Bits & Sockets Sets Bosch

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Set containing high-performance metal drill bits with high-grade titanium nitride coating for a particularly long service life and fast drilling progress. Bit diameters in 0.5 mm steps from 1-10 mm. more→Drill bit tip with 135° and split point manufactured to DIN 1412C

Precise Drilling In Wood:- Machine Wood Drill Bit offers precise drilling in soft and hard wood- Centring tip allows for accurate positioning of the hole for exact results- Special flute supports chip more→extraction and prevents jamming for a precise hole diameterSpecifications:- Diameter (D) mm: 10.00- Working length (L1) mm: 340- Total length (L2) mm: 400- Shank diameter (d) mm: 10

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its more→increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill …

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel) more→, which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

The distance between the guide and the router bit must be taken into consideration when making a template for use with a template guide. This distance is calculated with the following formula: diamete more→r of template guide (K) – diameter of router bit (F))/2. The Template Guide for routers runs along templates transferring shapes onto the workpiece. It is indispensable when working with templates and offers a quick-fastening Bayonet lock for rapid tool-free changing. Template guide with quick fastening lock, tool-free • Runs Along Templates, With Quick Fastening Lock • Template Guide for routers runs along templates transferring shapes onto the workpiece • Indispensable when wo…

The SDS max-9 BreakThrough Drill Bit is standard when drilling large and deep holes in concrete. Its 3-cutter tip made from fine-grade carbide is vacuum-brazed and hardened to enable fast results and more→good removal of large pieces of material. The bit´s long tapered shank makes breakthrough-drilling possible, while its 2-flute U-shape design provides good dust removal. The bit is intended for breakthroughs with diameters from 45 mm to 80 mm in concrete, masonry and limestone, e.g. for fixing cables and pipes outside. Note: Always ensure that you use hammer drills with suitable capacity for breakthrough-drill bits to avoid overload. Observe the operating instructions of the rotary hammer. It is i…

The BOSCH PROFESSIONAL X-Line Drill Bit And Screwdriver Bit Set is a comprehensive accessory kit for electric tools, specifically designed for drilling and screwdriving tasks. With 60 units included i more→n the set, it offers a wide range of drill bits and screwdriver bits to cater to various applications and materials.The set is highlighted by its high-quality construction and durability, ensuring long-lasting performance even in demanding tasks. The drill bits are made from high-speed steel (HSS) and have been designed with precision-ground cutting edges to deliver clean and accurate holes in different materials such as wood, metal, and masonry. The screwdriver bits are engineered to provide optimal …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks.Drive ISO 1173 C6.3, 1/4" external hex shank• Universal Use• The Extra Hard Screwdriver Bit is a good choice for universal use• S2 Modified Steel and an optimised heat treatment pr…

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-a more→lloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter more→nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Bosch 2607002801 T30 Extra Hard Screwdriver Bits (Pack Of 25) The Bosch 2607002801 is a pack of 25 Extra Hard, 25mm long T30 bits stored in a handy tic tac box for ease of storage and bit identificati more→on. Features:
- The Extra Hard Screwdriver Bit is a good choice for universal use
- S2 Modified Steel and an optimised heat treatment process results in extra-hard quality for adequate performance
- The tapered torsion zone copes easily with torque peaks, fulfilling all tasks Specification:
- Part number: 2 607 002 801
- Dimensions: T30
- Length: 25mm
- Pack quantity: 25 Pcs