Climbing Gear Protekt

L - Length: 1 m Rope diameter Ø: 6.3 mm Coating: PWC Rope: galvanized steel Max. number of users: 1 Static strength: 30 kN

Its elements are made of stainless steel. The parts are suitable for use with one or two textile ropes or webbings. The device is mounted to the rope using the AY 025 connector (included). Material: stainless steel Weight: 1,300 g Dimensions: 180 x 175,5 mm Number of modules: 1

The AT 250 hooking device is a portable anchor point, adapted for use with an I-beam rail. The rail must be permanently attached to the fixed structure. Material: aluminum Dimensions: 440 x 100 x 45 mm Weight: 1.37 kg Hook point hole diameter Ø: 50.8 mm Spacing min: 100 mm Spacing max: 400 mm Max. number of users: 2

1. Destination Tree climbers are used to climb the trees performing various works at heights e.g. during gathering fruits or seeds. 2. Construction  Hook with stirrup  Spike  Guard pad  Strap 3. Installation To put on the tree climber place the stirrup under a sole of your boot next to the heel.The spike should be situated on the inner side of a foot. Tree climber should be tightly fastened to the leg by two straps, under the ankle and on the calf. 4. Climbing a tree The tree climbers have to be used with additional protection against falling (full body harness with fall arrester) and slipping down (safety belt with a lanyard wrapped around the tree).

Steel climbing spikes with adjustable soft calf padding height. Technical specification Weight of the pair: 3.8 kg Manufacture Construction: steel Construction finish: powder coating Straps: waterproof coated fabric Padding: natural leather, felt Equipment Long gaffs: SP054 Short gaffs: SP053