Other Hand Tools

Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.Additional Information:• Type: Cleaning Tool

The Monument 3034T Copper Fitting Cleaning Brush has stiff steel bristles for cleaning copper fittings and socket formed joints on copper pipe, prior to soldering. Specifications: Size: 15 & 22mm.Additional Information:• Type: Cleaning Tool

The Monument 331E Crutch End Domestic Stopcock Key has been designed for turning on and off hard-to-reach or difficult stopcocks, such as under kitchen units, sinks and stiff to turn outside taps. The design provides increased leverage and is supplied with a removable tommy bar in hexagon shaft. This allows it to connect to a socket and ratchet handle for ease of use in difficult corners.Additional Information:• Head Type: Crutch• Length: 220mm

The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.Additional Information:• Head Type: Crutch• Length: 1070mm

Monument Internal / External Pipe End Deburrer is capable of deburring pipes up to 35mm in diameter.Additional Information:• Type: Deburring Tool

The Monument, pack of 3, Boiler Flue Brushes (MON3014J-1), contains the following brush sizes: 16mm diameter, 50mm diameter and 50 x 16mm.Additional Information:• Type: Cleaning Tool

Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general-purpose applications. Head Length: 10mm.Total Length: 195mm.Pack Quantity: 5.Additional Information:• Type: Cleaning Tool

The Monument 437A Adaptor connects the 430F professional soldering and brazing torch (UNEF 7/16 in) to 1in US-Style bottles e.g., propane, MAPP® and MAPPro®.Made in BritainAdditional Information:• Type: Accessories

This Monument 438D Adaptor Primus 2000 To 430F adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g., Primus®2000 and Calor®340.UNEF: 7/16in.Made in Britain.Additional Information:• Type: Accessories

The Monument 4501F GRIP+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Additional Information:• Type: Radiator Valve Tool

The Monument 4507X GRIP+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Type: TRV Tail Spanner

The Monument 4508A GRIP+ T7 3-Prong Gate Valve Tool is for closing and opening damaged gate valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Type: Spanner

The Monument 4534X GRIP+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G GRIP+ shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access. Made in Britain.Additional Information:• Type: Fitting for Box Spanner

The Monument 4537G GRIP+ Shorty Handle fits Monument GRIP+ Sockets and Tools for back nut box spanners, radiator valves, taps, pumps and cabinets allowing improved access. It is the innovative advancement to the best selling Professional Adjustable Basin Wrench MON345. The unique shape of the swivelling head has additional sockets and tools to fit many radiator valves, back nut box spanners, taps, pumps and cabinets. Originally conceived by Arthur Collier in 1958 and still......Made in Britain.Additional Information:• Type: Handle

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in body, use parallel bush series.Cutters are case hardened, feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits 1/2in and 3/4in BS5412 bevelled seats. Complete with 17, 20 mm (11/16 in, 13/16 in) Bevelled Cutters. One double bush.Additional Information:• Size: 1/2 & 3/4in• Type: Bevelled

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in the body, use the parallel brush series.Cutters are case hardened and the feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits 1/2in and 3/4in BS1010 new series and BS5412 Flat and Bevelled seats. Complete with 17, 19, 20, 25 mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters. Two double bushes.Additional Information:• Size: 1/2 & 3/4in• Type: Bevelled & Flat

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.Additional Information:• Size: 1/2in• Type: Flat

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series.Cutters are case hardened. The feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.Additional Information:• Size: 1/2 & 3/4in• Type: Flat

The Monument 170 Stiffnuts, 27 x 32mm, Kit has been especially designed for removing stiff backnuts from awkwardly placed taps, and to make tap installation a more rapid process.This tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts.Ideal for 24mm A/F, 25mm A/F, 26mm A/F and ribbed, 27mm A/F, 29mm A/F & ribbed, A/F 32mm. It comes complete with 3/8-inch cordless drill adaptor and a full user instruction manual. Specifications: Capacity: 1/2in & 3/4in.Pack Quantity: 6 Pieces.Additional Information:• Type: Box Spanner• Capacity: 1/2in …

Monument 83 tool has been designed to make the job of fitting both 15 & 22mm tank connectors easy. Traditionally the task of fitting a connector to a domestic cold water tank has been awkward and required 2 pairs of hands or very long arms. The tool engages with the dog drive of the tank connector and can then be used one handed whilst the nut of the tank connector is tightened. Size: 15 & 22mm.Additional Information:• Type: Connector• Size: 15/22mm

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.The Monument Autocut Twin Pack contains the following: 1715C: Size: 15mm.1722Y: Size: 22mm Not for use on stainless steel. Spare wheel to fit is available MON269.Additional Information:• Type: Pipe Cutter• Capacity: 15mm/22mm• Copper: Y

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.Additional Information:• Type: Pipe Cutter• Capacity: 12mm• Copper: Y

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.Monument MON1715 Autocut Pipe Cutter. Size: 15mm.Additional Information:• Type: Pipe Cutter• Capacity: 15mm• Copper: Y

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.Monument MON1722 Autocut Pipe Cutter. Size: 22mm.Additional Information:• Type: Pipe Cutter• Capacity: 22mm• Copper: Y