Other Hand Tools Faithfull

This Faithfull FAITLSILKIT is an all-in-one Silicone Scrapper Kit for a professional looking finish to silicone and grout. It has a multi-functional design for a professional finish to most household sealants, silicone, fillers, grout, etc. It is quick, clean and easy to use. After use, wipe tools clean and peel off waste when set. This kit contains two tools: A Silicone Remover with an angled blade for removing silicone and a detail cleaning tip for vertical corner cleaning.Also, a Silicone Finisher with a choice of five 'easy change' finishing profiles 3R 6R 10R 13R 17R and a flat surface cleaning blade. This tool also features a central blade for cutting cartridge outlets and nozzles.

Faithfull Tri-Point Speed Auger Bits will drill fast and clean holes in all types of wood. The three spurs and cutting edges create perfectly round holes with less chance of binding in the workpiece. Three flutes offer efficient waste removal making them much faster than traditional bits. A self-feeding screw tip enables accurate centring and pulls the bit through the wood. Precision machined from high-quality carbon steel with ground and honed cutting edges. The quick-release 1/4in hex shank is impact rated for use in impact drivers as well as all other corded and cordless drills. Specification: Overall Length: 159mmThis 3 piece Faithfull Tri-Point Speed Auger Bit Set contains sizes: 16, 20 …

The Faithfull 8 Piece Impact Rated Flat Bit Set will bore all types of timber, across or with the grain easily and cleanly. Each bit has precision ground points and cutting edges with extended spurs for faster cutting. The 1/4in hex shank can be used with quick-release systems and may be used with both mains and cordless drills. Supplied in a sturdy case. Sizes: 10, 13, 16, 20, 22, 25, 32 and 38mm. Overall Length: 152mm.Additional Information:• Diameter: Mixed Set• Overall Length: 152mm• Pack Qty.: 8

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Size: 100 x 225mm (4in x 9in).Additional Information:• Width: 100mm

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Size: 75 x 225mm (3in x 9in).Additional Information:• Width: 75mm

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Fitted with plastic safety grip. Size: 100 x 225mm (4in x 9in).Additional Information:• Width: 100mm

These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Fitted with plastic safety grip. Size: 75 x 225mm (3in x 9in).Additional Information:• Width: 75mm

The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily resharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mmAdditional Information:• Type: Cabinet Scraper• Scraper Width: 150mm

The Faithfull Bricklayer's Chisel and Point Mortar Pick. Its hardened point is used for raking out weathered mortar joints prior to repointing. The chisel end is used for dressing or removing mortar from bricks. Fitted with a hickory handle.Additional Information:• Type: Mortar Pick• Head Weight: 450g (16oz)• Shaft Type: Wooden• Handle Type: Wooden

The Faithfull Chisel Roll is made from a hard wearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection.This Faithfull Chisel Roll has the following specification: Pockets: 8Dimensions: 32 x 50cmAdditional Information:• Type: Chisel Roll• Pockets: 8• Material: Nylon Backed Polyester

The Faithfull Chisel Roll is made from a hard wearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection.This Faithfull Chisel Roll has the following specification: Pockets: 12Dimensions: 33 x 68cmAdditional Information:• Type: Chisel Roll• Pockets: 12• Material: Nylon Backed Polyester

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 150 x 13mm (6 x 1/2 in).Additional Information:• Length: 150mm (6in)• Width: 13mm (1/2in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 150 x 6mm (6 x 1/4 in).Additional Information:• Length: 150mm (6in)• Width: 6mm (1/4in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 200 x 13mm (8 x 1/2 in).Additional Information:• Length: 200mm (8in)• Width: 13mm (1/2in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 200 x 20mm (8 x 3/4 in).Additional Information:• Length: 200mm (8in)• Width: 20mm (3/4in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 200 x 25mm (8 x 1in).Additional Information:• Length: 200mm (8in)• Width: 25mm (1in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 250 x 20mm (10 x 3/4 in).Additional Information:• Length: 250mm (10in)• Width: 20mm (3/4in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 250 x 25mm (10 x 1 in).Additional Information:• Length: 250mm (10in)• Width: 25mm (1in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 300 x 13mm (12 x 1/2 in).Additional Information:• Length: 300mm (12in)• Width: 13mm (1/2in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 300 x 20mm (12 x 3/4 in).Additional Information:• Length: 300mm (12in)• Width: 20mm (3/4in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Size: 300 x 25mm (12 x 1 in).Additional Information:• Length: 300mm (12in)• Width: 25mm (1in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.1 x Faithfull Cold Chisel 457 x 20mm (18 x 3/4in)Additional Information:• Length: 457mm (18in)• Width: 20mm (3/4in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.1 x Faithfull Cold Chisel 457 x 25mm (18 x 1in)Additional Information:• Length: 457mm (18in)• Width: 25mm (1in)

Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°. Manufactured to BS 3066.Fitted with protective grip. Size: 300 x 25mm (12 x 1 in).Additional Information:• Length: 300mm (12in)• Width: 25mm (1in)