Bits & Sockets Sets Bosch

Do not use on shank sleeves. The Collet holds router bits. The correct Collet size must be used at all times to avoid danger when operating. Collet • Holds Router Bits • Collet holds route more→r bits • Correct Collet size must be used at all times to avoid danger when operating • Do not use on shank sleeves Specifications: Diameter mm: 8,00 Key width mm: 24

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The Impact Control Universal Holder Quick Release offers easy bit changes and an extra-firm bit hold in universal screwdriving applications. A permanent magnet ensures firm and secure gripping of the more→bits in use. Furthermore, a Quick Release Function on the chuck enables fast and easy bit changes and further supports the strong bit hold. The Universal Holder is excellent for all fixing jobs requiring power tools. The holder is part of the Bosch Pick and Click system, which enables individually buildable accessory sets for fully customisable bit collections. Click-fitting slots perfectly secure individually purchased packs for a personalised collection and the easy replacement of old packs. It …

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. Drive ISO 1173 C6.3, 1/4" external hex shank • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat tr…

Additionally, The Bit Is Extra Short And Stable For Drilling In Confined Spaces. Active Cutting And Perfect Centring Without Wandering Are Achieved By The Pointed Split-Point Tip, Making Pre-Punching more→Unnecessary.It Is Intended For Handheld Drills (Drill Drivers) And Drill Stands.Features: - Extra Short And Stable For Drilling In Confined Spaces- Active Cutting And Perfect Centring Due To A Pointed Split-Point Tip, Making Pre-Punching Unnecessary- Usable At Both Ends Due To Two Drill Bit Tips And Flutes- Extra Short And Stable For Drilling In Confined Spaces- Double-Ended Screwdriver Bits.Specifications: - Steel- Cast Iron- Diameter (D) Mm: 3.30- Working Length (L1) Mm: 11- Total Length (L2) …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. Display • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat treatment process results in extra-hard qu…

Contains LS 0.6 x 4.5, LS 0.8 x 5.5, LS 1.2 x 6.5 head size bits
For all brands (screw drivers and drill/drivers)
Bosch bits always provide a practical soltution
Drive as per DIN more→3126-C6.3 for use in universal holders
Find the right bit for every application and for every conventional screw

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guid more→ance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its more→increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

Bosch 2608836645 SDS Plus-5X Hammer Drill Bit 22.0mm x 400mm x 450mm The Bosch 2608836645 is a single SDS Plus-5X drill bit with a diameter of 22.0mm and a working depth of 400mm. SDS Plus bits offer more→highly efficient drilling in reinforced concrete and masonry. They have a 4-flute design which provides fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. The centring tip prevents wandering and geometrical form prevents jamming. Features:
- SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete
- Geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
- “Turn-angle” head and 4-flute design prov…

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Cyl-3 Drill Bit Provides Lasting Performance When Drilling In Concrete.Features:- High Wear Resistance From A Durable Carbide Blend Developed And Manufactured By Bosch- Effective 2-Flute U-Shape Desig more→n Provides Good Dust Removal, Reducing Friction And Extending Lifetime- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications:- Diameter (D) Mm: 10.00- Working Length (L1) Mm: 80- Total Length (L2) Mm: 120