Climbing Gear Beal

KEY FEATURES: Full of pure italian chalk.

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot. Name Flat Tape 26mm Standard EN 565 Certification CE Breaking load 1500 daN (kg) Material Polyamide Weight 42.5 g Tests performed internally not covered by any certification (Except CE) 1900 daN (kg)

This new generation chalk is better suited to the needs of climbers whether indoors or bouldering. On indoor walls PURE GRIP makes no dust and lasts twice as long. When bouldering, the grip obtained with PURE GRIP, compared to powder chalk, is exceptional. KEY FEATURES: Does not pollute the rock. Does not make dust. Very good capacity: 250 ml.

Screwgate Carabiner / Breaking Strength Lengthways 23 kN / Aluminium / Snapgate Opening 19 mm / Screw Closure / 44 g / Security Standard EN 12275

Carabiner particularly suitable for frequent use as it is easy and quick to lock and unlock. It is very effective during repetitions of maneuvers on anchor Norm EN 12275 B | EN 362 B Weight 44 g Material AL Dimensions 105x60mm Ouverture 19mm Résistance Grand Axe 23 kN (2300 kg) Résistance Petit Axe 9 kN Résistance Doigt Ouvert 8 kN

Carabiner particularly suitable for frequent use as it is easy and quick to lock and unlock. It is very effective during repetitions of maneuvers on anchor Norm EN 12275 B | EN 362 B Weight 44 g Material AL Dimensions 105x60mm Ouverture 19mm Résistance Grand Axe 23 kN (2300 kg) Résistance Petit Axe 9 kN Résistance Doigt Ouvert 8 kN

Carabiner particularly suitable for frequent use as it is easy and quick to lock and unlock. It is very effective during repetitions of maneuvers on anchor Norm EN 12275 B | EN 362 B Weight 44 g Material AL Dimensions 105x60mm Ouverture 19mm Résistance Grand Axe 23 kN (2300 kg) Résistance Petit Axe 9 kN Résistance Doigt Ouvert 8 kN

Asymmetric screwgate karabiner for lanyards. Its design and shape make it particularly easy to use at the end of a lanyard to clip to a belay. When a belay device is used, this asymmetrical karabiner ensures that the device is always guided towards the karabiner’s apex. Keylock system

To protect the rope, BEAL have devised a carabiner suited to sport climbing and repeated falls: the BE ONE. The ‘receiving zone’ has been enlarged to allow for the rope to flatten during a fall without introducing lateral friction. The rope runs more freely and absorbs the fall more effectively. The contact surface area has been optimised through the use of a cylindrical profile with a 12 mm diameter. This is less restrictive for the rope and minimises wear caused by repeated falls. KEY FEATURES: Minimised rope wear. Improved rope running. Better softening of the fall. Eases pulling up slack to clip.

Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc… STRONG POINTS - Keylock system - Screw cap. - Breaking strength lengthwise: 22 kn - Breaking strength crosswise: 8 kn - Breaking strength open gate: 6 kn - Weight: 74 g. - Authentication: En 362: 2004 / b, en 12275: 2013

5.5mm sewn rope sling made with an aramid core and polyamide sheath. When configured as a prusik it can be used with every rope diameter. The wide, straight groove offers edge-free running of the rope

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

Screwgate Carabiner / Breaking Strength Lengthways 24 kN / Aluminium / Snapgate Opening 17 mm / Screw Closure / 58 g / Security Standard EN 12275

An extendable gear loop allowing tools to remain attached whilst in use. Clic clac system CONSISTS OF TWO SECTIONS An extendable spiral cord that attaches to the TOOL-BUCKET, GLASS BUCKET, LONG TOOL BUCKET, to the HERO PRO, SYNCRO and STYX harness, or the AIR-SIT work seat. A gear loop that connects to the end of the spiral cord. This is designed to attach tools by means of a girth hitch or slipknot (it is important you select an attachment method appropriate for the specific tool). A reinforced webbing loop on the gear loop allows the tool to be clipped to the harness using a karabiner between uses The gear loops are available separately. All tools equipped with gear loops can

Large HMS belaying carabiner with locking screw gate. It is particularly suitable for rope work with double ropes (clove hitch and Italian hitch). The generous contact surface area enables smooth working of ropes even when wet. Keylock system Uses Belay Norm EN 12275 H | EN 362 B Weight 86 g Material AL Dimensions 121x76mm Ouverture 22mm Resistance Grand Axe 26 kN (2600 kg) Resistance Petit Axe 8 kN Resistance Doigt Ouvert 8 kN

Large HMS belaying carabiner with locking screw gate. It is particularly suitable for rope work with double ropes (clove hitch and Italian hitch). The generous contact surface area enables smooth working of ropes even when wet. Keylock system Uses Belay Norm EN 12275 H | EN 362 B Weight 86 g Material AL Dimensions 121x76mm Ouverture 22mm Resistance Grand Axe 26 kN (2600 kg) Resistance Petit Axe 8 kN Resistance Doigt Ouvert 8 kN

Compact screwgate carabiner particularly suited to single ropes used in conjunction with your belay device. The contact surface area has been optimised through the use of a cylindrical profile with a 12mm diameter. This is less restrictive for the rope, limiting its wear when lowering climbers and enhancing its handling when paying out slack. Keylock system USES Belaying and top roping. Norm EN 12275 B Weight 58 g Material AL Dimensions 94x57mm Ouverture 17mm Resistance Grand Axe 24 kN (2400 kg) Resistance Petit Axe 7 kN Resistance Doigt Ouvert 7 kN  

Compact screwgate carabiner particularly suited to single ropes used in conjunction with your belay device. The contact surface area has been optimised through the use of a cylindrical profile with a 12mm diameter. This is less restrictive for the rope, limiting its wear when lowering climbers and enhancing its handling when paying out slack. Keylock system USES Belaying and top roping. Norm EN 12275 B Weight 58 g Material AL Dimensions 94x57mm Ouverture 17mm Resistance Grand Axe 24 kN (2400 kg) Resistance Petit Axe 7 kN Resistance Doigt Ouvert 7 kN