Bits & Sockets Sets Bosch

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat treatment process results in extra-hard quality fo…

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-a more→lloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

The BOSCH PROFESSIONAL Profiling 8x31.8x54 mm Router Bit Grey is a high-quality electric tool accessory specifically designed for drilling wood. This router bit is perfect for creating intricate profi more→les and edges on wooden surfaces, making it an essential tool for carpenters, woodworkers, and DIY enthusiasts.The router bit features a grey color coating, which not only enhances its durability but also gives it a sleek and professional look. With a diameter of 8mm, a shank size of 31.8mm, and a cutting length of 54mm, this bit offers precise and efficient drilling performance.Made from high-quality materials, this router bit is built to withstand heavy-duty use and provide long-lasting performance.…

Do not use on shank sleeves. The Collet holds router bits. The correct Collet size must be used at all times to avoid danger when operating. Collet • Holds Router Bits • Collet holds route more→r bits • Correct Collet size must be used at all times to avoid danger when operating • Do not use on shank sleeves Specifications: Diameter mm: 8,00 Key width mm: 24

The BOSCH PROFESSIONAL Expert SDS Max-8x 22x200x320 mm Wall Hammer Drill Bit Grey is a high-quality and reliable drill bit designed for professional use. This drill bit is specifically engineered to p more→rovide efficient and precise drilling in concrete, masonry, and other tough materials.The SDS Max-8x drill bit features a sturdy construction with a carbide-tipped head, ensuring durability and long-lasting performance. The 22mm diameter and 200mm length make it suitable for drilling holes of different sizes.One of the standout features of this drill bit is its innovative flute design, which offers rapid drilling and efficient material removal. This design also reduces the risk of bit jamming, thereby …

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate gen more→erates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. Drive ISO 1173 C6.3, 1/4" external hex shank • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat tr…

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter more→nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

Lasts up to 3 times longer than Bosch SDS plus-3 bit - Drilling in reinforced concrete is hard work and has traditionally taken its toll on hammer bits.Conventional two-flute bits get stuck in rebar a more→nd sometimes break.The solid carbide head of the EXPERT SDS plus-7X features an advanced 4 cutting edge design made from a single piece of the strongest metal:Will not bind and has no weakness on impact.Thanks to Bosch Carbide Technology and a solid carbide head, the EXPERT SDS plus-7X lasts much longer than conventional hammer bits.Drills through rebar effectively, so there´s no need to stop, re-aim, or change bits when hitting steel.For construction professionals who regularly drill into concrete a…

It has a 1/4-inch external hex shank and is intended for use with screwdrivers and drill drivers. The Universal Holder One-Click offers easy bit changes with extra-firm bit hold in universal screw-dri more→ving applications. It features a One-Click Function on the chuck that allows one-handed bit changes and further supports the strong bit hold. Furthermore, a permanent magnet ensures a firm and secure grip of the bits in use. The Universal Holder is excellent for all fixing jobs requiring power tools.Universal Holderwith one-click function and permanent magnet• One-Handed Bit Changes with Extra-Firm Hold• Universal Holder One-Click offers easy bit changes with extra-firm bit hold in universal …

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-a more→lloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

This drill bit has a cylindrical shank system. The Brad Point Drill Bit offers precise drilling in soft and hard wood and can be used for through-holes and pocket holes. Its extremely sharp drill bit more→with a centring tip allows for exact hole positioning. Tear-free holes are produced by high-quality shoulder cutters with precise edges. For exact results, the two flutes prevent material from clogging the hole and provide good material removal. This drill bit is suitable for use on soft and hard wood.5-piece brad point drill bit set, 1/4" hex shank• Precise Drilling in Wood• Brad Point Drill Bit offers precise drilling in soft and hard wood• Extremely sharp drill bit with a centring …

Features:- Centring Tip Allows For Accurate Positioning Of The Hole For Exact Results- Special Flute Supports Chip Extraction And Prevents Jamming For A Precise Hole Diameter- Tear-Free Holes Are Prod more→uced By Its Finely Ground Drill Bit Tip With Two Scoring Spurs- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications: - Softwood- Hardwood- Diameter (D) Mm: 18.00- Working Length (L1) Mm: 190- Total Length (L2) Mm: 250- Width Across Flats (D) Mm: 10

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…