Bits & Sockets Sets Trend

Trend Snappy 9.5mm diameter TCT countersink - with adjustable pilot drill 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory fo more→r clean, consistent finishes. TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to No8 gauge in softwood and No6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; …

A Trend Snappy Shank Lip And Spur 5Mm Hss Drill Bit Guide Which When Used With A Template Will Allow 5Mm Diameter Blind Holes To Be Drilled For 5Mm Shelf Supports.PTDTREDIRSNAPSS5MM

Trend Snappy Forstner Bit 15mm Trend are the UK's leading brand of router cutters, routing jigs and routing accessories and are available from...

Tungsten Carbide tipped version of the popular Trend Snappy drill countersink with adjustable HSS drill.

Tungsten Carbide Tipped Masonry Drill Bit Set With Colour Depth Bands To Suit Wall Plugs. Colour Bands On Drills Allow Easy Selection Of Wall Plug And Allow For Setting Of Drilling Depth To Suit Wall more→Plug.5Mm Drill With Yellow Band.5.5Mm Drill With Orange Band.6Mm Drill With Red Band.7Mm Drill With Brown Band.8Mm Drill With Grey Band.For Drilling Into Plaster Walls Plasterboard Mortar Brick And Building Blocks.PTDTREDIRSNAPMD2SET

Pack Of 5 Extra Long Drills To Suit Drill Bit Guide.PTDTREDIRSNAPDB9L5

Pack Of 5 Extra Long Drills To Suit Drill Bit Guide.PTDTREDIRSNAPDB7L5

High Quality Forged And Ground Carbon Steel Short Forstner Bit For Drilling Accurate Holes.For Use With The Trend Snappy Quick Chuck.Clean Precise Holes In Softwood And Hardwood.Will Also Drill Overl more→apping Holes.Forged Steel Provides Longer Life Before Resharpening.With Centre Point Two Peripheral Cutting Edges And Two Lifters.PTDTREDIRSNAPFS18

Made From Carbon Steel And Precision Machined.Auger Has A Spiral Point Single Flute. Ideal For Quick Clean Deep Holes. Must Only Be Used With Torque Control Drills To Prevent Wrist Injury.PTDTREDIRSNAPAB13

Description PREMIUMQUALITY:Madefromhigh-qualityforgedandgroundCarbonSteel,theTrendSnappyForstnerBitensuresdurabilityandlonglifespan.

Spare Long Series Hss Drill Bit For The Trend Snappy Drill Bit Guides.PTDTREDIRWPSNAPD9L

This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting dep more→th stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals.

Trend Uni/Cs Countersink

Trend Snappy 12.7Mm Diameter Tct Countersink - With Adjustable Drill 12.7Mm Diameter Countersink With Clearance Drill Designed For Metric Screws Up To 6Mm Diameter Shank.The Perfect Fast Swap Accesso more→ry For Clean Consistent Finishes.Tct Cutting Tips For Assured Long Life Performance In All Timbers And Abrasive Timber Based Materials Including Ply Mdf And Chipboard. Fitted With High Quality 5Mm Diameter Replaceable Hss (High Speed Steel) Drill Ideal For Clearance Holes In Metric Screws Up To 6Mm Gauge.Easily Adjustable Drill Length For Different Timber Thicknesses And Fast Alignment. Can Be Used To Make Countersinks And Can Also Be Used For Counterbores; Ideal For Use With Trend Snappy Snap/Pc/127T …

Pack of 10 spare drills to suit the drill countersinks.

Replacement Drill Bit.PTDTREDIRWPSNAPD564

Pack of 10 spare drills to suit the drill countersinks.

Trend Trade Straight Cutter - 15Mm Diameter15Mm Diameter X 25Mm Cut Length For Heavy Duty Slotting Grooving And Rebating With Templates Side Fences Or In A Router Table Using A 1/2In Shank Router.Cen more→tre Tip Design For Drilling And Stopped Cut Applications For Premium Results In All Materials.High Quality Micro-Granular Tungsten Carbide Cutting Edges For Maximum Performance And Durability On Laminate Chipboard Ply Mdf And Solid Timber.K Mark Shank To Ensure Safe Working Practices.Supplied In A Storage Tube For Maximum Protection When Transporting From Job To Job.PTDTREDIRTR40DX12TC

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Ideal for use with the Trend Hinge Jig. D 15/32 inch D 12 mm C 19 mm Overall Length 70 mm Shank more→Diameter 1/4 inch Please note: This cutter is especially suited for drilling. For use with the Trend Hinge Jig and Lock Jig.

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges it has a TCT blade for longer life.Thi more→s bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4inPTDTRET4213514T

Trend 35Mm Hinge Sinking Cutter - 8Mm Shank For Melamine Faced BoardsAffordable Cutter For Drilling 35Mm Diameter Recesses For Euro Style Kitchen Hinges. Tct (Tungsten Carbide Tipped) Cutting Faces Fo more→r Durable Long Life Performance.Perfect For Use On Melamine Faced Boards With Abrasive Cores Such As Chipboard And Mdf.Accurate Consistent Drilling Ensures Quicker Results When Doing Single Jobs Or Batch Work.Designed For Pillar Drill Use The 8Mm Diameter Shank Will Fit Smaller Drills For Maximum Compatibility.PTDTREDIRT42035X8MMTC

...

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in...

Trend Snappy Robertson No2 Driver Bit - 150mm long 150mm long bit ideal for use with Trend Pocket Hole screws and Pocket hole Jigs Allows screws to be driven in easily at the correct angle when asse more→mbling pockethole joinery without the drill chuck catching the workpieces. For use with Robertson screws; the ideal fixing for maximum driving performance without cam out issues. 1/4in hex shank for a direct fit for impact drivers or all Trend Snappy chucks ensuring fast swapping between accessories. Bit size of1/8in (3.2 mm) covers the most popular screw sizes. Specifications • Shank Diameter: 1/4 hex • Dia Metric: 3.2 • Dia Imperial: 1/8 • Overall Length Metric: 150 • …