Other Hand Tools

This Priory 127 Engineers Scriber is a one piece constructed scriber for marking all metal. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long li more→fe.Specifications: Size: 125mm (5 in).Additional Information:• Type: Pocket• Size: 125mm

This Priory 129 Combination Scriber is double ended with a point and a knife edge. The knife edge is ideal for marking wood, plastic and laminates, and can also be used for scraping surfaces clean. It more→s knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specification: Size: 165mm (6.1/2in).Additional Information:• Type: Double Ended• Size: 165mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life. Wall more→eted set of 4 containing one of each of the following sizes. 1/16, 3/32, 1/8, and 3/16 in. Length 4 in

Priory 66 Series Nail Punch with a square head that provides a large striking area, it also stops the punch from rolling off the bench. Its precisely knurled body provides a firm grip. Designed to dri more→ve nail heads below the surface of the wood.Set of 4 in wallet. 1 of each 1/16in, 3/32in, 1/8in, 3/16in. Length 4inAdditional Information:• Length: 100mm (4in)• Tip: Mixed Set

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin more→punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).A set of 6 hexagonal bodied punches with extra long pins. Walleted as a set containing one of each of the following sizes. 1/8in, 5/32in, 3/16in, 7/32in, 1/4in and 5/16in.Additional Information:• Type: Set• Point Diameter: 1/8-5/6in• Length: Mixed Set• Pin Length: 63mm (2.1/2 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.Additional Information:• Type: Set• Point Diameter: 1/16-3/8in• Length: Mixed Set

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.Additional Information:• Type: Set• Point Diameter: 1/16-3/8in• Length: Mixed Set

The Priory 271 Automatic Centre Punch aids accuracy through the single handed operation which alleviates the need for a hammer. Depth of impression can be adjusted via the screw cap. Precision manufac more→tured. Specification Length: 125mm (5in)Additional Information:• Length: 125mm (5in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.14 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 13mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.14. Size: 13mm (1/2in).Additional Information:• Type: No.14• Size: 13mm (1/2in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.8 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 6.5mm belt punch is intended for cutting soft materials such as leather. Specifications:Type: No.8. Size: 6.5mm (1/4in).Additional Information:• Type: No.8• Size: 6.5mm (1/4in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.22 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 25mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.22.Size: 25mm (1in).Additional Information:• Type: No.22• Size: 25mm (1in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.6 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 5mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.6.Size: 5mm (3/16in).Additional Information:• Type: No.6• Size: 5mm (3/16in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.18 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. This 19mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.18.Size: 19mm (3/4in).Additional Information:• Type: No.18• Size: 19mm (3/4in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.12 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 10mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.12.Size: 10mm (3/8in).Additional Information:• Type: No.12• Size: 10mm (3/8in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.10 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 8mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.10.Size: 8mm (5/16in).Additional Information:• Type: No.10• Size: 8mm (5/16in)

This Priory Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The belt punch is intended for cutting soft materials s more→uch as leather.This Priory No.16 Hollow Belt Punch is made from carbon steel, and has a ground, tapered, section with a milled clearway for removing waste materials. The 16mm belt punch is intended for cutting soft materials such as leather. Specifications: Type: No.16.Size: 16mm (5/8in).Additional Information:• Type: No.16• Size: 16mm (5/8in)

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→10mm (3/8 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 10mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→12mm (1/2 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 12mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→3mm (1/8 in)Contents: A to Z plus & (and)Additional Information:• Character Height: 3mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→4mm (5/32 in)Additional Information:• Character Height: 4mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→5mm (3/16 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 5mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→6mm (1/4 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 6mm

Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. more→8mm (5/16 in)Contents A to Z Plus & (and)Additional Information:• Character Height: 8mm

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin more→punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 6.4mm (1/4 in).Additional Information:• Type: Long Pin Punch• Point Diameter: 6.4mm• Length: 152mm• Pin Length: 63mm (2.1/2 in)