Other Hand Tools Bahco

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-14 Flat Bit 14mm

Bahco SB-3732 Series Nail Punch made from high-performance alloy steel. Fitted with a plastic handle. It has fully polished steel surface with a brilliant chrome finish.Tip size: 3.2 mm (1/8in).Length: 125 mm (5in).Additional Information:• Length: 125mm (5in)• Tip: 3.2mm (1/8in)

Bahco SB-3732 Series Nail Punch made from high-performance alloy steel. Fitted with a plastic handle. It has fully polished steel surface with a brilliant chrome finish.Tip size: 4.0 mm (5/32in). Length: 125 mm (5in).Additional Information:• Length: 125mm (5in)• Tip: 4.0mm (5/32in)

Replacement Leads for the BAHPMEC (Pack 5)

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-20 Flat Bit 20mm

Bahco SB-3732 Series Nail Punch made from high-performance alloy steel. Fitted with a plastic handle. It has fully polished steel surface with a brilliant chrome finish. Tip size 2.5 mm (3/32in). Length 125 mm (5in).

Bahco SB-3732 Series Nail Punch made from high-performance alloy steel. Fitted with a plastic handle. It has fully polished steel surface with a brilliant chrome finish. Tip size 2.0 mm (5/64in). Length 125 mm (5in).

Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish Phosphated. Contents knurl, pin & spring Left-handed screw Suitable for the following wrenches 8072, 8072 C, 9072, 9072 C, 9072 P, 9072 PC

The Bahco Mechanical Carpenter's HB Pencil requires no sharpening. It has a wide, strong lead that holds perfectly against rough materials. The angled shaped tip is ideal for precision marking when using a square. All contained within a high-impact ABS body that is rectangular shaped to avoid rolling. Replaceable lead that lasts up to 3x longer than standard pencils. Supplied with 3 leads.

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc. Gauge 0.8 mm /21g.

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-24 Flat Bit 24mm

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. 1 x Bahco 9629-25 Flat Bit 25mm

Bahco SB-3753N Series Centre Punch made from vanadium steel with a hexagonal shank. With fully polished steel surfaces and a brilliant chrome finish.Size: 8mm (5/16 in).Length: 150mm (6 in).Additional Information:• Length: 150mm (6in)• Tip: 8.0mm

Bahco SB-3734N Series Parallel Pin Punch made from vanadium extra steel. With a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish.Length: 150mm (6 in).Size: 6mm (1/4 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 6.0mm• Length: 150mm

This range of Bahco spare jaws are suitable for the series 80 and 90 adjustable wrenches. Possessing a left-hand screw and a phosphated finish, products 8075-1 and 8074-1 are the Spare Jaw Only, whilst 8075-2 is a spares kit containing a roll, pin and a spring. Features and Benefits Phosphated finish further protects the product from corrosion as well as wear and tear Easy way of keeping your series 80 and 90 adjustable wrench working to an optimum level Available in two sizes to suit your needs, as well as as a spares kit (product 8075-2 which contains a roll, pin and spring) Typical Applications Automotive Construction Plumbing DIY

Bahco SB-3753N Series Centre Punch made from vanadium steel with a hexagonal shank. With fully polished steel surfaces and a brilliant chrome finish. Size 2mm (5/64 in). Length 100mm (4 in)

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Gauge. 0.6 mm /23g.Additional Information:• Type: Cabinet Scraper• Scraper Width: 150mm

Bahco SB-3753N Series Centre Punch made from vanadium steel with a hexagonal shank. With fully polished steel surfaces and a brilliant chrome finish. Size 4mm (5/32 in). Length 120mm (4 3/4 in).

9629-30 Flat Bit 30mm

Bahco SB-3753N Series Centre Punch made from vanadium steel with a hexagonal shank. With fully polished steel surfaces and a brilliant chrome finish. Size 5mm (3/16 in). Length 120mm (4 3/4 in).

Spare Blades For 316-2 Reamer. Supplied as a pack of 2.Additional Information:• Type: Deburring Tool

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc. Gauge 0.8 mm /21g.