Microphones Audio-Technica

Smooth, extended frequency response with a slight rise occurring in the high-frequency region Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Rugged turned-brass microphone housing for enduring dependability State-of-the-art design and manufacturing techniques ensure compliance with a-t’s stringent consistency and reliability standards

For speech and live vocal applications Interchangeable Capsule design Mounts on atw-t3202 handheld transmitter Cardioid polar pattern 40 hz to 20 kHz frequency response

Product description : Audio-Technica AE6100 cable Type: Stage/Performance Microphone sensitivity: -55 dB Microphone frequency: 60 - 15000 Hz Connectivity : Wired Device interface: XLR-3 Microphone dimensions: 48 x 177 mm Microphone weight: 310 g Colour: Black, Grey, Red

169 to 172 MHz, 4 Selectable Channels Dipole Antenna for Extended Range Channel, RF, and AF Peak Indicator LEDs

Features: Audio Technica ATW-902a Wireless Handheld Microphone 169.505 - 171.905 MHz. Easy Operation and Clear, Natural Sound Quality. 4 Selectable Frequency-Coordinated Channels. Balanced XLR and Unbalanced 1/4" Output Jacks enable use with a wide variety of audio gear. Reliable performance and durable construction. Advanced dipole antenna system for extended operating rang. Operating Frequencies: High Band, 169 MHz to 172 MHz. Modulation Mode: FM. Maximum Deviation: +/- 10 kHz Dynamic Range: >/= 90dB (A-Weighted), typical. Total Harmonic Distortion: < 1% (at 1 kHz, +/- 10 kHz deviation). Operating Range: 200' feet. Operating Temperature Range: 40 F - 110 F. Frequency Response: 80 Hz - 13 kHz. Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system. Image Rejection: 50 dB minimum. RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: Nominal Output Level XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions (W x H x D): 7.48" x 1.82" x 5.06" inches. Net Weight: 12.0 oz. Accessory Included: Power Supply. Audio Output: Nominal Output Level. XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load). Body-Pack Transmitter Specifications: RF Power Output: 10 mW. Spurious Emissions: Following federal and national regulations. Batteries: Two 1.5V AA (not included) Battery Life: 8 hours (alkaline). Dimensions: 9.91" inches (long), 2.11" inches (diameter). Net Weight: 9.2 oz. Accessory Included: AT8456a Quiet-Flex Stand Clamp…

Great presence with excellent monitor cut Maximum feedback rejection Superior anti-shock engineering for low handling noise Tough, durable, resilient – built for the road Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

169.505 to 171.905 MHz Dipole Antenna for Extended Range Channel, RF, and AF Peak Indicator LEDs Balanced XLR & Unbalanced 1/4" Outputs