vocals or speech, (1) 20 ft. Balanced XLR Microphone cable for connecting the microphone to a recording interface or mixer. Reminder: This microphone is NOT equipped with USB and will require a microphone preamp with 48v Phantom Power. For the USB version of this mic, see the Audio-Technica AT2020 USB. Sonic Sense One-Year Extended Warranty Adds One Year to Manufacturer's Warranty

Subminiature omnidirectional condenser capsule offers extremely intelligible, natural vocal reproduction Inconspicuous, lightweight headset with capsule diameter of just 2.6 millimeter is ideal for applications requiring minimum visibility Ergonomic under-ear design-the flexible, lightweight, contoured loop hooks behind the ear for an ultra-secure, comfortable fit even for those wearing glasses Handles high sound pressure levels with ease Terminated with a cH-style screw-down 4-pin connector for use with the included AT8545 power module

Wireless Microphone Set / Diversity System / Wireless / Frequency Range ISM / Range 30 m / Operating Time 7 h

Subminiature omnidirectional condenser capsule offers extremely intelligible, natural vocal reproduction Inconspicuous, lightweight headset with capsule diameter of just 2.6 millimeter is ideal for applications requiring minimum visibility Ergonomic under-ear design-the flexible, lightweight, contoured loop hooks behind the ear for an ultra-secure, comfortable fit even for those wearing glasses Handles high sound pressure levels with ease Terminated with a cW-style locking 4-pin connector